Part Circle/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Docnav/ru |Плоская Спираль |Эллипс |Part(Деталь) |IconL=Part_Spiral.svg |IconR=Part_Ellip...")
No edit summary
Line 12: Line 12:
{{GuiCommand/ru
{{GuiCommand/ru
|Name=Part Circle
|Name=Part Circle
|Name/ru=Part Circle
|Name/ru=Окружность
|MenuLocation=Деталь → [[Part_Primitives/ru|Создать примитивы...]] → Circle
|MenuLocation=Деталь → [[Part_Primitives/ru|Создать примитивы...]] → Окружность
|Workbenches=[[Part_Module/ru|Part]]
|Workbenches=[[Part_Module/ru|Part]]
|SeeAlso=
|SeeAlso=

Revision as of 08:18, 2 May 2021

Окружность

Системное название
Part Circle
Расположение в меню
Деталь → Создать примитивы... → Окружность
Верстаки
Part
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Description

This command will create a circular curved edge. With the default values, the circular curved edge will be closed and therefore will be a circle. If the properties Angle 0 or Angle 1 are changed from their default values (0 and 360) the edge will be an open curve, an arc.

Alternatively a Part Circle can be initially defined from three points. Once created the circle will only contain the standard Part Circle properties and will no longer contain a reference to the creation points.

Usage

A Circle geometric primitive is available from the Create Primitives dialogue in the Part workbench.

  1. Switch to the Part
  2. There are several ways to access the Create Primitives dialogue:

Properties

  • Radius: the radius of the curved edge (arc or circle)
  • Angle 0: start of the curved edge, (degrees anti-clockwise), the default value is 0
  • Angle 1: end of the curved edge, (degrees anti-clockwise), the default value is 360