Arch Лестница

From FreeCAD Documentation
Revision as of 05:16, 27 August 2022 by Evgeniy (talk | contribs) (Created page with "* {{PropertyData|Blondel Ratio|Float}}: (только для чтения) Рассчитанный коэффициент Блонделя. Это соотношение по...")

Лестница

Системное название
Arch_Stairs
Расположение в меню
Arch → Лестница
Верстаки
Arch
Быстрые клавиши
S R
Представлено в версии
0.14
См. также
Структура, Оборудование

Description

Описание

Инструмент лестницы позволяет автоматически создавать несколько типов лестниц. В настоящий момент поддерживаются только прямые лестницы (с или без центральной посадки). Лестница может быть построена с нуля или с прямой line, и в этом случае лестница следует за строкой. Если линия не горизонтальна, а имеет вертикальный наклон, лестница также будет следовать ее наклону.

См. Stairs entry in wikipedia для определения различных терминов, используемых для описания частей лестницы.

«На вышеупомянутом изображении были созданы две лестницы, одна с массивной структурой и посадкой, а другая с одним стрингером».

Опции

  • Лестницы разделяют общие свойства и поведение всех Arch Components

Usage

Использование

  1. Нажмите кнопку Arch Stairs или нажмите клавиши S, R
  2. Adjust the desired properties. Some parts of the stairs, such as the structure, might not appear immediately, if any of the properties makes it impossible, such as a structure thickness of 0.

Свойства

Data

Segment and Parts

  • ДанныеAbs Top (Vector): (read-only) The absolute top level the stairs lead to.
  • ДанныеLast Segment (Link): Last segment (flight or landing) of an Arch Stairs connecting to this segment. The start level of the stairs will be the end level of this last segment.
  • ДанныеOutline Left (VectorList): The left outline of the stairs.
  • ДанныеOutline Left All (VectorList): The left outline of all segments of the stairs.
  • ДанныеOutline Right (VectorList): The right outline of the stairs.
  • ДанныеOutline Right All (VectorList): The right outline of all segments of the stairs.
  • ДанныеRailing Height Left (Length): Height of the left railing of the stairs or landing.
  • ДанныеRailing Height Right (Length): Height of the right railing of the stairs or landing.
  • ДанныеRailing Left (String): Name of the left railing object.
  • ДанныеRailing Offset Left (Length): Offset of the left railing from the edge of the stairs or landing.
  • ДанныеRailing Offset Right (Length): Offset of the right railing from the edge of the stairs or landing.
  • ДанныеRailing Right (String): Name of the right railing object.

Stairs

  • ДанныеAlign (Enumeration): The alignment of the stairs on the baseline. Only used if a baseline is defined. Can be Left, Right or Center.
  • ДанныеHeight (Length): The total height of the stairs. Only used if no baseline is defined, or if the baseline is horizontal. Ignored if ДанныеRiser Height Enforce is non-zero.
  • ДанныеLength (Length): The total length of the stairs if no baseline is defined. Ignored if ДанныеTread Depth Enforce is non-zero.
  • ДанныеWidth (Length): The width of the stairs.
  • ДанныеWidth of Landing (FloatList): If the ДанныеNumber Of Steps is 1, the stairs object acts as a landing. When this is the case and the baseline is multi-segment, the width of first segment of the landing follows the ДанныеWidth, the widths of subsequent segments follow the list set here.

Steps

  • ДанныеBlondel Ratio (Float): (только для чтения) Рассчитанный коэффициент Блонделя. Это соотношение позволяет определить наиболее удобную для человека лестницу и должно составлять от 62 до 64 см или от 24,5 до 25,5 дюйма.
  • ДанныеLanding Depth (Length): Площадь площадки находящейся по ходу лестницы, если площадка ДанныеLandings добавлена. По умолчанию значение ДанныеWidth равно 0.
  • ДанныеNosing (Length): Размер выступа проступи.
  • ДанныеNumber Of Steps (Integer): Количество ступеней (подступенников).
  • ДанныеRiser Height (Length): (только для чтения) Высота подступенников лестницы. Если высота ступеней ДанныеRiser Height Enforce равна нулю, тогда она вычисляется как (ДанныеHeight / ДанныеNumber of Steps). Иначе это значение то же самое, что и ДанныеRiser Height Enforce.
  • ДанныеRiser Height Enforce (Length): Высота подступенников лестницы.
  • ДанныеRiser Thickness (Length): Толщина подступенников лестницы.
  • ДанныеTread Depth (Length): (только для чтения) The depth of the treads. If ДанныеTread Depth Enforce is 0 it is calculated (ДанныеLength / ДанныеNumber of Steps). Else it is the same as ДанныеTread Depth Enforce.
  • ДанныеTread Depth Enforce (Length): The enforced depth of the treads.
  • ДанныеTread Thickness (Length): The thickness of the treads.

Structure

  • ДанныеConnection Down Start Stairs (Enumeration): The type of connection between the lower floor slab and the start of the stairs. Can be HorizontalCut, VerticalCut or HorizontalVerticalCut.
  • ДанныеConnection End Stairs Up (Enumeration): The type of connection between the end of the stairs and the upper floor slab. Can be toFlightThickness or toSlabThickness.
  • ДанныеDown Slab Thickness (Length): The thickness of the lower floor slab.
  • ДанныеFlight (Enumeration): The direction of the flight after the landing. Can be Straight, HalfTurnLeft or HalfTurnRight.
  • ДанныеLandings (Enumeration): The type of landings. Can be None or At center (At each corner not implemented yet).
  • ДанныеStringer Overlap (Length): The overlap of the stringers above the bottom of the treads.
  • ДанныеStringer Width (Length): The width of the stringers.
  • ДанныеStructure (Enumeration): The structure type of the stairs. Can be None, Massive, One stringer or Two stringers.
  • ДанныеStructure Offset (Length): The offset between the border of the stairs and the structure.
  • ДанныеStructure Thickness (Length): The thickness of the structure.
  • ДанныеUp Slab Thickness (Length): The thickness of the upper floor slab.
  • ДанныеWinders (Enumeration): The type of winders. Not implemented.

Limitations

Ограничения

  • Недоступно до версии 0.14 FreeCAD
  • Only straight stairs are available at the moment
  • See the forum entry for circle stairs.
  • See the forum announcement.

Программирование

See also: Arch API and FreeCAD Scripting Basics.

The Stairs tool can be used in macros and from the Python console by using the following function:

Stairs = makeStairs(baseobj=None, length=None, width=None, height=None, steps=None, name="Stairs")
  • Creates a Stairs object from the given baseobj.
  • If baseobj is not given, it will use length, width, height, and steps, to build a solid object.

Пример:

import Arch

Stairs = Arch.makeStairs(length=5000, width=1200, height=3000, steps=14)