Arch Stairs/ru: Difference between revisions
No edit summary |
(Created page with "==Описание==") |
||
Line 20: | Line 20: | ||
}} |
}} |
||
==Описание== |
|||
==Description== |
|||
<div class="mw-translate-fuzzy"> |
<div class="mw-translate-fuzzy"> |
Revision as of 09:31, 27 August 2022
Лестница |
Системное название |
---|
Arch_Stairs |
Расположение в меню |
Arch → Лестница |
Верстаки |
Arch |
Быстрые клавиши |
S R |
Представлено в версии |
0.14 |
См. также |
Структура, Оборудование |
Описание
Описание
Инструмент лестницы позволяет автоматически создавать несколько типов лестниц. В настоящий момент поддерживаются только прямые лестницы (с или без центральной посадки). Лестница может быть построена с нуля или с прямой line, и в этом случае лестница следует за строкой. Если линия не горизонтальна, а имеет вертикальный наклон, лестница также будет следовать ее наклону.
См. Stairs entry in wikipedia для определения различных терминов, используемых для описания частей лестницы.
Изображение двух сконструированных лестниц, одна с массивной конструкцией и лестничной площадкой, а другая с одним стрингером.
Опции
- Лестницы разделяют общие свойства и поведение всех Arch Components
Применение
- Нажмите кнопку Лестница или нажмите клавиши S, R.
- Настройте нужные свойства. Некоторые части лестницы, такие как конструкция, могут изначально отсутствовать, если какое-либо из свойств делает это невозможным, например, толщина конструкции равна 0.
Свойства
Данные
Segment and Parts
- ДанныеAbs Top (
Vector
): (read-only) The absolute top level the stairs lead to. - ДанныеLast Segment (
Link
): Last segment (flight or landing) of an Arch Stairs connecting to this segment. The start level of the stairs will be the end level of this last segment. - ДанныеOutline Left (
VectorList
): The left outline of the stairs. - ДанныеOutline Left All (
VectorList
): The left outline of all segments of the stairs. - ДанныеOutline Right (
VectorList
): The right outline of the stairs. - ДанныеOutline Right All (
VectorList
): The right outline of all segments of the stairs. - ДанныеRailing Height Left (
Length
): Height of the left railing of the stairs or landing. - ДанныеRailing Height Right (
Length
): Height of the right railing of the stairs or landing. - ДанныеRailing Left (
String
): Name of the left railing object. - ДанныеRailing Offset Left (
Length
): Offset of the left railing from the edge of the stairs or landing. - ДанныеRailing Offset Right (
Length
): Offset of the right railing from the edge of the stairs or landing. - ДанныеRailing Right (
String
): Name of the right railing object.
Stairs (Лестница)
- ДанныеAlign (
Enumeration
): The alignment of the stairs on the baseline. Only used if a baseline is defined. Can beLeft
,Right
orCenter
. - ДанныеHeight (
Length
): The total height of the stairs. Only used if no baseline is defined, or if the baseline is horizontal. Ignored if ДанныеRiser Height Enforce is non-zero. - ДанныеLength (
Length
): The total length of the stairs if no baseline is defined. Ignored if ДанныеTread Depth Enforce is non-zero. - ДанныеWidth (
Length
): The width of the stairs. - ДанныеWidth of Landing (
FloatList
): If the ДанныеNumber Of Steps is 1, the stairs object acts as a landing. When this is the case and the baseline is multi-segment, the width of first segment of the landing follows the ДанныеWidth, the widths of subsequent segments follow the list set here.
Steps (Ступени)
- ДанныеBlondel Ratio (
Float
): (только для чтения) Рассчитанный коэффициент Блонделя. Это соотношение позволяет определить наиболее удобную для человека лестницу и должно составлять от 62 до 64 см или от 24,5 до 25,5 дюйма. - ДанныеLanding Depth (
Length
): Длина лестничной площадки находящейся по ходу лестницы, указывается только если площадка ДанныеLandings добавлена. По умолчанию значение ДанныеWidth равно 0. - ДанныеNosing (
Length
): Размер выступа ступени. - ДанныеNumber Of Steps (
Integer
): Количество ступеней (подступенников). - ДанныеRiser Height (
Length
): (только для чтения) Высота подступенников лестницы. Если высота ступеней ДанныеRiser Height Enforce равна нулю, тогда она вычисляется как (ДанныеHeight / ДанныеNumber of Steps). В других случаях это значение эквивалентно ДанныеRiser Height Enforce. - ДанныеRiser Height Enforce (
Length
): Принудительная высота подступенников лестницы. - ДанныеRiser Thickness (
Length
): Толщина подступенников лестницы. - ДанныеTread Depth (
Length
): (только для чтения) Длина ступеней. Если ДанныеTread Depth Enforce равно 0, то вычисляется как (ДанныеLength / ДанныеNumber of Steps). В других случаях это значение эквивалентно ДанныеTread Depth Enforce. - ДанныеTread Depth Enforce (
Length
): Принудительная длина ступеней - ДанныеTread Thickness (
Length
): Толщина ступеней.
Structure
- ДанныеConnection Down Start Stairs (
Enumeration
): The type of connection between the lower floor slab and the start of the stairs. Can beHorizontalCut
,VerticalCut
orHorizontalVerticalCut
. - ДанныеConnection End Stairs Up (
Enumeration
): The type of connection between the end of the stairs and the upper floor slab. Can betoFlightThickness
ortoSlabThickness
. - ДанныеDown Slab Thickness (
Length
): The thickness of the lower floor slab. - ДанныеFlight (
Enumeration
): The direction of the flight after the landing. Can beStraight
,HalfTurnLeft
orHalfTurnRight
. - ДанныеLandings (
Enumeration
): The type of landings. Can beNone
orAt center
(At each corner
not implemented yet). - ДанныеStringer Overlap (
Length
): The overlap of the stringers above the bottom of the treads. - ДанныеStringer Width (
Length
): The width of the stringers. - ДанныеStructure (
Enumeration
): The structure type of the stairs. Can beNone
,Massive
,One stringer
orTwo stringers
. - ДанныеStructure Offset (
Length
): The offset between the border of the stairs and the structure. - ДанныеStructure Thickness (
Length
): The thickness of the structure. - ДанныеUp Slab Thickness (
Length
): The thickness of the upper floor slab. - ДанныеWinders (
Enumeration
): The type of winders. Not implemented.
Ограничения
- На данный момент доступны только прямые лестницы
- См. тему на форуме про круговые лестницы.
- См. уведомления о данном инструменте на форуме.
Программирование
См. так же: Arch API и Основы составления скриптов в FreeCAD.
The Stairs tool can be used in macros and from the Python console by using the following function:
Stairs = makeStairs(baseobj=None, length=None, width=None, height=None, steps=None, name="Stairs")
- Creates a
Stairs
object from the givenbaseobj
. - If
baseobj
is not given, it will uselength
,width
,height
, andsteps
, to build a solid object.
Пример:
import Arch
Stairs = Arch.makeStairs(length=5000, width=1200, height=3000, steps=14)
- Elements: Wall, Structure, Curtain Wall, Window, Roof, Space, Stairs, Equipment, Frame, Fence, Truss, Profile, Pipe, Pipe Connector
- Reinforcements: Straight Rebar, U-Shape Rebar, L-Shape Rebar, Stirrup, Bent-Shape Rebar, Helical Rebar, Column Reinforcement, Beam Reinforcement, Slab Reinforcement, Footing Reinforcement, Custom Rebar
- Panels: Panel, Panel Cut, Panel Sheet, Nest
- Materials: Material, Multi-Material
- Organization: Building Part, Project, Site, Building, Level, External reference, Section Plane, Schedule
- Axes: Axis, Axes system, Grid
- Modification: Cut with plane, Add component, Remove component, Survey
- Utilities: Component, Clone component, Split Mesh, Mesh to Shape, Select non-manifold meshes, Remove Shape from Arch, Close Holes, Merge Walls, Check, Toggle IFC Brep flag, 3 Views from mesh, Create IFC spreadsheet, Toggle Subcomponents
- Additional: Preferences, Import Export Preferences (IFC, DAE, OBJ, JSON, 3DS, SHP), IfcOpenShell, IfcPlusPlus, Arch API
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework