Sketcher "Структурная копия"
Sketcher Структурная Копия |
Системное название |
---|
Sketcher Carbon Copy |
Расположение в меню |
Эскиз → Геометрия эскиза → Структурная Копия |
Верстаки |
Sketcher |
Быстрые клавиши |
Нет |
Представлено в версии |
0.17 |
См. также |
Нет |
Описание
Инструмент Структурная Копия копирует всю геометрию и ограничения из другого эскиза в активный эскиз. Размерные ограничения, которые существовали до применении функции копирования останутся связанными с размерными ограничениями исходного эскиза через выражения.
Dimensional constraints which exist before the copy function remain linked to the original sketch's dimensional constraints through expressions.
Использование
- Нажмите кнопку Структурная Копия.
- Нажмите на ребро другого эскиза.
- Элементы геометрии, а также ограничения cкопируются в эскиз.
- Если копируемый эскиз не находится на параллельной плоскости к активному эскизу, указатель мыши сменится на знак запрета. Нажмите кнопки CTRL ALT что бы разрешить выбор не параллельного эскиза. После этого объект будет адаптирован к новой плоскости эскиза. (примечание: на момент написания этого документа необходимо сохранить и перезагрузить документ, чтобы сделать его видимым)
- Если копируемый эскиз находится не в активном теле, указатель мыши сменится на знак запрета. Нажмите кнопку CTRL что бы разрешить выбор эскиза из другого тела. Если внешний эскиз также находится в другой плоскости, используйте ː CTRL ALT что бы скопировать из другой плоскости.
- Нажатие ESC или правой кнопки мыши закрывает функцию.
Notes:
- When sketches are used in the PartDesign Workbench, normally the sketch to carbon copy should be in the same PartDesign Body as the currently active sketch. If the sketch to be copied is not in the active Body, the mouse pointer will not allow selection. In this case, hold Ctrl to allow selection of sketches from other Bodies.
- Normally, the sketch to select should be in a plane that is parallel to the currently active sketch. If the sketch to be copied is not parallel to the currently active sketch, hold Ctrl+Alt to allow selection of non-parallel sketches. The object will then be adjusted to the active sketch's plane. Noteː as of this writing this needs a save and reload of the document to make it visible. This works for sketches located outside of the currently active Body as well.
- If the Sketcher mode has been changed to construction mode using Toggle Construction all copied geometry will be created in construction mode.
Ограничения
- Копируется все содержание эскиза; Невозможно выбрать только его часть.
Sketcher
- General: Create sketch, Edit sketch, Attach sketch, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Polyline, Line, Arc, Arc by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Arc slot, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Toggle construction geometry
- Sketcher constraints:
- Dimensional constraints: Dimension, Horizontal distance, Vertical distance, Distance, Auto radius/diameter, Radius, Diameter, Angle, Lock
- Geometric constraints: Coincident (unified), Coincident, Point on object, Horizontal/vertical, Horizontal, Vertical, Parallel, Perpendicular, Tangent or collinear, Equal, Symmetric, Block
- Other constraints: Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Fillet, Chamfer, Trim, Split, Extend, External geometry, Carbon copy, Select origin, Select horizontal axis, Select vertical axis, Array transform, Polar transform, Scale transform, Offset geometry, Symmetry, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher visual: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide circular helper for arcs, Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Show/hide internal geometry, Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework