Sketcher BSplinePoleWeight
Sketcher BSplinePoleWeight |
Menu location |
---|
Sketch → Sketcher visual → Show/hide B-spline information layer → Show/hide B-spline control point weight |
Workbenches |
Sketcher |
Default shortcut |
None |
Introduced in version |
0.19 |
See also |
Sketcher CreateBSpline |
Description
The Sketcher BSplinePoleWeight tool shows or hides the B-spline control point weight in all sketches. See below for an explanation about weights.
The numbers (green, in square brackets) refer to the weights of the control points.
Usage
- There are several ways to invoke the tool:
- Press the Show/hide B-spline control point weight button.
- Select the Sketch → Sketcher visual → Show/hide B-spline information layer → Show/hide B-spline control point weight option from the menu.
Weight explanation
B-splines are basically a combination of Bézier curves (nicely explained in this and this video).
A Bézier curve is calculated using this formula:
Where n is the degree of the curve. So a Bézier curve of degree n is a polygon with order n. The factors are in fact the coordinates of the Bézier curves' control points. For a visualization see this page.
The term weight in FreeCAD is a bit misleading because in literature the factors are often called weights as well. FreeCAD's weights are something different. The idea of these weights is to modify the spline so that the different control points are "weighted". The idea is that a point with weight 2 should have twice as much influence as a point with weight 1. This is achieved by using this different formula to calculate the spline:
Where is the weight for the point .
This is a new class of Bézier curves, the curve is no longer a polynomial but a fractional polynomial. These curves are called rational Bézier curves and the B-splines created from them are called rational B-splines.
The consequence is that you gain more flexibility in defining the spline shape. If all weights are equal, the shape of the spline does not change. So the weights relative to each other is important, not the value alone. For example this spline has exactly the same shape as the one in the first image:
Same B-spline as in first image but with different absolute weight values
A weight of zero would be a singularity in the equation to calculate the rational Bézier curves, therefore FreeCAD assures that it cannot become zero. Nevertheless, small values have the same effect as if the control point would almost not exist:
Same B-spline with an almost zero weight control point
Changing weights
How to change weights is described on this page.
- General: Create sketch, Edit sketch, Attach sketch, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Polyline, Line, Arc, Arc by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Arc slot, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Toggle construction geometry
- Sketcher constraints:
- Dimensional constraints: Dimension, Horizontal distance, Vertical distance, Distance, Auto radius/diameter, Radius, Diameter, Angle, Lock
- Geometric constraints: Coincident (unified), Coincident, Point on object, Horizontal/vertical, Horizontal, Vertical, Parallel, Perpendicular, Tangent or collinear, Equal, Symmetric, Block
- Other constraints: Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Fillet, Chamfer, Trim, Split, Extend, External geometry, Carbon copy, Select origin, Select horizontal axis, Select vertical axis, Array transform, Polar transform, Scale transform, Offset geometry, Symmetry, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher visual: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide circular helper for arcs, Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Show/hide internal geometry, Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub