Команда "Преобразование"

From FreeCAD Documentation
Revision as of 19:29, 10 September 2021 by Evgeniy (talk | contribs) (Created page with "{{GuiCommand/ru |Name/ru=Преобразовать |Name=Std_TransformManip |MenuLocation=В контекстном меню древовидного обзора проек...")

Преобразовать

Системное название
Std_TransformManip
Расположение в меню
В контекстном меню древовидного обзора проекта → Преобразовать

Правка → Преобразовать

Верстаки
Все
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Стандартные команды и инструменты

Описание

This tool allows you to apply rotation increments or translation increments to an object.

File:Manipulators.png

Применение

  1. Right-click on the object in the model tree view. For some objects the tool is also available via double-clicking the object in the model tree.
    • Press and hold the left mouse button on an axis arrow and drag to translate the object in that direction.
    • Press and hold the left mouse button on a sphere and drag to rotate the object in that axis.
    • The Increments parameters in the Task panel allow one to define the movement with precision
  2. The OK button allows you to quit the utility easily.

Примечания

  • As soon as you rotate/move the object in the 3D view, changes are applied.
  • There is no Cancel button. Pressing OK only serves to exit the utility.
  • It's possible to undo changes afterwards.
  • The value boxes are for increments, not absolute values.