Workbenches/tr: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 12: Line 12:
Bir tezgahtan diğerine geçtiğinizde, arayüzde mevcut olan araçlar değişir. Araç çubukları, komut çubukları ve arayüzün muhtemelen diğer kısımları yeni tezgahlara geçer, ancak sahnenizin içeriği değişmez. Örneğin, Taslak Tezgahı ile 2D şekiller çizmeye başlayabilir, daha sonra Parça Tezgahı ile nesne üzerinde daha fazla çalışabilirsiniz.
Bir tezgahtan diğerine geçtiğinizde, arayüzde mevcut olan araçlar değişir. Araç çubukları, komut çubukları ve arayüzün muhtemelen diğer kısımları yeni tezgahlara geçer, ancak sahnenizin içeriği değişmez. Örneğin, Taslak Tezgahı ile 2D şekiller çizmeye başlayabilir, daha sonra Parça Tezgahı ile nesne üzerinde daha fazla çalışabilirsiniz.


<div class="mw-translate-fuzzy">
Bazen bir Tezgahın ''Modül'' olarak adlandırıldığını unutmayın . Ancak, Tezgahlar ve Modüller farklı varlıklardır. Bir Modül, FreeCAD'in bir uzantısıdır, Tezgah ise bazı araç çubuklarını ve menüleri gruplayan özel bir GUI yapılandırmasıdır. Genellikle her modül kendi tezgahını içerir, bu nedenle ismin çapraz kullanımıdır.
Bazen bir Tezgahın ''Modül'' olarak adlandırıldığını unutmayın . Ancak, Tezgahlar ve Modüller farklı varlıklardır. Bir Modül, FreeCAD'in bir uzantısıdır, Tezgah ise bazı araç çubuklarını ve menüleri gruplayan özel bir GUI yapılandırmasıdır. Genellikle her modül kendi tezgahını içerir, bu nedenle ismin çapraz kullanımıdır.
</div>


==Yerleşik tezgahlar==
==Yerleşik tezgahlar==


<div class="mw-translate-fuzzy">
Aşağıdaki tezgahlar bütün FreeCAD kurulumlarında bulunur:
Aşağıdaki tezgahlar bütün FreeCAD kurulumlarında bulunur:
</div>


<!--Please keep this list consistent with Online_Help_Toc and User_hub-->
* [[File:Freecad.svg|32px]] [[Std_Base|Std Base]]. This is not really a workbench, but rather a category of 'standard' commands and tools that can be used in all workbenches.
* [[Image:Freecad.svg|32px]] [[Std_Base|Std Base]]. This is not really a workbench, but rather a category of 'standard' commands and tools that can be used in all workbenches.


* [[Image:Workbench_Arch.svg|32px]] The [[Arch_Workbench|Arch Workbench]] for working with architectural elements.
<div class="mw-translate-fuzzy">
* [[Image:Workbench_Arch.svg|24px]] [[Arch Module|Mimari tezgah]] Mimari tasarımlar yapmak için
* <s>[[Image:Workbench_Complete.svg|24px]] The [[Complete_Workbench|Complete Workbench]] hold all commands and features from all the modules and workbenches which met certain quality criteria.</s> '''<small>Deprecated in v0.17</small>'''
* [[Image:Workbench_Draft.svg|24px]] [[Draft Module|Taslak tezgahı]] 2D araçları ve temel 2D ve 3D CAD işlemleri içerir.
* [[Image:Workbench_Drawing.svg|24px]] [[Drawing Module|Çizim tezgahı]] 2D sayfa üzerinde 3D çalışmaları görüntülemek için.
* [[Image:Workbench_FEM.svg|24px]] [[FEM Module|FEM tezgahı]] Sonlu Eleman Analizleri (FEA) iş akışını sağlar.
</div>


* [[Image:Workbench_Draft.svg|32px]] The [[Draft_Workbench|Draft Workbench]] contains 2D tools and basic 2D and 3D CAD operations.
<div class="mw-translate-fuzzy">
* [[Image:Workbench_Image.svg|24px]] [[Image Module|Görüntü Tezgahı]] Bitmap görüntüleri ile çalışmak için.
* [[Image:Workbench_Inspection.svg|24px]] [[Inspection Workbench|Kontrol tezgahı]] şekillerin incelenmesi için size özel araçlar vermek için yapılır. Hala gelişme aşamasında.
* [[Image:Workbench_Mesh.svg|24px]] [[Mesh Module|Kafes tezgahı]] üçgen kafesleri ile çalışmak için.
* [[Image:Workbench_OpenSCAD.svg|24px]] [[OpenSCAD Module|OpenSCAD tezgahı]] OpenSCAD ile birlikte çalışma ve Yapısal Katı Geometri (CSG) modeli geçmişini tamiri için.
* [[Image:Workbench_Part.svg|24px]] [[Part Module|Parça tezgahı]] CAD parçaları ile çalışmak için.
</div>


* [[Image:Workbench_FEM.svg|32px]] The [[FEM_Workbench|FEM Workbench]] provides Finite Element Analysis (FEA) workflow.
<div class="mw-translate-fuzzy">
* [[Image:Workbench_PartDesign.svg|24px]] [[PartDesign Workbench|Parça tasarım tezgahı]] taslaklardan parça şekilleri oluşturmak için.
* [[Image:Workbench_Path.svg|24px]] [[Path_Workbench|CNC G-Kod tezgahı]] G-Kod talimatları üretmek için kullanılır. Hala gelişme aşamasındadır.
* [[Image:Workbench_Plot.svg|24px]] [[Plot Module|Parsel tezgahı]] diğer modülleri ve araçları oluşturulan çıktı araziler düzenlemek ve kaydetmek için kullanılır.
* [[Image:Workbench_Points.svg|24px]] [[Points_Module|Nokta tezgahı]] noktalar ile çalışmak için.
* [[Image:Workbench_Raytracing.svg|24px]] [[Raytracing Module|Raytracing tezgahı]] ışın-izleme ile çalışmak için (render)
</div>


* [[Image:Workbench_Image.svg|32px]] The [[Image_Workbench|Image Workbench]] for working with bitmap images.
<div class="mw-translate-fuzzy">
* [[Image:Workbench_Reverse_Engineering.svg|24px]] [[Reverse Engineering Workbench|Ters mühendislik tezgahı]] şekilleri/katıları/kafesleri FreeCAD uyumlu parametrik özelliklere dönüştürmek için özel araçlar sağlamayı amaçlamaktadır. (geliştiriliyor)
* [[Image:Workbench_Robot.svg|24px]] [[Robot_Workbench|Robot tezgahı]] robot hareketleri incelemek için.
* [[Image:Workbench_Ship.svg|24px]] [[Ship Workbench|Gemi tezgahı]] FreeCAD-Gemi, sağlanan geometri üzerine oluşturulmalıdır. Gemi üzerinde çalışır.
* [[Image:Workbench_Sketcher.svg|24px]] [[Sketcher Module|Eskiz tezgahı]] Ölçülü geometrik çizimler ile çalışmak için.
* [[Image:Workbench_Spreadsheet.svg|24px]] [[Spreadsheet Module|Hesap tablo tezgahı]] tablo veri oluşturmak ve işlemek için.
</div>


* [[Image:Workbench_Inspection.svg|32px]] The [[Inspection_Workbench|Inspection Workbench]] is made to give you specific tools for examination of shapes. It is still under development.
<div class="mw-translate-fuzzy">

* [[Image:Workbench_Start.svg|24px]] [[Start_Workbench|Başlangıç tezgahı]] hızlı bir şekilde kullanılacak tezgâha geçiş için kullanılır.
* [[Image:Workbench_Mesh.svg|32px]] The [[Mesh_Workbench|Mesh Workbench]] for working with triangulated meshes.
* [[Image: Workbench_Surface.svg | 24px]] [[Surface_Module/tr | Yüzey Tezgahı]], yüzeyleri oluşturmak ve değiştirmek için araçlar sağlar.Parça tezgahındaki kenarlardan yüzey oluşturucu ile benzerdir.

* [[Image:Workbench_TechDraw.svg|24px]] [[TechDraw Module|Teknik resim tezgahı]],[[Drawing Module|Çizim tezgahının]] daha gelişmiş ve daha zengin özelliklere sahip halefi.
* [[Image:Workbench_OpenSCAD.svg|32px]] The [[OpenSCAD_Workbench|OpenSCAD Workbench]] for interoperability with OpenSCAD and repairing [[constructive solid geometry|constructive solid geometry]] (CSG) model history.
* [[Image:Workbench_Test.svg|24px]] [[Debugging|Test tezgahı]] FreeCAD'de hata ayıklamak için.

* [[Image:Workbench_Web.svg|24px]][[Web Workbench|Web tezgahı]] FreeCAD içinde 3D-View kısmında bir tarayıcı penceresi sağlar.
* [[Image:Workbench_Part.svg|32px]] The [[Part_Workbench|Part Workbench]] for working with CAD parts.
</div>

* [[Image:Workbench_PartDesign.svg|32px]] The [[PartDesign_Workbench|Part Design Workbench]] for building Part shapes from sketches.

* [[Image:Workbench_Path.svg|32px]] The [[Path_Workbench|Path Workbench]] is used to produce G-Code instructions. It is still under development.

* [[Image:Workbench_Points.svg|32px]] The [[Points_Workbench|Points Workbench]] for working with point clouds.

* [[Image:Workbench_Raytracing.svg|32px]] The [[Raytracing_Workbench|Raytracing Workbench]] for working with ray-tracing (rendering).

* [[Image:Workbench_Reverse_Engineering.svg|32px]] The [[Reverse_Engineering_Workbench|Reverse Engineering Workbench]] is intended to provide specific tools to convert shapes/solids/meshes into parametric FreeCAD-compatible features. It is still under development.

* [[Image:Workbench_Robot.svg|32px]] The [[Robot_Workbench|Robot Workbench]] for studying robot movements.

* [[Image:Workbench_Sketcher.svg|32px]] The [[Sketcher_Workbench|Sketcher Workbench]] for working with geometry-constrained sketches.

* [[Image:Workbench_Spreadsheet.svg|32px]] The [[Spreadsheet_Workbench|Spreadsheet Workbench]] for creating and manipulating spreadsheet data.

* [[Image:Workbench_Start.svg|32px]] The [[Start_Workbench|Start Center Workbench]] allows you to quickly jump to one of the most common workbenches.

* [[Image:Workbench_Surface.svg|32px]] The [[Surface_Workbench|Surface Workbench]] provides tools to create and modify surfaces. It is similar as the Part Shape builder Face from edges.

* [[Image:Workbench_TechDraw.svg|32px]] The [[TechDraw_Workbench|TechDraw Workbench]] for producing technical drawings from 3D models. It is the successor of the [[Drawing_Workbench|Drawing Workbench]].

* [[Image:Workbench_Test.svg|32px]] The [[Testing|Test Framework Workbench]] is for debugging FreeCAD.

* [[Image:Workbench_Web.svg|32px]] The [[Web_Workbench|Web Workbench]] provides you with a browser window instead of the [[3D view|3D view]] within FreeCAD.


=== Deprecated ===
=== Deprecated ===


The following workbenches are still included in the base installation for compatibility purposes, but they should no longer be used.
The following workbenches are still included in the base installation for compatibility purposes, but they should no longer be used.

* [[Image:Workbench_Complete.svg|32px]] The [[Complete_Workbench|Complete Workbench]] holds all commands and features from all the modules and workbenches which met certain quality criteria. {{Obsolete|0.17}}
* [[Image:Workbench_Complete.svg|32px]] The [[Complete_Workbench|Complete Workbench]] holds all commands and features from all workbenches that met certain quality criteria. {{Obsolete|0.17}}
* [[Image:Workbench_Drawing.svg|32px]] The [[Drawing Module|Drawing Workbench]] was used for displaying your 3D work on a 2D sheet but has now been deprecated, it is still needed to read old FreeCAD files that contain a Drawing object originally made with this workbench. See [[TechDraw Module|TechDraw Workbench]], which is a more advanced replacement. {{Obsolete|0.17}}

* [[Image:Workbench_Drawing.svg|32px]] The [[Drawing_Workbench|Drawing Workbench]] was used for producing technical drawings but has now been deprecated. It is still needed to read old FreeCAD files that contain objects created with this workbench. The [[TechDraw_Workbench|TechDraw Workbench]] is its more advanced replacement. {{Obsolete|0.17}}


==Program dışı tezgahlar==
==Program dışı tezgahlar==

Revision as of 19:57, 16 August 2021

FreeCAD, Revit veya CATIA gibi birçok modern tasarım uygulamasına benzer olarak, Tezgah kavramına dayanmaktadır. Bir tezgah, belirli bir görev için özel olarak gruplandırılmış bir takım araçlar olarak düşünülebilir. Geleneksel bir mobilya atölyesinde, ahşapla çalışan için bir çalışma masası, metal parçalarıyla çalışan için başka bir çalışma masası ve montaj yapan kişi için üçüncü bir çalışma masası olacaktır.

FreeCAD, like many modern design applications such as Revit or CATIA, is based on the concept of Workbench. A workbench can be considered as a set of tools specially grouped for a certain task. In a traditional furniture workshop, you would have a work table for the person who works with wood, another one for the one who works with metal pieces, and maybe a third one for the guy who mounts all the pieces together.

FreeCAD'de de aynı görüş geçerlidir. Araçlar, ilgili oldukları görevlere göre tezgahlarda gruplanır.

Bir tezgahtan diğerine geçtiğinizde, arayüzde mevcut olan araçlar değişir. Araç çubukları, komut çubukları ve arayüzün muhtemelen diğer kısımları yeni tezgahlara geçer, ancak sahnenizin içeriği değişmez. Örneğin, Taslak Tezgahı ile 2D şekiller çizmeye başlayabilir, daha sonra Parça Tezgahı ile nesne üzerinde daha fazla çalışabilirsiniz.

Bazen bir Tezgahın Modül olarak adlandırıldığını unutmayın . Ancak, Tezgahlar ve Modüller farklı varlıklardır. Bir Modül, FreeCAD'in bir uzantısıdır, Tezgah ise bazı araç çubuklarını ve menüleri gruplayan özel bir GUI yapılandırmasıdır. Genellikle her modül kendi tezgahını içerir, bu nedenle ismin çapraz kullanımıdır.

Yerleşik tezgahlar

Aşağıdaki tezgahlar bütün FreeCAD kurulumlarında bulunur:

  • Std Base. This is not really a workbench, but rather a category of 'standard' commands and tools that can be used in all workbenches.
  • The FEM Workbench provides Finite Element Analysis (FEA) workflow.
  • The Inspection Workbench is made to give you specific tools for examination of shapes. It is still under development.
  • The Path Workbench is used to produce G-Code instructions. It is still under development.
  • The Reverse Engineering Workbench is intended to provide specific tools to convert shapes/solids/meshes into parametric FreeCAD-compatible features. It is still under development.
  • The Surface Workbench provides tools to create and modify surfaces. It is similar as the Part Shape builder Face from edges.

Deprecated

The following workbenches are still included in the base installation for compatibility purposes, but they should no longer be used.

Program dışı tezgahlar

FreeCAD çalışma tezgahlarının Python'da programlanması kolaydır , bu nedenle FreeCAD ana geliştiricilerinin dışında ek çalışma tezgahları geliştiren birçok insan vardır.

3. Parti tezgahlar sayfasında, bu tezgahlardan bir kısmı hakkında bilgi bulabilir ve kılavuzlarına ulaşabilirsiniz. Ayrıca FreeCAD Eklentileri projesi bu çalışmaları FreeCAD içinden kolayca yüklenebilir hale getirmeyi amaçlamaktadır.

Yeni tezgahlar geliştiriliyor, bizi izlemeye devam edin!