TechDraw HoleShaftFit/de: Difference between revisions

From FreeCAD Documentation
(Created page with "Das 24px '''TechDraw HoleShaftFit''' Werkzeug fügt Bohrungs- oder Wellentoleranzen nach ISO 286 an lineare Maße oder Durchmessermaße an.")
(Created page with "{{Caption|Links das Auswahlfenster, rechts einige Toleranzen}}")
Line 27: Line 27:


[[Image:TechDraw_HoleShaftFitExample.png|500px]]
[[Image:TechDraw_HoleShaftFitExample.png|500px]]
{{Caption|Links das Auswahlfenster, rechts einige Toleranzen}}
<div lang="en" dir="ltr" class="mw-content-ltr">
{{Caption|On the left the task panel, on the right some added tolerances}}
</div>


<span id="Usage"></span>
<span id="Usage"></span>

Revision as of 13:20, 14 April 2023

Other languages:

TechDraw HoleShaftFit

Menu location
TechDraw → Add hole or shaft fit
Workbenches
TechDraw
Default shortcut
None
Introduced in version
-
See also
TechDraw Geometric dimensioning and tolerancing

Beschreibung

Das TechDraw HoleShaftFit Werkzeug fügt Bohrungs- oder Wellentoleranzen nach ISO 286 an lineare Maße oder Durchmessermaße an.

Links das Auswahlfenster, rechts einige Toleranzen

Anwendung

  1. Select a single linear dimension (length, horizontal or vertical) or a single diameter dimension.
  2. Press the Add hole or shaft fit button.
  3. A task panel opens.
  4. Specify shaft fit or hole fit as applicable.
  5. Select the desired ISO 286 fit option from the combo box. The corresponding field and the fit type (loose fit, snug fit or press fit) are updated.
  6. Press the OK button.
  7. The selected option and the calculated tolerance values are added to the dimension.