Sketcher "Переключение виртуального пространства"

From FreeCAD Documentation
Revision as of 17:18, 18 October 2020 by Baritone (talk | contribs) (Created page with "{{GuiCommand/ru |Name=Sketcher SwitchVirtualSpace |Name/ru=Переключение виртуального пространства |MenuLocation=Sketch → Виртуаль...")

Переключение виртуального пространства

Системное название
Sketcher SwitchVirtualSpace
Расположение в меню
Sketch → Виртуальное пространство эскиза → Переключение виртуального пространства
Верстаки
Sketcher
Быстрые клавиши
Нет
Представлено в версии
0.17
См. также
Нет

Description

The FreeCAD Sketcher has two virtual spaces on which constraints can be set. Usually all constraints gets set on virtual space one. You can move some constraints to virtual space two. This can help to inspect only on a few constraints at a time.

Usage

To move constraints to the other virtual space:

  1. Select constraints you want to move.
  2. Press the Switch virtual space button.

To switch the virtual space:

  1. Make sure you have no constraint selected.
  2. Press the Switch virtual space button.

Note: if you decide to set constraints on the second virtual space, don't forget about them later on if you don't see them in the 3D view.