Sketcher Прямоугольный массив

From FreeCAD Documentation
Revision as of 12:06, 23 June 2022 by Hnkmaxim (talk | contribs) (Created page with "==Опции==")

Прямоугольный массив

Системное название
Sketcher_RectangularArray
Расположение в меню
Sketch → Инструменты для эскиза → Прямоугольный массив
Верстаки
Sketcher
Быстрые клавиши
Нет
Представлено в версии
0.16
См. также
Нет

Описание

Создаёт массив выбранных элементов эскиза.

Применение

  1. Select sketcher elements in task panel or in 3D view.
  2. There are several ways to invoke the command:
    • Press the Rectangular array button.
    • Select the Sketch → Sketcher tools → Rectangular array option from the menu.
  3. Specify the options for the array in the dialog that opens.
  4. Press the OK button.
  5. Move the mouse in the 3D view towards the desired reference point.
    By keeping Ctrl pressed, the angle to the reference point can be fixed in steps of 5°. introduced in version 0.20
  6. Left-click in the 3D view to create the array.
  7. To set the distances between the array elements, edit the dimensional constraints of the array.

Опции

Rectangular array has the following options:

  • Colums: The number of columns for the array.
  • Rows: The number of rows for the array.
  • Equal vertical/horizontal spacing: If the vertical distance between the array elements should be the same as the vertical distance.
  • Constrain inter-element separation: When this is checked, the distance between the array elements will be constrained.
    If you for example only know that you need a 23 x 15 mm array, use this option the be later able to change these constraints to the dimensions you need.
  • Clone: ??