Ponto

From FreeCAD Documentation
Revision as of 10:40, 10 November 2021 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Sketcher Point

Veja também
Sketch → Sketcher geometries → Create point
Bancadas de trabalho
Sketcher
Atalho padrão
Nenhum
Introduzido na versão
-
Veja também
Nenhum

Description

The Point tool creates a point in the current sketch, which can be used for constructing geometry elements. The point is always an construction element and does not show up in the 3D-view.

Point in the sketcher

Usage

  • Click on the button Create point, to activate the function.
  • Clicking in the sketch creates a point.
  • Pressing Esc or clicking the right mouse button cancels the function.

Options

  • By default points are created as construction geometry and therefore not visible outside of Sketch editing mode. Use the Toggle Construction tool to change them to normal geometry.
  • A mode to snap to the grid can be set in the Sketcher Preferences. The point snaps then to the grid, if it has less than 25% grid distance to a grid line. The snap mode does not fix them to the grid. The points can be moved with the mouse or constraints to other locations.