Sketcher ConstrainDistanceX/ru: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
No edit summary
Line 9: Line 9:
}}
}}


<div class="mw-translate-fuzzy">
{{GuiCommand/ru
{{GuiCommand/ru
|Name=Sketcher ConstrainDistanceX
|Name=Constraint HorizontalDistance
|Name/ru=Constraint HorizontalDistance
|Name/ru=Sketcher ConstrainDistanceX
|Workbenches=[[Sketcher Workbench/ru|Sketcher]], [[PartDesign Workbench/ru|PartDesign]]
|MenuLocation=Sketch → Ограничения эскиза → Ограничения расстояния по горизонтали
|MenuLocation=Sketch → Ограничения эскиза → Ограничения расстояния по горизонтали
|Workbenches=[[Sketcher_Workbench/ru|Sketcher]]
|SeeAlso=[[Constraint Length/ru|Ограничения расстояния]], [[Constraint VerticalDistance/ru|Ограничения расстояния по вертикали]]
|SeeAlso=[[Sketcher_ConstrainDistance/ru|Sketcher Constrain Length]], [[Sketcher_ConstrainDistanceY/ru|Sketcher Constrain Vertical Distance]]
}}
}}
</div>


==Description==
==Description==

Revision as of 08:44, 16 December 2020

Sketcher ConstrainDistanceX

Системное название
Sketcher ConstrainDistanceX
Расположение в меню
Sketch → Ограничения эскиза → Ограничения расстояния по горизонтали
Верстаки
Sketcher
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Sketcher Constrain Length, Sketcher Constrain Vertical Distance

Description

Fixes the horizontal distance between 2 points or line ends. If only one point is selected, the distance is set to the sketch origin.

Usage

  1. Pick one or two points or one line.
  2. Invoke the tool several ways:
    • Press the Constrain horizontal distance button in the toolbar.
    • Use the Shift + H keyboard shortcut. (H is for Horizontal)
    • Use the Sketch → Sketcher constraints → Constrain horizontal distance from the top menu.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection, but will require selection of two points or one line. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or Esc once to quit the command.