Sketcher "Клонировать"

From FreeCAD Documentation
Revision as of 18:10, 13 September 2021 by Evgeniy (talk | contribs) (Created page with "{{Docnav/ru |Симметрия |Копировать |Верстак "Sketcher" |IconL=Sketcher_Symmet...")

Sketcher Клонировать

Системное название
Sketcher Clone
Расположение в меню
Sketch → Инструменты для эскиза → Клонировать
Верстаки
Sketcher
Быстрые клавиши
Нет
Представлено в версии
0.16
См. также
Sketcher Copy, Sketcher Move

Description

Clones the selected sketch elements from one point to another, using the last selected point as reference. If any constraints are part of the source elements, then the new constraints are linked to the source constraints; if the constraints in the source are changed, the constraints in the clone are also changed. To avoid this linking see Sketcher Copy.

Note that a clone of a clone becomes a Sketcher Copy. If you wish to create linked constraints, clone the original source elements again.

Usage

  1. Select the sketch elements to clone.
  2. Click on Sketcher Clone or choose Sketch → Sketcher tools → Clone from the top menu.
  3. Place clone in the 3D view.

No extra constraints for clone-behaviour are added.