Part Cylinder/cs: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 31: Line 31:
== Properties ==
== Properties ==


* {{PropertyData|Angle:}} This is the rotation angle that permits the creation of a portion of cylinder (it is set to 360° by default)
* {{PropertyData|Angle}}: This is the rotation angle that permits the creation of a portion of cylinder (it is set to 360° by default)
* {{PropertyData|Height:}} The height is the distance in the z-axis
* {{PropertyData|Height}}: The height is the distance in the z-axis
* {{PropertyData|Radius:}} The radius defines a plane in x-y.
* {{PropertyData|Radius}}: The radius defines a plane in x-y.
* {{PropertyData|First Angle}}: angle in first direction. {{Version|0.20}}
* {{PropertyData|First Angle}}: Angle in first direction. {{Version|0.20}}
* {{PropertyData|Second Angle}}: angle in second direction. {{Version|0.20}}
* {{PropertyData|Second Angle}}: Angle in second direction. {{Version|0.20}}


{{Docnav
{{Docnav

Revision as of 11:53, 14 May 2021

Díl Válec

Umístění Menu
Díl -> Válec
Pracovní stoly
Modul Díl, Kompletace
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Díl Vytváření zakl.geom.tvarů

Description

Creates a simple parametric cylinder, with position, angle, radius and height parameters.

Usage

  1. Switch to the Part Workbench
  2. There are several ways to invoke the command:
    • Press the Cylinder button in the toolbar.
    • Select Part → Primitives → Cylinder entry from the top menu

Result: The default result is a full cylinder with a radius of 2 mm and height of 10 mm, centered along the global z-axis and attached to the global xy-plane.

The cylinder properties can later be edited, either in the Property editor or by double-clicking the cylinder in the Tree view.

válec vytvořený nástrojem Válec

Properties

  • ÚdajeAngle: This is the rotation angle that permits the creation of a portion of cylinder (it is set to 360° by default)
  • ÚdajeHeight: The height is the distance in the z-axis
  • ÚdajeRadius: The radius defines a plane in x-y.
  • ÚdajeFirst Angle: Angle in first direction. introduced in version 0.20
  • ÚdajeSecond Angle: Angle in second direction. introduced in version 0.20