Part Cone: Difference between revisions

From FreeCAD Documentation
m (Moved image description down in to a caption)
mNo edit summary
Line 2: Line 2:
<translate>
<translate>
<!--T:12-->
<!--T:12-->
{{Docnav
{{Docnav|[[Part_Box|Box]]|[[Part_Cylinder|Cylinder]]|[[Part_Module|Part]]|IconL=Part_Box.png|IconC=Workbench_Part.svg|IconR=Part_Cylinder.png}}
|[[Part_Box|Box]]
|[[Part_Cylinder|Cylinder]]
|[[Part_Module|Part]]
|IconL=Part_Box.png
|IconC=Workbench_Part.svg
|IconR=Part_Cylinder.png
}}


<!--T:1-->
<!--T:1-->
{{GuiCommand
{{GuiCommand|Name=Part Cone|MenuLocation=Part → Cone||Workbenches=[[Part_Module|Part]]|SeeAlso=[[Part_CreatePrimitives|Part CreatePrimitives]]}}
|Name=Part Cone
|MenuLocation=Part → Cone
|Workbenches=[[Part_Module|Part]]
|SeeAlso=[[Part_CreatePrimitives|Part CreatePrimitives]]
}}


== Description == <!--T:7-->
== Description == <!--T:7-->
Line 12: Line 24:
== Usage == <!--T:8-->
== Usage == <!--T:8-->
# Open the {{Button|[[Image:Workbench_Part.svg|16px]] [[Part Workbench|Part]]}} Workbench.
# Open the {{Button|[[Image:Workbench_Part.svg|16px]] [[Part Workbench|Part]]}} Workbench.
# Press the {{Button|[[Image:Part Cone.png|24px]]}} button, or use the {{MenuCommand|Part → Cone}} from the top menu.
# Press the {{Button|[[Image:Part Cone.svg|24px]]}} button, or use the {{MenuCommand|Part → Cone}} from the top menu.


<!--T:9-->
<!--T:9-->
'''Result:''' The default values create a truncated parametric cone, defined by radius1, radius2 height and angle parameters. The default cone will be positioned at origin (point 0,0,0) on creation. The angle parameter permits the creation of a portion of cone (it is set to 360° by default), and the radius 1 and 2 correspond to base and top radius of the truncated cone.
'''Result:''' The default values create a truncated parametric cone, defined by {{incode|Radius1}}, {{incode|Radius2}}, {{incode|Height}}, and {{incode|Angle}} parameters. The default cone will be positioned at origin (point 0,0,0) on creation. The angle parameter permits the creation of a portion of cone (it is set to 360° by default), and the radius 1 and 2 correspond to base and top radius of the truncated cone.


== Options == <!--T:10-->
== Options == <!--T:10-->
Line 22: Line 34:
|
|
{{KEY|Cone}}
{{KEY|Cone}}
*Radius 1 - radius of the arc or circle defining the lower face
* '''Radius 1:''' radius of the arc or circle defining the lower face
*Radius 2 - radius of the arc or circle defining the upper face
* '''Radius 2:''' radius of the arc or circle defining the upper face
*Height - the height of the Part Cone
* '''Height:''' the height of the Part Cone
*Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.
* '''Angle:''' the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.
|}
|}


Line 33: Line 45:
<!--T:5-->
<!--T:5-->
{{Caption|Above: shows a Part Cone with the parameter "Angle" set to 270 degrees and all other parameters are at their default values.}}
{{Caption|Above: shows a Part Cone with the parameter "Angle" set to 270 degrees and all other parameters are at their default values.}}

==Scripting==


<!--T:13-->
<!--T:13-->
{{Docnav
{{Docnav|[[Part_Box|Box]]|[[Part_Cylinder|Cylinder]]|[[Part_Module|Part]]|IconL=Part_Box.png|IconC=Workbench_Part.svg|IconR=Part_Cylinder.png}}
|[[Part_Box|Box]]
|[[Part_Cylinder|Cylinder]]
|[[Part_Module|Part]]
|IconL=Part_Box.png
|IconC=Workbench_Part.svg
|IconR=Part_Cylinder.png
}}


<!--T:14-->
<!--T:14-->

Revision as of 15:28, 7 February 2020

Part Cone

Menu location
Part → Cone
Workbenches
Part
Default shortcut
None
Introduced in version
-
See also
Part CreatePrimitives

Description

A parametric truncated Part Cone primitive is available in the Part workbench from the Part tool bar, Part menu (primitives sub-menu) and the Create Primitives dialogue.

Usage

  1. Open the Part Workbench.
  2. Press the button, or use the Part → Cone from the top menu.

Result: The default values create a truncated parametric cone, defined by Radius1, Radius2, Height, and Angle parameters. The default cone will be positioned at origin (point 0,0,0) on creation. The angle parameter permits the creation of a portion of cone (it is set to 360° by default), and the radius 1 and 2 correspond to base and top radius of the truncated cone.

Options

Cone

  • Radius 1: radius of the arc or circle defining the lower face
  • Radius 2: radius of the arc or circle defining the upper face
  • Height: the height of the Part Cone
  • Angle: the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.

Above: shows a Part Cone with the parameter "Angle" set to 270 degrees and all other parameters are at their default values.

Scripting