Vermessung von Winkeln an Bohrungen

From FreeCAD Documentation
Revision as of 11:07, 28 April 2020 by AnHi (talk | contribs) (Created page with "1. Mittellinie der Bohrung erstellen:")
Tutorial
Topic
TechDraw
Level
Base
Time to complete
1 minute
Authors
AnHi
FreeCAD version
0.19
Example files
None
See also
None

Einleitung

Dieses Tutorial erklärt, wie man mit TechDraw Workbench Winkel an z.B. schrägen Bohrungen bemaßen kann.

Beim Bemaßen von Bohrungswinkeln kann man die vertikalen und horizontalen Mittellinien, die man in den Eigenschaften der Ansicht mit "False/True" einstellen kann, nicht nutzen. Man benötigt Hilfslinien bzw. -punkte.

Ausführung

1. Mittellinie der Bohrung erstellen:

There are some possibilities to create a center line for holes. At first the lines or points on the hole must be selected as shown below. Second, the following tools can be used from the toolbar to create the center line:

Add Centerline between 2 Points
Add Centerline between 2 Lines


Above: created with which creates centerlines between 2 points

Above: created with which creates centerlines between 2 lines

In the dialog box choice "Ausgerichtet / Aligned" for achses out of main achses. "Erweitert um / Extend by" means the length of the center line beyond of the body line in the drawing. With "Shift Horiz." and "Shift Vert." the center line can move in horizontal or vertical direction, if is necessary. "Stil" means the figure of center line.
















Above: dialog box

The created center line can change. Select the center line and press the button or from the tool bar which you have created the center line. Delete the center line only with from the tool bar after selecting the center line.

2. Setting angles:

Quadrant points select with from the tool bar. Next select the points as show below and use from the tool bar to create the angle. Other succession create other angles. Is there no catching point on the center line change "ISO count" in the properties.







Above: Succession of selection

Template:Tutorials navi/de