FEM Поперечное сечение балки

From FreeCAD Documentation
Revision as of 13:10, 12 February 2024 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

FEM ElementGeometry1D

Системное название
FEM ElementGeometry1D
Расположение в меню
Model → Beam cross section
Верстаки
FEM
Быстрые клавиши
C B
Представлено в версии
-
См. также
FEM tutorial

Описание

Команда Поперечное сечение балки используется для определения поперечных сечений элементов балки. В настоящее время доступны следующие типы поперечных сечений: прямоугольное, круглое и трубное.

Применение

  1. There are several ways to invoke the command:
    • Press the Beam cross section button.
    • Select the Model → Element Geometry → Beam cross section option from the menu.
  2. Choose the type of cross section and specify the necessary dimensions:
    • Rectangular: width and height,
    • Circular: diameter,
    • Pipe: outer diameter and thickness.
  3. Optionally, press the Add button in the task panel and then click on the edge you want to have a prescribed cross section. If the edge selection is free, all remaining edges (whose cross section is not defined by other FEM ElementGeometry1D objects) will be automatically assigned.

Свойства

  • ДанныеSection Type: specifies the type of the beam section (Rectangular, Circular or Pipe)
  • ДанныеCirc Diameter: diameter of circular section, used if ДанныеSection Type is Circular
  • ДанныеPipe Diameter: outer diameter of pipe section, used if ДанныеSection Type is Pipe
  • ДанныеPipe Thickness: thickness of pipe section, used if ДанныеSection Type is Pipe
  • ДанныеRect Height: height of rectangular section, used if ДанныеSection Type is Rectangular
  • ДанныеRect Width: width of rectangular section, used if ДанныеSection Type is Rectangular

Ограничения

  • Other types of cross-sections available in CalculiX (elliptical, box and general) are not currently supported. One can edit the input file to use them.

Примечания