FEM StartbedingungStrömungsgeschwindigkeit

From FreeCAD Documentation
Revision as of 13:51, 1 October 2022 by FBXL5 (talk | contribs)

FEM RandbedingungInitialeFließgeschwindigkeit

Menüeintrag
Modell → Strömungs-Randbedingungen → Randbedingung initiale Fließgeschwindigkeit
Arbeitsbereich
FEM
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
FEM RandbedingungFließgeschwindigkeit

Beschreibung

Erstellt eine Startbedingung einer Fließgeschwindigkeit für die Strömungsanalyse einer Flüssigkeit.

Anwendung

  1. Es gibt mehrere Möglichkeiten den Befehl aufzurufen:
  2. Den Startwert der Fließgeschwindigkeit für die Analyse eingeben.
  3. Der Wert wird als Kombination der 3 kartesischen Hauptvektorkomponenten (X,Y,Z) angegeben.

Limitations

  • The constraint applies the initial flow velocity to all nodes in the FEA model.
  • The constraint cannot be oriented other then using the main cartesian components.

Hinweise

In the most simple analyses, it is not necessary to specify the initial flow velocity, however it is recommended as best practice.