FEM StartbedingungStrömungsgeschwindigkeit

From FreeCAD Documentation
Revision as of 18:20, 27 September 2022 by FBXL5 (talk | contribs) (Created page with "{{Docnav/de |RandbedingungElectrostatischesPotential |RandbedingungFließgeschwindigkeit |FEM_W...")

FEM RandbedingungStartfließgeschwindigkeit

Menüeintrag
Modell → Strömungs-Randbedingungen → Randbedingung anfängliche Fließgeschwindigkeit
Arbeitsbereich
FEM
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
FEM RandbedingungFließgeschwindigkeit

Beschreibung

Erstellt eine Startbedingung einer Fließgeschwindigkeit für die Strömungsanalyse einer Flüssigkeit.

Anwendung

  1. There are several ways to invoke the command:
  2. Enter an initial flow velocity value for the analysis.
  3. The value is entered as a combination of the 3 main cartesian vectors components (X,Y,Z).

Limitations

  • The constraint applies the initial flow velocity to all nodes in the FEA model.
  • The constraint cannot be oriented other then using the main cartesian components.

Hinweise

In the most simple analyses, it is not necessary to specify the initial flow velocity, however it is recommended as best practice.