Draft: Aggancia Perpendicolare

From FreeCAD Documentation
Revision as of 14:07, 26 April 2019 by Renatorivo (talk | contribs)

Perpendicolare

Posizione nel menu
Draft → Aggancio → Perpendicolare
Ambiente
Draft, Arch
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Agganciare, Aggancia

Descrizione

File:Draft Snap Perpendicular.png

Snapping the second point of a line to an invisible extension of another line, so that the first one is perpendicular to the second one

How to use

  1. Make sure File:Snap Lock.svg Draft ToggleSnap and File:Snap Perpendicular.svg Snap Perpendicular are turned on.
  2. Choose Draft Line to draw a shape. Enter the first point.
  3. Move the cursor over a line segment or edge of another object to select the point of perpendicularity.
  4. The edge will be highlighted in yellow, and a small white circle will indicate the point on the edge, or on its extension, to which your point will be attached.
  5. Click to attach your new point.