Draft Arc/cs: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand|Name=Draft_Arc|Workbenches=Kreslení, Architektura|MenuLocation=Draft -> Arc|Shortcut=A R|SeeAlso=[[Draft Circle|Kreslení kružn...")
(Updating to match new version of source page)
 
(41 intermediate revisions by 5 users not shown)
Line 1: Line 1:
<languages/>
{{GuiCommand|Name=Draft_Arc|Workbenches=[[Draft Module|Kreslení]], [[Arch Module|Architektura]]|MenuLocation=Draft -> Arc|Shortcut=A R|SeeAlso=[[Draft Circle|Kreslení kružnice]]}}


{{Docnav
==Description==
|[[Draft_Fillet|Fillet]]
The Arc tool creates an arc in the current [[Draft Workingplane|work plane]] by entering four points, the center, the radius, the first point and the last point, or by picking tangents, or any combination of those. It takes the [[Draft Linestyle|linewidth and color]] previously set on the Tasks tab. This tool works the same way as the [[Draft Circle]] tool, but adds start and end angles.
|[[Draft_Arc_3Points|Arc 3Points]]
|[[Draft_Workbench|Draft]]
|IconL=Draft_Fillet.svg
|IconR=Draft_Arc_3Points.svg
|IconC=Workbench_Draft.svg
}}


<div class="mw-translate-fuzzy">
[[Image:Draft_Arc_example.jpg|400px]]
{{GuiCommand/cs|Name=Draft_Arc|Name/cs=Kreslení oblouk|Workbenches=[[Draft_Workbench/cs|Kreslení]], [[Arch_Workbench/cs|Architektura]]|MenuLocation=Kreslení → Oblouk|Shortcut=A R|SeeAlso=[[Draft Circle/cs|Kreslení kružnice]]}}
</div>


<span id="Description"></span>
==How to use==
<div class="mw-translate-fuzzy">
# Press the {{KEY|[[Image:Draft Arc.png|16px]] [[Draft Arc]]}} button, or press {{KEY|A}} then {{KEY|R}} keys
==Popis==
# Click a first point on the 3D view, or type a [[Draft_Coordinates|coordinate]]
Nástroj Oblouk vytváří oblouk v aktuální [[Draft SelectPlane/cs|pracovní rovině]] zadáním čtyř bodů: střed, poloměr, počáteční a koncový bod nebo zadáním tečen nebo kombinací obou způsobů. Použije se [[Draft Linestyle/cs|tloušťka čáry a barva]] předem zadaná v záložce Nástrojů. Tento nástroj pracuje stejně jako nástroj [[Draft Circle/cs|Kružnice]], ale přidává počáteční a koncový úhel.
# Click a second point on the 3D view, or enter a radius value
</div>
# Click a third point in the 3D view, or enter a start angle

# Click a fourth point in the 3D View, or enter an end ange
The [[Image:Draft_Arc.svg|24px]] '''Draft Arc''' command creates a circular arc on the current [[Draft_SelectPlane|working plane]] from a center, a radius, a start angle and an aperture angle. The radius and the angles can be defined by picking points.

A Draft Arc is in fact a [[Draft_Circle|Draft Circle]] with a {{PropertyData|First Angle}} that is not the same as its {{PropertyData|Last Angle}}.

[[Image:Draft_Arc_example.jpg|400px]]
{{Caption|Arc defined by four points, center, radius, initial point of arc and final point of arc}}

==Usage==

See also: [[Draft_Tray|Draft Tray]], [[Draft_Snap|Draft Snap]] and [[Draft_Constrain|Draft Constrain]].

<div class="mw-translate-fuzzy">
==Použití==
# Stiskněte tlačítko {{KEY|[[Image:Draft Arc.png|16px]] [[Draft Arc|Oblouk]]}} nebo stiskněte klávesy {{KEY|A}} a potom {{KEY|R}}
# Klikněte na první bod ve 3D pohledu nebo zadejte souřadnice
# Klikněte na druhý bod ve 3D pohledu nebo zadejte poloměr
# Klikněte na třetí bod ve 3D pohledu nebo zadejte počáteční úhel
# Klikněte na čtvrtý bod ve 3D pohledu nebo zadejte koncový úhel
</div>


==Options==
==Options==

* The primary use of the arc tool is by picking four points: the centre, a point on the circumference, defining the radius, a third point defining the start of the arc, and a fourth one defining its end.
The single character keyboard shortcuts available in the task panel can be changed. See [[Draft_Preferences|Draft Preferences]]. The shortcuts mentioned here are the default shortcuts (for version 0.22).
* By pressing {{KEY|ALT}}, you can select a tangent instead of picking point, to define the base circle of the arc. You can therefore construct several types of circles by selecting one, two or three tangents.

* The direction of the arc depends on the movement you are doing with your mouse. If you start to move clockwise after the third point is entered, your arc will go clockwise. To go counter-clockwise, simply move your mouse back over the third point, until the arc starts drawing in the other direction.
<div class="mw-translate-fuzzy">
* To enter coordinates manually, simply enter the numbers, then press {{KEY|ENTER}} between each X, Y and Z component.
==Volby==
* Press {{KEY|T}} or click the checkbox to check/uncheck the {{KEY|'''Continue'''}} button. If continue mode is on, the Arc tool will restart after you give the fourth point, allowing you to draw another arc without pressing the Arc button again.
* Základní použití nástroje Oblouk je zadání čtyř bodů: střed, bod na obvodu, který definuje poloměr, třetí bod definující začátek oblouku a čtvrtý bod definující jeho konec.
* Press {{KEY|CTRL}} while drawing to force [[Draft_Snap|snapping]] your point to the nearest snap location, independently of the distance.
* Stisknutím {{KEY|ALT}} můžete vybrat tečnu místo zadávání bodu čímž definujete základní kružnici oblouku. Tím můžete zkonstruovat několik typů kružnic výběrem jedné, dvou nebo tří tečen.
* Press {{KEY|SHIFT}} while drawing to [[Draft_Constrain|constrain]] your point horizontally or vertically in relation to the center.
* Směr oblouku závisí na pohybu myši. Jestli s ní po zadání třetího bodu začnete pohybovat ve směru hodinových ručiček, Váš oblouk bude vytvořen ve stejném směru. Chcete-li oblouk v opačném směru, jednoduše se myší vracejte přes třetí bod proti směru hodinových ručiček tak dlouho až se oblouk začne kreslit v opačném směru.
* Press {{KEY|ESC}} or the {{KEY|'''Cancel'''}} button to abort the current Line command.
* Chcete-li zadat souřadnice ručně jednoduše zadejte číslo a potom stiskněte {{KEY|ENTER}} mezi každou z komponent X, Y a Z.
* The arc can be turned into a circle after creation, by setting a same value to its first angle and last angle properties.
* Stiskněte klávesu {{KEY|T}} nebo klikněte na zaklikávací políčko pro zatrhnutí nebo odtrhnutí tlačítka {{KEY|'''Pokračovat'''}}. Je-li nastaven pokračovací mód, bude nástroj Oblouk hned po zadání čtvrtého bodu připraven ke kreslení dalšího oblouku bez nutnosti stisknout znovu tlačítko Oblouk..
* Stisknutím klávesy {{KEY|CTRL}} během kreslení vynutíte [[Draft_Snap|přichycení]] vašeho bodu k nejbližšímu uchopovacímu místu nezávisle na vzálenosti od něho.
* Stisknutím klávesy {{KEY|SHIFT}} během kreslení [[Draft_Constrain|nastavíte vazbu]] vašeho bodu svisle nebo vodorovně v relaci ke středu.
* Stisknutím tlačítka {{KEY|ESC}} nebo {{KEY|'''Cancel'''}} zrušíte právě probíhající příkaz.
* Oblouk může být po vytvoření změněn na kružnici nastavením stejné hodnoty pro počáteční i koncový úhel ve vlastnostech.
</div>

==Notes==

* A Draft Arc can be edited with the [[Draft_Edit|Draft Edit]] command.

==Preferences==

See also: [[Preferences_Editor|Preferences Editor]] and [[Draft_Preferences|Draft Preferences]].

* If the {{MenuCommand|Edit → Preferences... → Draft → General → Create Part primitives if possible}} option is checked, the command will create a [[Part_Circle|Part Circle]] instead of a Draft Circle.


==Properties==
==Properties==

* {{PropertyData|Radius}}: The radius of the arc
<div class="mw-translate-fuzzy">
* {{PropertyData|First Angle}}: The angle of the first point of the arc
==Vlastnosti==
* {{PropertyData|Last Angle}}: The angle of the last point of the arc
* {{PropertyData|Poloměr}}: Poloměr oblouku
* {{PropertyData|Počáteční úhel}}: Úhel počátečního bodu oblouku
* {{PropertyData|Koncový úhel}}: Úhel koncového bodu oblouku
</div>


==Scripting==
==Scripting==

The Circle tool can also be used to create arcs in [[macros]] and from the python console by using the following function, giving it additional arguments:
<div class="mw-translate-fuzzy">
<syntaxhighlight>
==Skriptování==
'''makeCircle (radius, [placement], [facemode], [startangle], [endangle])'''
Nástroj Kružnice může být použít i pro vytváření oblouků v [[macros|makrech]] a z konzoly Pythonu použitím následující funkce, přidáním dodatečných argumentů:
</syntaxhighlight>
</div>
* Creates a circle object with given radius.

* If a placement is given, it is used. If facemode is False, the circle is shown as a wireframe, otherwise as a face.
To create a Draft Arc use the {{incode|make_circle}} method ({{Version|0.19}}) of the Draft module. This method replaces the deprecated {{incode|makeCircle}} method.
* If startangle AND endangle are given (in degrees), they are used and the object appears as an arc.
* Returns the newly created object.


Example:
Example:
<syntaxhighlight>
import Draft
myArc = Draft.makeCircle(2,startangle=0,endangle=90)


{{Code|code=
</syntaxhighlight>
import FreeCAD as App
{{clear}}
import Draft
<languages/>

doc = App.newDocument()

arc1 = Draft.make_circle(200, startangle=0, endangle=90)
arc2 = Draft.make_circle(500, startangle=20, endangle=160)
arc3 = Draft.make_circle(750, startangle=-30, endangle=-150)

doc.recompute()
}}


{{Docnav
|[[Draft_Fillet|Fillet]]
|[[Draft_Arc_3Points|Arc 3Points]]
|[[Draft_Workbench|Draft]]
|IconL=Draft_Fillet.svg
|IconR=Draft_Arc_3Points.svg
|IconC=Workbench_Draft.svg
}}

{{Draft Tools navi{{#translation:}}}}
{{Userdocnavi{{#translation:}}}}

Latest revision as of 10:04, 30 January 2024

Kreslení oblouk

Umístění Menu
Kreslení → Oblouk
Pracovní stoly
Kreslení, Architektura
Výchozí zástupce
A R
Představen ve verzi
-
Viz také
Kreslení kružnice

Popis

Nástroj Oblouk vytváří oblouk v aktuální pracovní rovině zadáním čtyř bodů: střed, poloměr, počáteční a koncový bod nebo zadáním tečen nebo kombinací obou způsobů. Použije se tloušťka čáry a barva předem zadaná v záložce Nástrojů. Tento nástroj pracuje stejně jako nástroj Kružnice, ale přidává počáteční a koncový úhel.

The Draft Arc command creates a circular arc on the current working plane from a center, a radius, a start angle and an aperture angle. The radius and the angles can be defined by picking points.

A Draft Arc is in fact a Draft Circle with a ÚdajeFirst Angle that is not the same as its ÚdajeLast Angle.

Arc defined by four points, center, radius, initial point of arc and final point of arc

Usage

See also: Draft Tray, Draft Snap and Draft Constrain.

Použití

  1. Stiskněte tlačítko Oblouk nebo stiskněte klávesy A a potom R
  2. Klikněte na první bod ve 3D pohledu nebo zadejte souřadnice
  3. Klikněte na druhý bod ve 3D pohledu nebo zadejte poloměr
  4. Klikněte na třetí bod ve 3D pohledu nebo zadejte počáteční úhel
  5. Klikněte na čtvrtý bod ve 3D pohledu nebo zadejte koncový úhel

Options

The single character keyboard shortcuts available in the task panel can be changed. See Draft Preferences. The shortcuts mentioned here are the default shortcuts (for version 0.22).

Volby

  • Základní použití nástroje Oblouk je zadání čtyř bodů: střed, bod na obvodu, který definuje poloměr, třetí bod definující začátek oblouku a čtvrtý bod definující jeho konec.
  • Stisknutím ALT můžete vybrat tečnu místo zadávání bodu čímž definujete základní kružnici oblouku. Tím můžete zkonstruovat několik typů kružnic výběrem jedné, dvou nebo tří tečen.
  • Směr oblouku závisí na pohybu myši. Jestli s ní po zadání třetího bodu začnete pohybovat ve směru hodinových ručiček, Váš oblouk bude vytvořen ve stejném směru. Chcete-li oblouk v opačném směru, jednoduše se myší vracejte přes třetí bod proti směru hodinových ručiček tak dlouho až se oblouk začne kreslit v opačném směru.
  • Chcete-li zadat souřadnice ručně jednoduše zadejte číslo a potom stiskněte ENTER mezi každou z komponent X, Y a Z.
  • Stiskněte klávesu T nebo klikněte na zaklikávací políčko pro zatrhnutí nebo odtrhnutí tlačítka Pokračovat. Je-li nastaven pokračovací mód, bude nástroj Oblouk hned po zadání čtvrtého bodu připraven ke kreslení dalšího oblouku bez nutnosti stisknout znovu tlačítko Oblouk..
  • Stisknutím klávesy CTRL během kreslení vynutíte přichycení vašeho bodu k nejbližšímu uchopovacímu místu nezávisle na vzálenosti od něho.
  • Stisknutím klávesy SHIFT během kreslení nastavíte vazbu vašeho bodu svisle nebo vodorovně v relaci ke středu.
  • Stisknutím tlačítka ESC nebo Cancel zrušíte právě probíhající příkaz.
  • Oblouk může být po vytvoření změněn na kružnici nastavením stejné hodnoty pro počáteční i koncový úhel ve vlastnostech.

Notes

  • A Draft Arc can be edited with the Draft Edit command.

Preferences

See also: Preferences Editor and Draft Preferences.

  • If the Edit → Preferences... → Draft → General → Create Part primitives if possible option is checked, the command will create a Part Circle instead of a Draft Circle.

Properties

Vlastnosti

  • ÚdajePoloměr: Poloměr oblouku
  • ÚdajePočáteční úhel: Úhel počátečního bodu oblouku
  • ÚdajeKoncový úhel: Úhel koncového bodu oblouku

Scripting

Skriptování

Nástroj Kružnice může být použít i pro vytváření oblouků v makrech a z konzoly Pythonu použitím následující funkce, přidáním dodatečných argumentů:

To create a Draft Arc use the make_circle method (introduced in version 0.19) of the Draft module. This method replaces the deprecated makeCircle method.

Example:

import FreeCAD as App
import Draft

doc = App.newDocument()

arc1 = Draft.make_circle(200, startangle=0, endangle=90)
arc2 = Draft.make_circle(500, startangle=20, endangle=160)
arc3 = Draft.make_circle(750, startangle=-30, endangle=-150)

doc.recompute()