Curves Parameterkamm
Curves Parameterkamm |
Menüeintrag |
---|
Curves → Comb plot |
Arbeitsbereich |
Curves |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
- |
Siehe auch |
Keiner |
Description
The Curves ParametricComb can help to visualize the regularity or smoothness of a curve as well as the continuity between two curves. Note: A comb is only for visualization.
A 3D comb will be created for 3D curves. Sample and scale can be changed. This tool is part of the external workbench called Curves.
Above: shows the before (left) and after (right) application of the ParametricComb AKA Comb plot tool
Usage
- Switch to the Curves workbench (install from Addon Manager is necessary, if not previously installed)
- Select an object in the tree view (sketch, wire...) or one or several edges in the 3D view (use CTRL key)
- To invoke the command, do one of the following:
- A comb is created, showing the curvature of the selection.
Notes
- This tool functions as a visual aid.
Limitations
Properties
Scripting
Curves
- Curves IsoCurve, Curves JoinCurve, Curves ParametricComb, Curves ParametricSolid, .................
Anwenderdokumentation
- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzlicher Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Programmeinstellungen, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, Hilf FreeCAD, Spende
- Hilfe: Tutorien, Video Tutorien
- Arbeitsbereiche: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework