CAM Gravieren

From FreeCAD Documentation
Revision as of 11:29, 20 May 2021 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.

Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).

Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.

Path Engrave

Menu location
Path → Engrave
Workbenches
Path
Default shortcut
None
Introduced in version
-
See also
None

Description

The Path Engrave tool is primarily for engraving a Draft ShapeString onto a part. However, it may be useful for other kinds of 2D.

Usage

Empty

Options

Empty

Properties

Data

Base

  • DatenPlacement: -
  • DatenLabel: - User name of the object (UTF-8)

Depth

  • DatenClearance Height: The height needed to clear clamps and obstructions
  • DatenFinal Depth: Final Depth of Tool- lowest value in Z
  • DatenSafe Height: The above which Rapid motions are allowed.
  • DatenStart Depth: Starting Depth of Tool- first cut depth in Z
  • DatenStep Down: Incremental Step Down of Tool

Path

  • DatenActive: - Make False, to prevent operation from generating code
  • DatenBase: - The base geometry for this operation
  • DatenComment: - An optional comment for this operation
  • DatenCoolant Mode: - Coolant mode for this operation
  • DatenCycle Time: - Estimated cycle time for this operation
  • DatenStart Vertex: - The vertex index to start the path from
  • DatenTool Controller: - The tool controller that will be used to calculate the path
  • DatenUser Label: - User assigned label

Hidden

  • DatenBase Object: -
  • DatenBase Shapes: -
  • DatenExpression Engine: -
  • DatenLabel2: -
  • DatenPath: -
  • DatenProxy: -
  • DatenVisibility: -

View

Empty

Scripting

See also: FreeCAD Scripting Basics.

Example:

#Place code example here.

Template:Path Tools navi/de