Funzione Part
Introduzione
Un oggetto Part Feature, (Funzione Part) o formalmente un Part::Feature
, è un elemento semplice a cui è associato una forma topologica che può essere visualizzato nella Vista 3D.
La Part Feature è la classe genitore della maggior parte degli oggetti 2D (Draft, Sketcher) e 3D (Part, PartDesign), ad eccezione delle mesh, che normalmente si basano su Mesh Feature, o su FEM FemMeshObject per gli oggetti FEM.
Diagramma semplificato delle relazioni tra gli oggetti principali in FreeCAD
Utilizzo
Part Feature è un oggetto interno, quindi non può essere creato dall'interfaccia grafica, ma solo dalla console Python come descritto nel paragrafo Script.
L'oggetto Part::Feature
è definito in Part ma può essere usato come classe base per script di oggetti in tutti gli ambienti che producono forme geometriche 2D e 3D. Sostanzialmente tutti gli oggetti prodotti in Part sono istanze di una Part::Feature
.
Part::Feature
è anche la classe genitrice dei Corpi di PartDesign, delle PartDesign Features, e dei Part Part2DObject, che è specializzato per le forme 2D (planari).
Gli ambienti possono aggiungere altre proprietà a questo elemento di base per produrre un oggetto con un comportamento complesso.
Proprietà
Vedere Proprietà per tutti i tipi di proprietà che possono avere oggetti con script.
La Part Feature (classe Part::Feature
) è derivata dalla base App GeoFeature (classeApp::GeoFeature
) ed eredita tutte le sue proprietà. Ha anche diverse proprietà aggiuntive. In particolare una proprietà DatiShape, che memorizza la Part TopoShape dell'oggetto. Questa è la geometria mostrata nella Vista 3D. Altre proprietà di questo oggetto sono quelle legate all'aspetto del suo TopoShape.
Queste sono le proprietà disponibili nell'editor delle proprietà. Le proprietà nascoste possono essere mostrate usando il comando Mostra tutto nel menu contestuale dell 'editor delle proprietà.
Dati
Base
- DatiPlacement: la posizione dell'oggetto nella Vista 3D. Il posizionamento è definito da un punto
Base
(vettore) e unaRotation
(asse e angolo). Vedere Posizionamento.- DatiAngle: l'angolo di rotazione attorno al DatiAxis. Di default, è
0°
(zero gradi). - DatiAxis: il vettore unitario che definisce l'asse di rotazione per il posizionamento. Ogni componente ha un valore in virgola mobile compreso tra
0
e1
. Se un valore è superiore a1
, il vettore viene normalizzato in modo che l'entità del vettore sia1
. Di default, è l'asse Z positivo,(0, 0, 1)
- DatiPosition: un vettore con le coordinate 3D del punto base. Di default, è l'origine
(0, 0, 0)
- DatiAngle: l'angolo di rotazione attorno al DatiAxis. Di default, è
- DatiLabel (
String
): il nome modificabile dall'utente di questo oggetto, è una stringa UTF8 arbitraria.
Vista
La maggior parte degli oggetti in FreeCAD ha quello che viene chiamato un "fornitore di viste", che è una classe che definisce l'aspetto visivo dell'oggetto nella vista 3D e nella vista ad albero. Il fornitore di viste predefinito degli oggetti Part Feature definisce le seguenti proprietà. Anche gli oggetti con script derivati da Part Feature hanno accesso a queste proprietà.
Base
- Vista (hidden)Proxy (
PythonObject
): a custom viewprovider class associated with this object. This only exists for the Python version. See Scripting.
Base
- VistaBounding Box (
Bool
): if it istrue
, the object will show the bounding box in the 3D view. - VistaDisplay Mode (
Enumeration
):Flat Lines
(regular visualization),Shaded
(no edges),Wireframe
(no faces),Points
(only vertices). - VistaShow In Tree (
Bool
): it defaults totrue
, in which case the object will appear in the Tree view; otherwise, the object will be hidden in the tree view. Once an object in the tree is invisible, you can see it again by opening the context menu over the name of the document (right-click), and selecting Show hidden items. Then the hidden item can be chosen and VistaShow In Tree can be switched back totrue
. - VistaVisibility (
Bool
): if it istrue
, the object appears in the 3D view; otherwise it is invisible. By default this property can be toggled on and off by pressing the Space bar.
Object style
- VistaAngular Deflection: accompagna VistaDeviation. È un altro modo per specificare la precisione con cui generare la mesh per il rendering sullo schermo o durante l'esportazione. Il valore predefinito è 28,5 gradi o 0,5 radianti. Minore è il valore, più uniforme sarà l'aspetto nella vista 3D e più fine sarà la mesh che verrà esportata.
- VistaBounding Box: se è
true
, l'oggetto mostra il parallelepipedo che lo contiene nella vista 3D. - VistaDeviation: accompagna VistaAngular Deflection. È un altro modo per specificare la precisione con cui generare la mesh per il rendering sullo schermo o durante l'esportazione. Il valore predefinito è 28,5 gradi o 0,5 radianti. Minore è il valore, più uniforme sarà l'aspetto nella vista 3D e più fine sarà la mesh che verrà esportata.
- VistaDisplay Mode: Flat lines (visualizzazione normale con facce piene), Ombreggiato (bordi leggeri), Wireframe (solo reticolo e facce vuote), Punti (solo vertici).
- VistaDraw Style: Solid, Dashed, Dotted, Dashdot; definisce lo stile dei bordi nella vista 3D.
- VistaLighting: Two side, One side; l'illuminazione proviene da due lati o un lato nella vista 3D.
- VistaLine Color: una tupla di tre valori
(r,g,b)
per definire il colore dei bordi nella vista 3D. - VistaLine Width: un flottante che determina la larghezza in pixel dei bordi nella vista 3D.
- VistaOn Top When Selected: Disabled, Enabled, Object, Element.
- VistaPoint Color: una tupla di tre valori
(r,g,b)
per definire il colore dei vertici nella vista 3D. - VistaPoint Size: un flottante che determina la dimensione in pixel dei vertici nella vista 3D.
- VistaSelectable: se è
true
, l'oggetto può essere selezionato con il puntatore nella vista 3D. Altrimenti, l'oggetto non può essere selezionato fino a quando questa opzione non è impostata sutrue
. - VistaSelection Style: Shape, BoundBox.
- VistaShape Color: una tupla di tre valori
(r,g,b)
per definire il colore delle facce nella vista 3D. - VistaShow In Tree: se è
true
, l'oggetto appare nella vista ad albero. Altrimenti, è impostato come invisibile. - VistaTransparency: un valore da 0 a 100 che determina il livello di trasparenza delle facce nella vista 3D. Un valore di 100 indica facce completamente invisibili; le facce che sono invisibili possono comunque essere selezionate se VistaSelectable è
true
. - VistaVisibility: se è
true
, l'oggetto appare nella vista 3D; altrimenti non è visibile. Per impostazione predefinita, questa proprietà può essere attivata e disattivata premendo la barra Spazio sulla tastiera.
- VistaPoint Color (
Color
): similar to VistaLine Color, defines the color of the vertices. - Vista (hidden)Point Color Array (
ColorList
): it is a list of RGB tuples defining colors, similar to VistaPoint Color. It defaults to a list of one[(0.09, 0.09, 0.09)]
. - Vista (hidden)Point Material (
Material
): an App Material associated with the vertices in this object. By default it is empty. - VistaPoint Size (
FloatConstraint
): similar to VistaLine Width, defines the size of the vertices.
- VistaShape Color (
Color
): similar to VistaLine Color, defines the color of the faces. It defaults to(0.8, 0.8, 0.8)
, which is displayed as[204, 204, 204]
on base 255, a light gray. - Vista (hidden)Shape Material (
Material
): an App Material associated with this object. By default it is empty. - VistaTransparency (
Percent
): an integer from0
to100
(a percentage) that determines the level of transparency of the faces in the 3D view. A value of100
indicates completely invisible faces; the faces are invisible but they can still be picked as long as VistaSelectable istrue
.
Selection
- VistaOn Top When Selected (
Enumeration
): it controls the way in which the selection occurs in the 3D view if the object has a Shape, and there are many objects partially covered by others. It defaults toDisabled
, meaning that no special highlighting will occur;Enabled
means that the object will appear on top of any other object when selected;Object
means that the object will appear on top only if the entire object is selected in the Tree view;Element
means that the object will appear on top only if a subelement (vertex, edge, face) is selected in the 3D view. - VistaSelectable (
Bool
): if it istrue
, the object can be picked with the pointer in the 3D view. Otherwise, the object cannot be selected until this option is set totrue
. - VistaSelection Style (
Enumeration
): it controls the way the object is highlighted. If it isShape
, the entire shape (vertices, edges, and faces) will be highlighted in the 3D view; if it isBoundBox
a bounding box will appear surrounding the object and will be highlighted.
Angular deflection and deviation
Angular Deflection and deviation parameters; d < linear deflection, α < angular deflection.
La deviazione è un valore in percentuale correlato alle dimensioni in millimetri del parallelepipedo contenitore dell'oggetto. La deviazione in millimetri può essere calcolata come segue:
deviation_in_mm = (w + h + d)/3 * deviation/100
dove w
, h
, d
sono le dimensioni del contenitore.
Script
Vedere anche: Script di base per FreeCAD, e script di oggetti.
Un oggetto Part Feature viene creato con il metodo addObject()
del documento.
import FreeCAD as App
doc = App.newDocument()
obj = App.ActiveDocument.addObject("Part::Feature", "Name")
obj.Label = "Custom label"
For Python subclassing, you should create a Part::FeaturePython
object.
import FreeCAD as App
doc = App.newDocument()
obj = App.ActiveDocument.addObject("Part::FeaturePython", "Name")
obj.Label = "Custom label"
Name
See also: Object name for more information on the properties of the Name
.
The addObject
method has two basic string arguments.
- Il primo argomento indica il tipo di oggetto, in questo caso,
"Part::Feature"
. - Il secondo argomento è una stringa che definisce l'attributo
Name
. Se non viene fornito, per impostazione predefinita è"Part__Feature"
.- Il
Name
viene stabilito al momento della creazione; non può essere modificato in seguito. - Il
Name
può includere solo caratteri alfanumerici semplici e il trattino basso,[_0-9a-zA-Z]
. Se vengono forniti altri simboli, questi verranno convertiti in caratteri di sottolineatura; per esempio,"A+B:C*"
viene convertito in"A_B_C_"
. - Il
Name
deve essere unico in tutto il documento. Se vengono creati più oggetti con lo stesso nome, viene aggiunto un numero sequenziale per distinguerli, ad esempio,"Name001"
,"Name002"
, etc.
- Il
- Se lo si desidera, l'attributo
Label
può essere modificato in un testo più significativo.- Di default,
Label
è uguale aName
. - A differenza di
Name
,Label
può accettare qualsiasi stringa UTF8, inclusi accenti e spazi. Poiché la vista ad albero visualizzaLabel
, è buona norma cambiareLabel
in una stringa più descrittiva. - Di default,
Label
deve essere univoco. Questo comportamento può essere modificato nell'editor delle preferenze, Modifica → Preferenze → Generale → Documento → Consenti la duplicazione delle etichette nel documento.
- Di default,
Label
If desired, the Label
attribute can be changed to a more meaningful text.
- The
Label
can accept any UTF8 string, including accents and spaces. Since the Tree view displays theLabel
, it is a good practice to change theLabel
to a more descriptive string. - By default the
Label
is unique, just like theName
. However, this behavior can be changed in the preferences editor, Edit → Preferences → General → Document → Allow duplicate object labels in one document. This means that in general theLabel
may be repeated in the same document; when testing for a specific element the user should rely on theName
rather than on theLabel
.
- Cuore: App DocumentObject
- Base: App FeaturePython, App GeoFeature, Part Feature, Mesh Feature, Fem FemMeshObject
- Forme interne: Part TopoShape, Mesh MeshObject, Fem FemMesh
- Struttura: App DocumentObjectGroup (Std Group), App Part (Std Part), App Link
- Derivate: Part Part2DObject, Sketcher SketchObject, PartDesign Body, PartDesign Feature
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub