Výkres
Draft Drawing |
Umístění Menu |
---|
Drafting → Drawing |
Pracovní stoly |
Kreslení, Architektura |
Výchozí zástupce |
Nikdo |
Představen ve verzi |
- |
Viz také |
Nikdo |
Popis
Tento nástroj umožňuje umístit vybrané objekty na svg Výkresy. Jestliže v dokumentu není žádná šablona, bude použita defaultní.
This tool works similarly to the Drawing View tool but is optimized for Draft Workbench objects, and can render 2D objects with a face filling. It can handle specific objects such as Draft Dimension and Draft Text, that the Drawing View tool cannot handle.
Draft object and dimensions imported into a Drawing page
Použití
- Vyberte objekty, které chcete umístit na výkres
- Stiskněte tlačítko Výkres
Notes:
- The tool will work best with 2D objects from the Draft Workbench or Sketcher Workbench.
- The selected object can also be an Arch SectionPlane, which will show the elements viewed by that plane.
- If there is no existing page, a new one will be created.
- If no page was selected but there is at least one in the document, the first page found will be used to put the projections.
- If you select a sheet and the objects already projected on that sheet, the projections will be updated.
Volby
- Vyberete objekt, který chcete umístit na výkres. Nástroj bude nejlépe pracovat s plochými 2D objekty z modulů Kreslení nebo Skicář.
- Je-li vybraný objekt Architektura Rovina řezu, vytvoří tento nástroj další pohled této roviny řezu.
- Ve stejném výběru přidejte objekt stránky, na který chcete vybraný objekt vykreslit. Jestliže stránka neexistuje, bude nově vytvořena. Jestliže jste stránku nevybrali, ale alespoň jedna už v dokumentu je, bude první nalezená použita pro vykreslení.
- Jestliže jste vybrali existující stránku a objekty, které už ve stránce jsou (např. objekt "Obdélník" již zde je jako objekt "PohledObdélník"), budou nahrazeny. To Vám umožňuje jednoduše vybrat všechny objekty a poslat je na existující stránku, čímž budou na stránce aktualizovány i již dříve vložené objekty.
Vlastnosti
- ÚdajeFill Style: Pro uzavřené tvary umožňuje specifikovat jeden z defaultních stylů pro zaplňování výkresů nebo použití barev tvaru.
- ÚdajeFont Size: Umožňuje specifikovat velikost fontu pro texty a kóty.
- ÚdajeLine Width: Umožňuje specifikovat tloušťku čar zobrazených objektů.
Skriptování
Nástroj Výkres může být použit v makrech a z konzoly Pythonu použitím následující funkce:
DrawingView = makeDrawingView(obj, page, lwmod=None, tmod=None, otherProjection=None)
- Přidá pohled daného objektu na danou stránku.
- Vrací vytvořený objekt pohledu.
The attributes of the view usually need to be modified so that it is displayed correctly in the drawing page. In particular, the position is controlled by X
and Y
, which are given in millimeters, and Scale
is important to correctly fit the projected shape in the page. The scale usually ranges from 1 to 0.25 (1:1 to 1:4) for small solids, and from 0.02 to 0.01 (1:50 to 1:100) for typical architectural elements.
Příklad:
import FreeCAD, Draft, Drawing
obj = Draft.makePolygon(5, 1000)
page = FreeCAD.ActiveDocument.addObject('Drawing::FeaturePage', 'Page')
page.Template = FreeCAD.getResourceDir() + 'Mod/Drawing/Templates/A3_Landscape.svg'
View = Draft.makeDrawingView(obj, page)
View.Scale = 0.02
FreeCAD.ActiveDocument.recompute()
View.X = 200
View.Y = 150
FreeCAD.ActiveDocument.recompute()
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub