CAM Array/de
CAM Array |
Menu location |
---|
CAM → Path Modification → Array |
Workbenches |
CAM |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Beschreibung
The tool Array creates a new path by duplicating another path several times at a certain interval distance.
Anwendung
- Select the operation you want to repeat
- Press the Array button
- Press Apply
- Adjust the desired properties at the data box
Eigenschaften
- DatenType: The type array (polar, linear one ore two directions)
- DatenOffset: The spacing between the array copies for each direction
- DatenCopies: The number of copies (not counting the original) for each direction
Skripten
Siehe auch: FreeCAD Grundlagen Skripten.
Beispiel:
#Place code example here.
CAM
- Project Commands: Job, Post Process, Check the CAM job for common errors, Export Template
- Tool Commands: Inspect CAM Commands, CAM Simulator, Finish Selecting Loop, Toggle the Active State of the Operation, ToolBit Library editor, ToolBit Dock
- Basic Operations: Profile, Pocket Shape, Drilling, Face, Helix, Adaptive, Slot, Engrave, Deburr, Vcarve
- 3D Operations: 3D Pocket, 3D Surface, Waterline
- CAM Modification: Copy the operation in the job, Array, Simple Copy
- Specialty Operations: Thread Milling
- Miscellaneous: Area, Area workplane
- ToolBit architecture: Tools, ToolShape, ToolBit, ToolBit Library, ToolController
- Additional: Preferences, Scripting
Anwenderdokumentation
- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzlicher Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Programmeinstellungen, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, Hilf FreeCAD, Spende
- Hilfe: Tutorien, Video Tutorien
- Arbeitsbereiche: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework