Draft: Introduceţi Text
Draft Text |
poziția meniului |
---|
Draft → Text |
Ateliere |
Draft, Arch |
scurtătură |
T E |
Prezentat în versiune |
- |
A se vedea, de asemenea, |
Draft Label, Draft ShapeString |
Description
Descriere
Unealta Text inserează o porţiune de text într-un punct dat din documentul curent. În prealabil, seta'i în meniul Editare, opţiunea Preferinţe, mărimea şi culoarea textului în tab-ul Sarcini (Draft Tray toolbar.).
Pentru a crea forme de text solide, utilizați Draft ShapeString cu Part Extrude.
Usage
See also: Draft Tray and Draft Snap.
Mod de utilizare
- Apăsaţi butonul Draft Text ori apăsaţi tasta T, apoi tasta E.
- Daţi clic în fereastra de vizualizare 3D sau introduceţi coordonatele.
- Introduceţi textul dorit, apăsând tasta ENTER treceți la linie nouă.
- Apăsaţi DE DOUĂ ORI ENTER ca să terminaţi operaţia.
Opţiuni
The single character keyboard shortcuts available in the task panel can be changed. See Draft Preferences. The shortcuts mentioned here are the default shortcuts (for version 0.22).
Apăsând pe CTRL, snap punctul dvs. va fi ancorat la locațiile disponibile.
- Pentru a introduce manual coordonatele, pur și simplu introduceți numerele, apoi apăsați ENTER între fiecare componentă X, Y și Z.
- Apăsând ESC se va anula operația.
- Când editați textul, apăsând ENTER sau DOWN ARROW vă permite să introduceți sau să editați un rând următor de text.
- Apăsarea tastei UP ARROW vă permite să editați o linie anterioară de text.
- Apăsând ENTER de două ori(lăsând astfel ultima linie goală) adaugă textul în document și închide editorul.
Notes
- A Draft Text can be edited by double-clicking it in the Tree view. introduced in version 0.20
- Draft Texts created or saved with FreeCAD version 0.21 are not backward compatible.
Proprietăți
- DATEPosition: Punctul de bază al blocului de text
- DATELabel Text: conținutul blocului de text
- VEDEREMod afișare: Specifică dacă textul este aliniat la axele de scenă sau întotdeauna se confruntă cu camera
- VEDEREDimensiune font: Dimensiunea literelor
- VEDEREJustification: Specifică dacă textul este aliniat la stânga, la dreapta sau la centrul punctului de bază.
- VEDERELine Spacing: Specifică spațiul dintre liniile de text
- VEDERERotation: Specifică o rotație care trebuie aplicată textului
- VEDEREAxa de rotație: Specifică axa de utilizat pentru rotație
- VEDEREFont Name: fontul folosit pentru a desena textul. Poate fi un nume de font, cum ar fi "Arial", un stil implicit, cum ar fi "sans", "serif" sau "mono", sau o familie ca "Arial, Helvetica, sans" "Arial: Bold". În cazul în care fontul dat nu este găsit pe sistem, în locul acestuia se utilizează unul generic.
See also: Property editor.
A Draft Text object is derived from an App FeaturePython object and inherits all its properties. The following properties are additional unless otherwise stated.
Data
Base
- DatePlacement (
Placement
): specifies the position of the text in the 3D view. See Placement. - DateText (
StringList
): specifies the contents of the text. Each item in the list represents a new text line.
View
Annotation
- VizualizareAnnotation Style (
Enumeration
): specifies the annotation style applied to the text. See Draft AnnotationStyleEditor. - VizualizareScale Multiplier (
Float
): specifies the general scaling factor applied to the text.
Display Options
- VizualizareDisplay Mode (
Enumeration
): specifies how the text is displayed. If it isWorld
the text will be displayed on a plane defined by its DatePlacement. If it isScreen
the text will always face the screen. This is an inherited property. The mentioned options are the renamed options (introduced in version 0.21).
Graphics
- VizualizareLine Color (
Color
): not used. - VizualizareLine Width (
Float
): not used.
Text
- VizualizareFont Name (
Font
): specifies the font used to draw the text. It can be a font name, such asArial
, a default style such assans
,serif
ormono
, a family such asArial,Helvetica,sans
, or a name with a style such asArial:Bold
. If the given font is not found on the system, a default font is used instead. - VizualizareFont Size (
Length
): specifies the size of the letters. The text can be invisible in the 3D view if this value is very small. - VizualizareJustification (
Enumeration
): specifies if the alignment of the text:Left
,Center
orRight
. - VizualizareLine Spacing (
Float
): specifies the factor applied to the default line height of the text. - VizualizareText Color (
Color
): specifies the color of the text.
Scripting
Script-Programre
Instrumentul Text poate fi folosit în macro-uri şi de la consola Python cu ajutorul funcţiei următoare:
To create a Draft Text use the make_text
method (introduced in version 0.19) of the Draft module. This method replaces the deprecated makeText
method.
text = make_text(string, placement=None, screen=False)
- Creează un obiect
Text
, într-un punct dat, dacă este furnizat unFreeCAD.Vector
, care conține șirul sau șirurile dintr-o listă, câte un șir pe rând. stringlist
este un șir sau o listă de șiruri de caractere; dacă este o listă, fiecare element este afișat într-o singură linie- Se utilizează actualul Draft Linestyle specificat în preferințe.
- Dacă
screen
esteTrue
, textul se află întotdeauna în direcția de vizualizare a camerei, altfel se află pe planul XY
The view properties of text
can be changed by overwriting its attributes; for example, overwrite ViewObject.FontSize
with the new size in millimeters.
Exempluː
import FreeCAD as App
import Draft
doc = App.newDocument()
t1 = "This is a sample text"
p1 = App.Vector(0, 0, 0)
t2 = ["First line", "second line"]
p2 = App.Vector(1000, 1000, 0)
text1 = Draft.make_text(t1, p1)
text2 = Draft.make_text(t2, p2)
text1.ViewObject.FontSize = 200
text2.ViewObject.FontSize = 200
zaxis = App.Vector(0, 0, 1)
t3 = ["Upside", "down"]
p3 = App.Vector(-1000, -500, 0)
place3 = App.Placement(p3, App.Rotation(zaxis, 180))
text3 = Draft.make_text(t3, place3)
text3.ViewObject.FontSize = 200
doc.recompute()
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub