TechDraw HorizontalDimension/ru: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "{{Caption|Горизонтальное расстояние указанное между двумя произвольными точками фигуры.}}")
Line 24: Line 24:


[[Image:TechDraw_Dimension_Horizontal_example.png|200px]]
[[Image:TechDraw_Dimension_Horizontal_example.png|200px]]
{{Caption|Горизонтальное расстояние указанное между двумя произвольными точками фигуры.}}
{{Caption|Length dimension taken from two arbitrary nodes of the view; the distance is measured horizontally}}


==Применение==
==Применение==

Revision as of 14:21, 20 September 2021

Other languages:

Указать горизонтальный размер

Системное название
TechDraw_HorizontalDimension
Расположение в меню
TechDraw → Размеры → Указать горизонтальный размер
Верстаки
TechDraw
Быстрые клавиши
Shift + H
Представлено в версии
-
См. также
Указать длину, Указать вертикальный размер

Описание

The Horizontal Dimension tool adds a horizontal dimension to a View. The dimension may be between two vertices, the length of one edge or the horizontal distance between 2 edges. The distance will initially be the projected distance (ie as shown on the drawing), but this may be changed to the actual 3D distance using the TechDraw LinkDimension tool.

Горизонтальное расстояние указанное между двумя произвольными точками фигуры.

Применение

  1. Select the points or edge which define your measurement.
  2. Press the Horizontal Dimension button
  3. A dimension will be added to the View. The dimension may be dragged to the desired position.
  4. If needed, add tolerances as described in this page.

To change the properties of a dimension object either double-clicking it in the drawing or in the Tree view. This will open the dimension dialog.

Ограничения

Dimension objects are vulnerable to the "topological naming problem". See TechDraw LengthDimension for more information.

Свойства

See TechDraw LengthDimension.

Программирование

См. так же: TechDraw API и Основы составления скриптов FreeCAD.

The Horizontal Dimension tool can be used in macros and from the Python console by using the following functions:

dim1 = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewDimension','Dimension')
dim1.Type = "DistanceX"
dim1.References2D=[(view1, 'Edge1')]
rc = page.addView(dim1)