TechDraw "Указать угловой размер по 3 точкам"

From FreeCAD Documentation
This page is a translated version of the page TechDraw 3PtAngleDimension and the translation is 37% complete.
Outdated translations are marked like this.
Other languages:

Указать угловой размер по 3 точкам

Системное название
TechDraw_3PtAngleDimension
Расположение в меню
TechDraw → Указать угловой размер по 3 точкам
Верстаки
TechDraw
Быстрые клавиши
Нет
Представлено в версии
0.18
См. также
Указать угловой размер

Описание

The TechDraw 3PtAngleDimension tool adds an angular dimension to a View. The dimension shows the interior angle between three points.

Measuring the angle between three points

Применение

  1. Select three points. The second point will be the apex of the angle. The geometry may be selected in the 3D view or in the drawing.
  2. If you have selected geometry in the 3D view: add the correct TechDraw View to the selection by selecting it in the Tree view.
  3. There are several ways to invoke the tool:
  4. A dimension is added to the View.
  5. The dimension may be dragged to the desired position.
  6. If needed, add tolerances as described on this page.

Display 3D measurement

See TechDraw LengthDimension.

Change properties

To change the properties of a dimension object either double-click it in the drawing or in the Tree view. This will open the Dimension dialog.

Ограничения

Dimension objects are vulnerable to the "topological naming problem". See TechDraw LengthDimension.

Notes

See TechDraw LengthDimension.

Свойства

See TechDraw LengthDimension.