Dimensiune Unghiulară TechDraw

From FreeCAD Documentation
Revision as of 06:51, 26 July 2023 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

TechDraw Dimension Angle

Menu location
TechDraw → Dimension Angle
Workbenches
TechDraw
Default shortcut
None
Introduced in version
-
See also
None

Descriere

Instrumentul pentru cote unghiulare adaugă o cotă unghiulară unei imagini. Cota poate fi unghi interior, și între oricare două segment ede line draptă care formează muchii. Unghiul va fi inițial unghiul proiectat(adică așa cum este reprezentată în desen), dar aceast unghi poate fi înlocuit prin unghiul 3D real utilizând instrumentul Link Dimension .

The TechDraw AngleDimension tool adds an angular dimension to a View. The dimension shows the interior angle between two straight edges.

Measuring the angle between two straight edges

Cum se folosește

  1. Select two straight edges. The geometry may be selected in the 3D view or in the drawing.
  2. If you have selected geometry in the 3D view: add the correct TechDraw View to the selection by selecting it in the Tree view.
  3. There are several ways to invoke the tool:
    • Press the Insert Angle Dimension button.
    • Select the TechDraw → Dimensions → Insert Angle Dimension option from the menu.
  4. A dimension is added to the View.
  5. The dimension may be dragged to the desired position.
  6. If needed, add tolerances as described on this page.

Display 3D measurement

See TechDraw LengthDimension.

Change properties

To change the properties of a dimension object either double-click it in the drawing or in the Tree view. This will open the Dimension dialog.

Limitations

Dimension objects are vulnerable to the "topological naming problem". See TechDraw LengthDimension.

Notes

See TechDraw LengthDimension.

Proprietăți

See TechDraw LengthDimension.

Script

Cotele tip unghi pot fi adăugate la Pages utilizând Python.

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

The Angle Dimension tool can be used in macros and from the Python console by using the following functions:

dim1 = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewDimension','Dimension')
dim1.Type = "Angle"
dim1.References2D=[(view1, 'Edge1')]
rc = page.addView(dim1)