Sketcher Остановить операцию

From FreeCAD Documentation
Revision as of 15:01, 18 October 2020 by Baritone (talk | contribs) (Created page with "==Описание==")

Остановить операцию

Системное название
Sketcher StopOperation
Расположение в меню
Sketch → Остановить операцию
Верстаки
Sketcher
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Описание

Stop operation stops a currently active command while a sketch is being edited; this may mean a drawing operation, a constraining operation, a B-spline operation, etc.

This is similar to pressing the Esc key.

Использование

  1. Make sure a sketch is in Edit mode.
  2. Make sure a tool is active such as Create polyline, Constrain distance Y, or Move.
  3. Click on Stop operation or choose Sketch → Stop operation from the top menu.
  4. The tool is deactivated and the pointer returns to being a simple pointer.