Sketcher RectangularArray/it: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 37: Line 37:
* '''Equal vertical/horizontal spacing''': If the vertical distance between the array elements should be the same as the horizontal distance.
* '''Equal vertical/horizontal spacing''': If the vertical distance between the array elements should be the same as the horizontal distance.
* '''Constrain inter-element separation''': When this is checked, the distance between the array elements will be constrained.</br>If you for example only know that you need a 23 x 15 mm array, use this option to later be able to change these constraints to the dimensions you need.
* '''Constrain inter-element separation''': When this is checked, the distance between the array elements will be constrained.</br>If you for example only know that you need a 23 x 15 mm array, use this option to later be able to change these constraints to the dimensions you need.
* '''Clone''': If selected, dimensional constraints are replaced by geometric constraints in the copies, so that any change in the original element is also reflected in the copies.
* '''Clone''': ??





Revision as of 14:38, 25 February 2023

Serie rettangolare

Posizione nel menu
Sketch → Strumenti → Serie rettangolare
Ambiente
Sketcher, PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
0.16
Vedere anche
Nessuno

Descrizione

Crea una schiera di elementi dello schizzo selezionati.

Utilizzo

  1. Selezionare uno o più elementi nella scheda Azioni o nella vista 3D.
  2. Clccare su o scegliere Sketch Strumenti Serie rettangolare dal menu in alto.
  3. Appare un menu pop-up che permette di impostare le diverse opzioni della schiera.
  4. Selezionare il punto di destinazione dell'operazione nella vista 3D.



Le opzioni per la serie

Options

Rectangular array has the following options:

  • Colums: The number of columns for the array.
  • Rows: The number of rows for the array.
  • Equal vertical/horizontal spacing: If the vertical distance between the array elements should be the same as the horizontal distance.
  • Constrain inter-element separation: When this is checked, the distance between the array elements will be constrained.
    If you for example only know that you need a 23 x 15 mm array, use this option to later be able to change these constraints to the dimensions you need.
  • Clone: If selected, dimensional constraints are replaced by geometric constraints in the copies, so that any change in the original element is also reflected in the copies.