Sketcher NewSketch/es: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "Esto creará un nuevo Croquis.")
Line 19: Line 19:
==Descripción==
==Descripción==


This will create a new [[Sketcher_Workbench|sketch]].
Esto creará un nuevo [[Sketcher_Workbench/es|Croquis]].


Note that the [[Image:Workbench_PartDesign.svg|24px]] [[PartDesign_Workbench|PartDesign Workbench]] has its own [[PartDesign_NewSketch|new sketch]] tool, when working on a [[PartDesign_Body|PartDesign body]] it is preferable to use that tool.
Note that the [[Image:Workbench_PartDesign.svg|24px]] [[PartDesign_Workbench|PartDesign Workbench]] has its own [[PartDesign_NewSketch|new sketch]] tool, when working on a [[PartDesign_Body|PartDesign body]] it is preferable to use that tool.

Revision as of 20:26, 4 July 2021

Croquizador Nuevo croquis

Ubicación en el Menú
Croquis → Crear croquis
Entornos de trabajo
Croquizador
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
DiseñoPieza Nuevo croquis, Croquizador MapearCroquis, Croquizador Reorientar

Descripción

Esto creará un nuevo Croquis.

Note that the PartDesign Workbench has its own new sketch tool, when working on a PartDesign body it is preferable to use that tool.

Utilización

Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the

  • XY-Plane
  • XZ-Plane
  • YZ-Plane

You can change an offset to any of the three planes and the side of the offset.

Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.

Notas

The sketch can be re-mapped to another already existing face using the Map Sketch - Command.

The sketch can be moved in the 3D view using Placement.