Sketcher CreatePoint/es: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Docnav/es |Simetría de croquis |Línea por 2 puntos |Croqizador |IconL=Sketcher_MirrorSketch.svg |I...")
No edit summary
Line 9: Line 9:
}}
}}


{{GuiCommand/es
<div class="mw-translate-fuzzy">
|Name=Sketcher CreatePoint
{{GuiCommand/es|Name=Sketcher CreatePoint|Name/es=Sketcher Point|Workbenches=[[Sketcher Workbench/es|Sketcher]]|MenuLocation=Sketch → Sketcher geometries → Create point}}
|Name/es=Croqizador Punto
</div>
|MenuLocation=Croquis → Geometrías Croqizador→ Crear punto
|Workbenches=[[Sketcher_Workbench/es|Croqizador]]
}}


==Descripción==
==Descripción==

Revision as of 09:34, 20 June 2021

Croqizador Punto

Ubicación en el Menú
Croquis → Geometrías Croqizador→ Crear punto
Entornos de trabajo
Croqizador
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Ninguno

Descripción

The Point tool creates a point in the current sketch, which can be used for constructing geometry elements. The point is always an construction element and does not show up in the 3D-view.

Point in the sketcher

Utilización

  • Click on the button Create point, to activate the function.
  • Clicking in the sketch creates a point.
  • Pressing Esc or clicking the right mouse button cancels the function.

Opciones

A mode to snap to the grid can be set in the Sketcher Preferences. The point snaps then to the grid, if it has less than 25% grid distance to a grid line. The snap mode does not fix them to the grid. The points can be moved with the mouse or constraints to other locations.

Limitaciones

The created point is not available outside of the sketch. In case a point is needed in the 3D-view, use the PartDesign Point for a datum point or the Part Point instead.