Sketcher ConstrainEqual/ru: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
No edit summary
Line 9: Line 9:
}}
}}


{{GuiCommand/ru
<div class="mw-translate-fuzzy">
{{GuiCommand
|Name=Sketcher ConstrainEqual
|Name=Sketcher ConstrainEqual
|Workbenches=[[Sketcher Workbench|Sketcher]]
|Name/ru=Sketcher ConstrainEqual
|MenuLocation=Sketch → Sketcher constraints → Constrain equal
|MenuLocation=Sketch → Sketcher constraints → Constrain equal
|Workbenches=[[Sketcher_Workbench/ru|Sketcher]]
|Shortcut=E
|Shortcut=E
|SeeAlso=[[Sketcher_ConstrainRadius|Constrain radius]]
|SeeAlso=[[Sketcher_ConstrainRadius/ru|Sketcher Constrain radius]]
}}
}}
</div>


==Описание==
==Описание==

Revision as of 08:36, 16 December 2020

Sketcher ConstrainEqual

Системное название
Sketcher ConstrainEqual
Расположение в меню
Sketch → Sketcher constraints → Constrain equal
Верстаки
Sketcher
Быстрые клавиши
E
Представлено в версии
-
См. также
Sketcher Constrain radius

Описание

Ограничение Constrain Equal заставляет два или более отрезка в линии, ломаной линии или прямоугольнике иметь одинаковую длину. При применении к дугам или окружностям радиусы ограничены, чтобы быть равными. Его нельзя применять к геометрическим примитивам, которые не относятся к одному и тому же типу (например, отрезки и дуги).

Oперация

The example sketch below contains a number of sketch primitives (line,poly-line, rectangle, arc and circle).

Select two or more line segments (e.g. line and one side of the rectangle).

Click on Constrain equal in the Sketcher toolbar (in either the Sketcher or Part Design workbenches) or select the Constrain Equal menu item from the Sketcher constraints sub menu item in either the Sketch or Part Design menu item depending upon which workbench is selected (Sketcher or Part Design) to apply the constraint to the selected items.

Now select the arc and the circle in the sketch.

and apply Constrain equal as before.

Now select the line segment, all segments of the poly-line and one of the remaining unconstrained sides of the rectangle

and apply Constrain equal as before.

Select the line segment and the arc

and apply Constrain equal as before. A pop-up message indicates that the constrained items have to be of the same geometrical type (lines of zero curvature or lines of non-zero curvature).