Sketcher ConnectLines/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "==Применение==")
(Created page with "==Примечания==")
Line 31: Line 31:
#* Use the {{MenuCommand|Sketch → Sketcher tools → [[File:Sketcher_ConnectLines.svg|16px]] Connect Edges}} entry from the top menu.
#* Use the {{MenuCommand|Sketch → Sketcher tools → [[File:Sketcher_ConnectLines.svg|16px]] Connect Edges}} entry from the top menu.


==Примечания==
==Notes==


Before using this command make sure that obvious constraints (horizontal, vertical, tangential) are already applied to the elements.
Before using this command make sure that obvious constraints (horizontal, vertical, tangential) are already applied to the elements.

Revision as of 20:14, 11 September 2021

Sketcher ConnectLines

Системное название
Sketcher ConnectLines
Расположение в меню
Sketch → Инструменты для эскиза → Соединить элементы
Верстаки
Sketcher
Быстрые клавиши
Ctrl+Shift+K
Представлено в версии
0.15
См. также
Sketcher ConstrainCoincident

Описание

Applies Coincident constraints to endpoints with the same coordinates of the selected elements.

Применение

  1. Select the elements in the 3D view or in the Task panel on the left side of the screen
  2. Invoke the command using several methods:
    • Press the Connect lines button.
    • Use the Ctrl + Shift + K keyboard shortcut.
    • Use the Sketch → Sketcher tools → Connect Edges entry from the top menu.

Примечания

Before using this command make sure that obvious constraints (horizontal, vertical, tangential) are already applied to the elements. Selecting the elements in a counter-clock-wise order seems to produce better results.