Points Workbench/ro: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 2: Line 2:
[[Image:PointsWorkbench.svg|64px]]
[[Image:PointsWorkbench.svg|64px]]
== Introducere ==
== Introducere ==
Atelierul [[Points Workbench]] "Nor de Puncte" a fost creat ca să vă ofere unelte specifice pentru lucrul cu [http://en.wikipedia.org/wiki/Point_cloud point clouds]. Acest Atelier ee află în dezvoltare.
Atelierul [[Points Workbench]] "Nor de Puncte" a fost creat ca să vă ofere unelte specifice pentru lucrul cu [http://en.wikipedia.org/wiki/Point_cloud point clouds]. Acest Atelier se află în curs de dezvoltare.


A point cloud is a collection of points in 3D space. A point cloud is generally produced by scanning the surface of a solid object. Then the cloud of points can be used for many purposes including building a mesh for the object, reconstructing the surfaces and solid volumes, reverse engineering, as well as for visualization and quality inspection of parts.
A point cloud is a collection of points in 3D space. A point cloud is generally produced by scanning the surface of a solid object. Then the cloud of points can be used for many purposes including building a mesh for the object, reconstructing the surfaces and solid volumes, reverse engineering, as well as for visualization and quality inspection of parts.

Revision as of 15:33, 29 December 2018

Introducere

Atelierul Points Workbench "Nor de Puncte" a fost creat ca să vă ofere unelte specifice pentru lucrul cu point clouds. Acest Atelier se află în curs de dezvoltare.

A point cloud is a collection of points in 3D space. A point cloud is generally produced by scanning the surface of a solid object. Then the cloud of points can be used for many purposes including building a mesh for the object, reconstructing the surfaces and solid volumes, reverse engineering, as well as for visualization and quality inspection of parts.

Aceste scule și instrumente sunt deja disponibile:

În momentul de față, Atelierul de lucru pentru norul de puncte nu are rutine automate pentru a face față punctelor importate.
Dar ați putea prin conectarea la biblioteca cloud points (versiunea Windows a FreeCAD are deja această capacitate)
utilizați comenzile python pentru a vă procesa în continuare datele, consultați forumul aici și = 13 & t = 16103 aici (sub-forma germană).
O altă discuție interesantă aici (engleză Help-Forum).

See the discussions in the forum:

Bineînțeles că ați putea folosi și Atelierul de lucru Draft în cadrul FreeCAD și să conectați punctele folosind elemente de proiect.
Utilizarea "punctului final" al modulului snap-mode va asigura accesarea punctelor.