Part: Cerchio

From FreeCAD Documentation
Revision as of 22:35, 5 January 2024 by Marco T (talk | contribs) (Created page with "Un Part Cerchio è infatti un arco circolare chiuso in senso antiorario, può essere trasformato in un arco modificando le sue proprietà {{PropertyData|Angle1}} e/o {{PropertyData|Angle2}}.")

Part Cerchio

Posizione nel menu
Parte → Crea primitive → Cerchio
Ambiente
Part, OpenSCAD
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Part Primitive

Descrizione

Un Part Cerchio è una forma parametrica che può essere creata con il comando Part Primitive . Nel sistema di coordinate definito dalla sua proprietà DatiPlacement, il cerchio giace sul piano XY con il centro nell'origine.

Un Part Cerchio è infatti un arco circolare chiuso in senso antiorario, può essere trasformato in un arco modificando le sue proprietà DatiAngle1 e/o DatiAngle2.

Utilizzo

See Part Primitives.

A Part Circle can alternatively be created by selecting three points:

  1. In the task panel of the Part Primitives command select the Circle option from the dropdown list.
  2. Press the From three points button.
  3. Select three vertices in the 3D view. There is no need to hold down the Ctrl key.
  4. A circle is created.
  5. The selected vertices are only used at creation time to calculate the DatiRadius and DatiPlacement of the circle.

Example

Part Circle from the scripting example

A Part Circle object created with the scripting example below is shown here.

Proprietà

See also: Property editor.

A Part Circle object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Attachment

The object has the same attachment properties as a Part Part2DObject.

Base

  • Raggio: il raggio del bordo curvo (arco o cerchio)
  • Angolo 1: inizio del bordo curvo, (gradi in senso antiorario), il valore di default è 0
  • Angolo 2: fine del bordo curvo (gradi in senso antiorario), il valore di default è 360

Scripting

See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.

A Part Circle can be created with the addObject() method of the document:

circle = FreeCAD.ActiveDocument.addObject("Part::Circle", "myCircle")
  • Where "myCircle" is the name for the object.
  • The function returns the newly created object.

Example:

import FreeCAD as App

doc = App.activeDocument()

circle = doc.addObject("Part::Circle", "myCircle")
circle.Radius = 10
circle.Angle1 = 45
circle.Angle2 = 225
circle.Placement = App.Placement(App.Vector(1, 2, 3), App.Rotation(30, 45, 10))

doc.recompute()