Part: Operazione booleana
|
|
| Posizione nel menu |
|---|
| Parte → Operazioni booleane → Operazione booleana... |
| Ambiente |
| Part |
| Avvio veloce |
| Nessuno |
| Introdotto nella versione |
| - |
| Vedere anche |
| Part Taglio, Part Unione, Part Intersezione, Part Seziona |
Descrizione
Part Operazione booleana è uno strumento booleano generico tutto in uno. Consente di specificare gli oggetti e le operazioni da eseguire tramite un'unica finestra di dialogo.
Per un accesso più rapido a queste operazioni, usare Part Taglio,
Part Unione,
Part Intersezione and
Part Seziona.
Il pannello delle azioni per l'Operazione Booleana
Utilizzo
- Optionally select one or two shapes.
- There are several ways to invoke the command:
- Press the
Boolean Operation button.
- Select the Part → Boolean →
Boolean Operation option from the menu.
- Press the
- The Boolean Operation task panel opens.
- Selected shapes are already checked in the shape lists.
- Select the appropriate Boolean Operation. Union, Difference, and intersection only accept solid shapes, Section also accepts non-solid shapes.
- Optionally (un)check an item in the First shape list.
- Optionally (un)check an item in the Second shape list.
- Optionally press the Swap Selection button to swap the shapes. This only makes sense for the Difference operation, as its result depends on the order.
- Do one of the following:
- Press the Apply button to confirm:
- A Fuse, Cut, Common, or Section object is created according to the selected operation.
- Optionally keep creating boolean objects.
- Press the Close button to close the task panel and finish the command.
- Press the Apply button to confirm:
Problemi di complanarità
Le operazioni booleane sono eseguite dal kernel di geometria interno, OpenCASCADE Technology (OCCT). Questa libreria a volte ha problemi a produrre risultati booleani quando gli oggetti di input condividono un bordo o una faccia. Per essere sicuri che l'operazione booleana abbia successo, la raccomandazione è che le forme si intersechino tra loro; ciò significa che nella maggior parte dei casi, una forma dovrebbe sporgere o essere di dimensioni maggiori rispetto all'altra forma.
In caso di complanarità, anche se la prima operazione booleana riesce, le successive operazioni booleane potrebbero non riuscire. In questo caso, il problema potrebbe non essere nell'ultima operazione eseguita, ma in quelle precedenti, ovvero nelle operazioni nidificate come indicato nella vista ad albero. Per risolvere questi problemi, si consiglia di utilizzare lo strumento Controlla la geometria per ispezionare tutti gli oggetti alla ricerca di problemi.
A sinistra: forme che condividono una faccia, un taglio booleano può produrre risultati errati. A destra: forme che si intersecano chiaramente tra loro, il taglio booleano avrà successo nella maggior parte dei casi.
A sinistra: forme che condividono una faccia, un'unione booleana può produrre risultati errati. A destra: forme che si intersecano chiaramente tra loro, l'unione booleana avrà successo nella maggior parte dei casi.
- Creation and modification: New Sketch, Extrude, Revolve, Mirror, Scale, Fillet, Chamfer, Face From Wires, Ruled Surface, Loft, Sweep, Section, Cross-Sections, 3D Offset, 2D Offset, Thickness, Project on Surface, Appearance per Face
- Boolean: Compound, Explode Compound, Compound Filter, Boolean Operation, Cut, Union, Intersection, Connect Shapes, Embed Shapes, Cutout Shape, Boolean Fragments, Slice Apart, Slice to Compound, Boolean XOR, Check Geometry, Defeaturing
- Other tools: Box Selection, Shape From Mesh, Points From Shape, Convert to Solid, Reverse Shapes, Simple Copy, Transformed Copy, Shape Element Copy, Refine Shape, Set Tolerance, Persistent Section Cut, Attachment
- Preferences: Preferences, Fine tuning
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub
