Part: Estrudi
Appearance
Outdated translations are marked like this.
|
|
| Posizione nel menu |
|---|
| Parte → Estrudi... |
| Ambiente |
| Part |
| Avvio veloce |
| Nessuno |
| Introdotto nella versione |
| - |
| Vedere anche |
| Taglia/estendi, |
Descrizione
Part Estrudi estende una forma ad una distanza specificata, in una direzione specificata. Il tipo di forma di output varierà in base al tipo di forma di input e alle opzioni selezionate.
Di solito, secondo il tipo di forma in ingresso, si ottiene le seguente forma:
- Estrudere un Vertex (punto), produce un Edge (Linea)
- Estrudere una linea aperta (es. linea, arco), produce una faccia aperta (es. piano)
- Estrudere una linea chiusa (es. cerchio), produce a scelta una faccia chiusa (es. un fondo di un cilindro) oppure se il parametro "solid" è "true" produce un solido (es. un cilindro solido)
- Estrudere un Wire aperto (es. un Draft Wire), produce un guscio aperto (diverse facce unite)
- Estrudere un Wire chiuso (es. un Draft Wire), produce a scelta un guscio oppure se il parametro "solid" è "true" produce un solido
- Estrudere una faccia (es. piano), produce un solido (es. Cuboide)
- Estrudere una
Draft Forma da testo, produce un composto di solidi (la stringa è un composto di lettere che sono ciascuna un solido)
- Estrudere una shell di facce, produce un Compsolid.
Esempi di estrusione
Utilizzo
- Selezionare la forma o le forme nella vista 3D o nel modello vista ad albero
- Fare clic sul pulsante
Part Estrudi nella barra degli strumenti o dal menu Parte → Estrudi...
- Impostare la direzione, la lunghezza e facoltativamente altri parametri (vedere la seguente sezione Parametri per maggiori dettagli).
- Fare clic su OK.
L'albero del modello elenca tanti oggetti estrusi quante erano le forme selezionate. Ogni forma di partenza è posizionata sotto il suo oggetto estrusione.
Pannello Azioni

- OK crea l'estrusione e chiude la finestra di dialogo.
- Close chiude il dialogo, senza fare nulla.
- Apply crea l'estrusione, ma non chiude la finestra di dialogo. È quindi possibile selezionare un'altra forma nell'elenco in basso e creare ulteriori estrusioni. Facendo clic su Applica più volte si creano molte estrusioni.
- 'Direction' pulsante di opzioni: imposta il modo in cui viene calcolata la direzione di estrusione.
- Reversed checkbox: reverses the extrusion direction.
- Select fare clic su di esso, quindi selezionare un bordo nella Vista 3D. Questo bordo appare nel campo di testo accanto al pulsante, nel formato "ObjectName:EdgeN". Si può anche digitare il link manualmente. I valori X, Y, Z sono riempiti secondo la direzione del bordo.
- pulsanti X, Y, Z fare clic sul pulsante X per impostare la direzione dell'estrusione sull'asse X positivo. Fare nuovamente clic per impostare l'asse X negativo.
- campi di input X, Y, Z imposta o visualizza il vettore di direzione dell'estrusione. Se entrambe le lunghezze sono pari a zero, la lunghezza di questo vettore imposta la lunghezza dell'estrusione ed i valori sono sempre espressi in mm, indipendentemente dalle preferenze dell'unità di misura.
- Length campi: impostano la lunghezza dell'estrusione. Questi campi di input hanno il supporto dell'unità di misura.
- Symmetric: distribuisce l'estrusione in entrambe le direzioni, in modo che il profilo rimanga nel mezzo.
- Taper Outward Angle: angolo positivo indica che il profilo viene espanso all'altra estremità dell'estrusione.
- Taper angle against: idem for the against direction.
- Create Solid casella di controllo: se selezionata, l'estrusione di un contorno o bordo chiuso produce una faccia. Se è stato preselezionato un contorno chiuso prima di richiamare l'estrusione Part viene controllato di default.
- Shape list: qui si seleziona quali forme estrudere. Se sono selezionati più oggetti, vengono creati più oggetti di estrusione.
Note
- Gli oggetti App Link collegati ai tipi di oggetti appropriati e i contenitori App Part con gli oggetti visibili appropriati all'interno possono essere utilizzati anche come profili e per specificare la direzione. disponibile dalla versione 0.20
- La finestra di dialogo delle attività non offre ancora un'anteprima. Il pulsante Applica creerà una estrusione ogni volta che si fa clic su di esso, che può essere utile come anteprima; tuttavia, l'estrusione rimarrà e ne verrà creata una ulteriore quando si farà clic su OK. Annulla può essere utile per ripulirla prima di fare clic su OK.
Comparazione con PartDesign Estrusione
Anche PartDesign Estrusione è una funzionalità di estrusione, ma presenta importanti differenze:
- Part Estrudi crea sempre una forma autonoma. PartDesign Estrusione fonde il risultato dell'estrusione con il resto del corpo.
- Part Estrudi non è importante dove si trova nell'albero del modello. PartDesign Estrusione può esistere solo all'interno di un PartDesign Corpo.
- Part Estrudi può estrudere qualsiasi oggetto che abbia una geometria Part (forma OpenCASCADE), ad eccezione dei solidi e dei CompSolid.
- Part Estrudi può estrudere singole facce di altri oggetti. PartDesign Estrusione accetterà come profilo solo lo schizzo o le facce degli oggetti PartDesign.
Properties
See also: Property View.
A Part Extude object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Data
Extrude
- DatiBase (
Link): The shape to extrude. - DatiDir (
Vector): The extrusion direction. If DatiDir Mode isCustomyou can edit this property, otherwise it is read-only. - DatiDir Mode (
Enumeration): Sets how DatiDir is controlled.Custommeans DatiDir is editable.Edgemeans DatiDir is obtained from an edge (line) linked by DatiDir Link.Normalmeans DatiDir is perpendicular to the plane of the input shape. - DatiDir Link (
LinkSub): Parametric link to an edge (line) that sets the extrusion direction. - DatiLength Fwd (
Distance): Length of extrusion along direction. If both DatiLength Fwd and DatiLength Rev are zero, the length of the DatiDir vector is used. - DatiLength Rev (
Distance): Length of additional extrusion, against direction. - DatiSolid (
Bool): If true, extruding a closed edge or a closed wire will yield a solid. If False, a shell will result. - DatiReversed (
Bool): Reverses the extrusion direction. - DatiSymmetric (
Bool): If true, extrusion is centered at the input shape, and the total length is DatiLength Fwd. DatiLength Rev is ignored. - DatiTaper Angle (
Angle): Applies an angle to the extrusion, so that sides of the extrusion are drafted by the specified angle. Positive angle means the cross-section expands. Inner structures receive the opposite taper angle. This is done to facilitate the design of molds and molded parts. - DatiTaper Angle Rev (
Angle): Sets the taper for the reversed part of the extrusion (the part from DatiLength Rev). - Dati (Hidden)Face Maker Class (
String): Superseded by DatiFace Make Mode (read-only). - DatiFace Make Mode (
Enumeration): If DatiSolid is true, the facemaker class to use when converting wires to faces, otherwise ignored. The options areSimple,Cheese,ExtrusionandBullseye(default).
- Creation and modification: New Sketch, Extrude, Revolve, Mirror, Scale, Fillet, Chamfer, Face From Wires, Ruled Surface, Loft, Sweep, Section, Cross-Sections, 3D Offset, 2D Offset, Thickness, Project on Surface, Appearance per Face
- Boolean: Compound, Explode Compound, Compound Filter, Boolean Operation, Cut, Union, Intersection, Connect Shapes, Embed Shapes, Cutout Shape, Boolean Fragments, Slice Apart, Slice to Compound, Boolean XOR, Check Geometry, Defeaturing
- Other tools: Box Selection, Shape From Mesh, Points From Shape, Convert to Solid, Reverse Shapes, Simple Copy, Transformed Copy, Shape Element Copy, Refine Shape, Set Tolerance, Persistent Section Cut, Attachment
- Preferences: Preferences, Fine tuning
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub