PartDesign MultiTransform/it: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 22: Line 22:
==Descrizione==
==Descrizione==


<div class="mw-translate-fuzzy">
Crea una combinazioni di trasformazioni - Lo strumento {{Button|[[Image:PartDesign_MultiTransform.svg|16px|]] Multitrasformazione}} utilizza una (o una serie di) funzioni come input e consente all'utente di applicare progressivamente più trasformazioni a tale funzione (o set di funzioni), in sequenza, creando una trasformazione combinata o composta.
Crea una combinazioni di trasformazioni - Lo strumento {{Button|[[Image:PartDesign_MultiTransform.svg|16px|]] Multitrasformazione}} utilizza una (o una serie di) funzioni come input e consente all'utente di applicare progressivamente più trasformazioni a tale funzione (o set di funzioni), in sequenza, creando una trasformazione combinata o composta.
</div>


The available transformations are: [[Image:PartDesign_Mirrored.svg|16px|link=PartDesign_Mirrored]] [[PartDesign_Mirrored|Mirrored]], [[Image:PartDesign_LinearPattern.svg|16px|link=PartDesign_LinearPattern]] [[PartDesign_LinearPattern|LinearPattern]], [[Image:PartDesign_PolarPattern.svg|16px|link=PartDesign_PolarPattern]] [[PartDesign_PolarPattern|PolarPattern]] and [[Image:PartDesign_Scaled.svg|16px|link=PartDesign_Scaled]] [[PartDesign_Scaled|Scaled]]. The first three are also available as separate tools.
Ad esempio, per produrre la flangia con una doppia fila di fori come mostrato di seguito:
#selezionare il foro come funzione (base) nella struttura del modello
#cliccare sull'icona {{Button|[[Image:PartDesign_MultiTransform.svg|16px|]] Multitrasformazione}}
#aggiugere una serie lineare con due occorrenze nella direzione X.
#aggiungere una serie polare con otto occorrenze attorno all'asse Y.


[[Image:multitransform_example.png|600px]]
[[Image:multitransform_example.png|600px]]
<div class="mw-translate-fuzzy">
{{Caption|Flangia con doppia fila di fori. Serie di fori creati con lo strumento 'Multitrasformazione'.}}
{{Caption|Flangia con doppia fila di fori. Serie di fori creati con lo strumento 'Multitrasformazione'.}}

==Usage==

<div class="mw-translate-fuzzy">
==Utilizzo==
Prima di iniziare uno dei metodi seguenti, assicurarsi che l'oggetto {{Button|[[Image:PartDesign_Body.svg|16px|link=PartDesign_Body/it]] [[PartDesign_Body/it|Corpo]]}} necessario sia [[PartDesign_Body/it#Stato attivo|attivo]]; in caso contrario, riceve un messaggio pop-up di errore che indica che è necessario un oggetto {{Button|[[Image:PartDesign_Body.svg|16px|link=PartDesign_Body]] [[PartDesign_Body/it|Corpo]]}} attivo prima di usare lo strumento {{Button|[[Image:PartDesign_MultiTransform.svg|16px|link=PartDesign_MultiTransform/it]] Multitrasformazione}}.
</div>
</div>


==Usage==
===Standard Method===


=== Create ===
<div class="mw-translate-fuzzy">
===Metodo standard===
Questo metodo inizia senza funzioni di trasformazione esistenti e senza selezioni nella finestra o nella struttura del modello.<BR>Quando questo metodo è completato l'oggetto {{Button|[[Image:PartDesign_MultiTransform.svg|16px]] Multitrasformazione}} dovrebbe diventare correttamente la "Punta" dell'oggetto Body.
</div>


# Optionally [[PartDesign_Body#Active_status|activate]] the correct Body.
<div class="mw-translate-fuzzy">
# Optionally select one or more features in the [[Tree_view|Tree view]] or the [[3D_view|3D view]].
# Cliccare sull'icona {{Button|[[Image:PartDesign_MultiTransform.svg|16px|]] Multitrasformazione}} per avviare l'operazione
# There are several ways to invoke the tool:
# Si apre la finestra per selezionare la funzione.<BR>Dall'elenco, selezionare una funzione iniziale da utilizzare per le trasformazioni e fare clic su {{Button|OK}} per procedere.<BR>È possibile aggiungere funzionià aggiuntive nel passaggio successivo.[[Image:PartDesign-MultiTransform-Select_feature.png|center|300px]]
#* Press the {{Button|[[Image:PartDesign_MultiTransform.svg|16px]] [[PartDesign_MultiTransform|Create MultiTransform]]}} button.
# Vengono visualizzate le finestre '''Transformed features message''' e '''MultiTransform Parameters'''.<BR>Si vede l'etichetta della funzione selezionata nella vista Elenco funzioni, sotto i pulsanti {{Button| Aggiungi funzione}} e {{Button| Rimuovi funzione}}.[[Image:PartDesign-MultiTransform-General.png|center|300px]]<BR>Se si desidera includere funzionalità aggiuntive per le trasformazioni, seguire queste istruzioni:
#* Select the {{MenuCommand|Part Design → Apply a pattern → [[Image:PartDesign_MultiTransform.svg|16px]] Create MultiTransform}} option from the menu.
## Cliccare su {{Button|Aggiungi funzione}}
# If there is no active Body, and there are two or more Bodies in the document, the {{MenuCommand|Active Body Required}} dialog will open and prompt you to activate one. If there is a single Body it will be activated automatically.
## Passare alla vista ad albero del modello (fare clic sulla scheda '''Modello''')
# If no features were selected the {{MenuCommand|Select feature}} [[Task_panel|task panel]] opens: select one or more (hold down the {{KEY|Ctrl}} key) from the list and press the {{Button|OK}} button.
## Selezionare la funzione che si desidera aggiungere e renderla visibile (barra spaziatrice, o clic con il pulsante destro del mouse e attiva la visibilità).<BR>'''Nota:''' Ciò nasconde la funzione precedentemente visibile.
# The {{MenuCommand|MultiTransform parameters}} [[Task_panel|task panel]] opens. See [[#Options|Options]] for more information.
## Fare clic su qualsiasi cosa nella vista 3D.
# Press the {{Button|OK}} button at the top to finish.
## Fare clic sulla scheda '''Azioni''' nella vista combinata per tornare alla finestra '''Parametri MultiTransform'''.
## Si deve vedere l'etichetta della funzione selezionata di recente nell'elenco delle funzioni.
# Sotto la vista dell'elenco delle caratteristiche è presente la vista dell'elenco '''Trasformazioni'''. All'interno si deve vedere il testo, "Fare clic destro per aggiungere".
# Aggiungere una trasformazione facendo clic con il pulsante destro del mouse nella vista elenco '''Trasformazioni''' per visualizzare l'elenco delle opzioni.[[Image:PartDesign-MultiTransform-Transformations_Right_Click.png|center|300px]]
## Aggiungere la trasformazione desiderata selezionandola nell'elenco delle opzioni.
## La nuova voce di trasformazione viene visualizzata nell'elenco '''Trasformazioni''' con le impostazioni corrispondenti visualizzate sotto l'elenco.[[Image:PartDesign-MultiTransform-Transformations-add_linear_pattern.png|center|300px]]
## Regolare le impostazioni per la nuova trasformazione. (Si vede l'anteprima nella finestra.)
## Fare clic sul pulsante {{Button|OK}} sotto queste impostazioni per salvare la nuova trasformazione.
# Continuare ad aggiungere trasformazioni nell'ordine in cui si desidera applicarle utilizzando il passaggio 5 precedente.
# È inoltre possibile modificare, eliminare e spostare (modificare l'ordine delle) trasformazioni secondo necessità facendo clic con il pulsante destro del mouse su una trasformazione nell'elenco "Trasformazioni" e selezionando l'opzione corrispondente.
# Quando si ha finito di aggiungere e modificare le trasformazioni, fare clic sul pulsante {{Button|OK}} in alto per salvare la Multitrasformazione e uscire.
</div>


===Alternate Method 1===
=== Edit ===


# Do one of the following:
<div class="mw-translate-fuzzy">
#* Double-click the MultiTransform object in the [[Tree_view|Tree view]].
===Metodo alternativo 1===
#* Right-click the MultiTransform object in the [[Tree_view|Tree view]] and select {{MenuCommand|Edit MultiTransform}} from the context menu.
Questo metodo inizia con una funzione di trasformazione esistente in oggetto {{Button|[[Image:PartDesign_Body.svg|16px]] [[PartDesign_Body/it|Corpo]]}}.
# The {{MenuCommand|MultiTransform parameters}} [[Task_panel|task panel]] opens. See [[#Options|Options]] for more information.
</div>
# Press the {{Button|OK}} button at the top to finish.


=== Combine existing transformations ===
<div class="mw-translate-fuzzy">
# Nella struttura del modello, all'interno dell'oggetto Body attivo, selezionare la trasformazione esistente da includere.
# Cliccare sull'icona {{Button|[[Image:PartDesign_MultiTransform.svg|16px|]] Multitrasformazione}} per avviare l'operazione.
# Nella vista Elenco funzioni, si vedono le etichette delle funzioni di trasformazione esistenti incluse.<BR>Per aggiungere altre funzioni, vedere al passaggio 3 del [[PartDesign_MultiTransform/it#Metodo standard|Metodo standard]] above.
# Sotto la vista dell'elenco delle funzioni è presente la vista dell'elenco '''Trasformazioni'''. All'interno si vede l'etichetta della trasformazione esistente inclusa.
# Terminare usando passaggi 5-8 del [[PartDesign_MultiTransform/it#Metodo standard|Metodo standard]] precedente.
Quando viene avviata e completata in questo modo, la {{Button|[[Image:PartDesign_MultiTransform.svg|16px|]] Multitrasformazione}} di solito non riesce a diventare la "Punta" dell'oggetto Corpo. Per correggere questo:
# Fare clic con il tasto destro del mouse sul nuovo oggetto {{Button|[[Image:PartDesign_MultiTransform.svg|16px|]] Multitrasformazione}}.
# Scegliere "Usa come entità finale".
</div>


It is possible to create a MultiTransform object from existing [[PartDesign_Mirrored|Mirrored]], [[PartDesign_LinearPattern|LinearPattern]] and [[PartDesign_PolarPattern|PolarPattern]] transformations.
===Alternate Method 2===


# Check the {{PropertyData|Originals}} property of the existing transformations to make sure they have been applied to the same features.
<div class="mw-translate-fuzzy">
# Select those features in the [[Tree_view|Tree view]].
===Metodo alternativo 2===
# There are several ways to invoke the tool:
Questo metodo inizia con più funzioni di trasformazioni indipendenti esistenti nell'oggetto {{Button|[[Image:PartDesign_Body.svg||16px|link=PartDesign_Body/it]] [[PartDesign_Body/it|Corpo]]}} - con l'idea di combinarli. '''NOTA:''' per combinare delle trasformazioni esistenti, esse devono trovarsi all'interno dello stesso oggetto Corpo e dovrebbero usare tutte la stessa funzione o set di funzioni.
#* Press the {{Button|[[Image:PartDesign_MultiTransform.svg|16px]] [[PartDesign_MultiTransform|Create MultiTransform]]}} button.
</div>
#* Select the {{MenuCommand|Part Design → Apply a pattern → [[Image:PartDesign_MultiTransform.svg|16px]] Create MultiTransform}} option from the menu.

# The {{MenuCommand|MultiTransform parameters}} [[Task_panel|task panel]] opens.
<div class="mw-translate-fuzzy">
# Press the {{Button|OK}} button at the top.
# Nell'albero del modello, all'interno dell'oggetto Corpo attivo, selezionare una delle trasformazioni esistenti tra quelle che si desidera includere.
# Edit the {{PropertyData|Tranformations}} property of the created MultiTransform object:
# Cliccre sull'icona {{Button|[[Image:PartDesign_MultiTransform.svg|16px|]] Multitrasformazione}} per avviare l'operazione.
## Click in the field.
# Cliccare sul pulsante {{Button|OK}} per salvare e uscire.
## Press the {{Button|...}} button that appears.
# Nell'albero degli oggetti selezionare il nuovo oggetto {{Button|[[Image:PartDesign_MultiTransform.svg|16px|]] Multitrasformazione}}.
## The {{MenuCommand|Link}} dialog opens.
# Nella finestra Proprietà, individuare la proprietà "Trasformazioni" nella scheda "Dati".
## Hold down the {{KEY|Ctrl}} key and select the existing transformations.
# Modificare la proprietà '''Trasformazioni''' facendo clic sul suo valore, quindi fare clic sulla casella dell'ellisse visualizzata per aprire la finestra '''Collegamenti''' per questa proprietà.
## Press the {{Button|OK}} button.
# Selezionare tutte le trasformazioni esistenti che devono essere incluse. Selezioni multiple sono consentite usando {{KEY|Ctrl}} + clic.
# Optionally [[#Edit|edit]] the MultiTransform object, see above.
# Cliccare su {{Button|OK}} per salvare e chiudere la finestra '''Collegamenti'''.
# Cliccare sul pulsante {{Button|[[Image:Std_Refresh.svg|16px|]] [[Std_Refresh/it|Aggiorna]]}} se è attivo.
Quando viene avviata e completata in questo modo, la {{Button|[[Image:PartDesign_MultiTransform.svg|16px|]] Multitrasformazione}} potrebbe non diventare la "Punta" dell'oggetto Body. Se è necessario che sia la "Punta":
# Fare clic con il tasto destro del mouse sul nuovo oggetto {{Button|[[Image:PartDesign_MultiTransform.svg|16px|]] Multitrasformazione}}.
# Scegliere "Usa come entità finale".
</div>

===Usage Notes===

<div class="mw-translate-fuzzy">
===Note d'uso===
* Trasformazioni di funzioni supportate sono: {{Button|[[Image:PartDesign_Mirrored.svg|20px]] [[PartDesign_Mirrored/it|Specchiato]]}}, {{Button|[[Image:PartDesign_LinearPattern.svg|20px]] [[PartDesign_LinearPattern/it|Serie lineare]]}}, {{Button|[[Image:PartDesign_PolarPattern.svg|20px]] [[PartDesign_PolarPattern/it|Serie polare]]}}, e la Scalatura.
* Ogni trasformazione legata alla {{Button|[[Image:PartDesign_MultiTransform.svg|16px|]] Multitrasformazione}} deve utilizzare la stessa funzione o set di funzioni in ciascuna di esse.
</div>

===Limitations===

<div class="mw-translate-fuzzy">
===Limitazioni===

* Una trasformazione di scala non dovrebbe essere la prima della lista
* La trasformazione di scala deve avere lo stesso numero di occorrenze della trasformazione immediatamente precedente nella lista
* Vedere la funzione {{Button|[[Image:PartDesign_LinearPattern.svg|20px]] [[PartDesign_LinearPattern/it|Schiera lineare]]}} per altre limitazioni
{{clear}}
</div>


==Options==
==Options==


* To add features:
<div class="mw-translate-fuzzy">
*# Press the {{Button|Add feature}} button.
==Opzioni==
*# Select a feature in the [[Tree_view|Tree view]] or the [[3D_view|3D view]].
{|
*# Repeat to add more features.
| [[Image:Partdesign_Multitransfrom_parameters_it.png]]
* To remove features:
|
*# Press the {{Button|Remove feature}} button.
Quando si crea una operazione di MultiTrasformazione, la finestra di dialogo '''Parametri MultiTrasformazione''' mostra due elenchi in campi diversi (Originali e Trasformazioni).
*# Do one of the following:
====Selezionare gli originali====
*#* Select a feature in the [[Tree_view|Tree view]] or the [[3D_view|3D view]].
La finestra Vista combinata mostra la lista delle operazioni (oggetti) originali che devono essere trasformati. Fare clic su una operazione per aggiungerla alla lista.
*#* Select a feature in the list at the top and press the {{KEY|Del}} key.
====Selezionare le trasformazioni====
*#* Right-click a feature in the list at the top and select {{MenuCommand|Remove}} from the context menu.
In questo elenco si possono inserire delle combinazioni di trasformazioni semplici quali [[PartDesign_Mirrored/it|simmetria]], [[PartDesign_LinearPattern/it|schiera lineare]], [[PartDesign_PolarPattern/it|schiera polare]] e [[PartDesign_Scaled/it|scalatura]]. Le trasformazioni saranno applicate nell'ordine una dopo l'altra.
*# Repeat to remove more features.
Il menu di scelta rapida offre le seguenti voci:
* If there are several features in the pattern, their order can be important. See [[PartDesign_PolarPattern#Ordering_features|PartDesign PolarPattern]].
====Modifica====
* To add transformations:
Permette di modificare i parametri di una trasformazione nella lista (un doppio clic produce lo stesso effetto)
*# If there are existing transformations: select the transformation after which the new transformation should be added.
====Elimina====
*# Right-click the {{MenuCommand|Transformations}} list.
Rimuove una trasformazione dalla lista
*# Select one the following options from the context menu:
====Aggiungi trasformazione====
*#* {{MenuCommand|Add mirrored transformation}}. See [[PartDesign_Mirrored|PartDesign Mirrored]].
Aggiunge una trasformazione alla lista
*#* {{MenuCommand|Add linear pattern}}. See [[PartDesign_LinearPattern|PartDesign LinearPattern]].
====Sposta su o giù====
*#* {{MenuCommand|Add polar pattern}} See [[PartDesign_PolarPattern|PartDesign PolarPattern]].
Permette di cambiare l'ordine delle trasformazioni nella lista
*#* {{MenuCommand|Add scaled transformation}}. See [[PartDesign_Scaled|PartDesign Scaled]].
|}
*# The selected transformation is added to the list and the settings for the transformation are displayed below the list.
{{clear}}
*# Adjust the settings to suit.
</div>
*# Press the {{Button|OK}} bar at the bottom.
*# Repeat to add more transformations.
* To edit a transformation:
*# Right-click the transformation in the {{MenuCommand|Transformations}} list.
*# Select {{MenuCommand|Edit}} from the context menu.
*# Adjust the settings to suit.
*# Press the {{Button|OK}} bar at the bottom.
* To change the order of the transformations:
*# Right-click a transformation in the {{MenuCommand|Transformations}} list.
*# Select {{MenuCommand|Move up}} or {{MenuCommand|Move down}} from the context menu.
* If the {{MenuCommand|Update view}} checkbox is checked the view will update in real time.


===Select originals===
== Limitations ==


See [[PartDesign_PolarPattern#Limitations|PartDesign PolarPattern]].
The list view shows the 'originals', the features that are to be patterned. Clicking on any feature will add it to the list.

===Select transformations===

This list can be filled with a combination of the simple transformations [[PartDesign_Mirrored|mirrored]], [[PartDesign_LinearPattern|linear pattern]], [[PartDesign_PolarPattern|polar pattern]] and [[PartDesign_Scaled|scaled]]. The transformations will be applied one after the other.
The context menu offers the following entries:

====Edit====

Allows editing the parameters of a transformation in the list (double-clicking will have the same effect)

====Delete====

Removes a transformation from the list

====Add transformation====

Adds a transformation to the list

====Move Up/Down====

Allows changing the order of transformations in the list
|}

==Examples==

<div class="mw-translate-fuzzy">
==Esempi==

[[Image:mt_example2.png|c|800px]]

{{Caption|Il blocco più piccolo viene prima modellato tre volte in direzione X e poi scalato per un fattore due (in modo che alle tre occorrenze venga applicato il fattore di scala 1.0, 1.5 e 2.0). In seguito viene eseguita una schiera polare con 8 occorrenze.}}

[[Image:mt_example3.png|c|800px]]

{{Caption|Lo scavo viene prima riflesso sul piano YZ e poi si applicano due trasformazioni di schiera lineare per produrre una schiera rettangolare.}}

{{clear}}
</div>





Revision as of 14:30, 16 June 2022

MultiTrasformazione

Posizione nel menu
PartDesign → MultiTrasformazione
Ambiente
PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Descrizione

Crea una combinazioni di trasformazioni - Lo strumento Multitrasformazione utilizza una (o una serie di) funzioni come input e consente all'utente di applicare progressivamente più trasformazioni a tale funzione (o set di funzioni), in sequenza, creando una trasformazione combinata o composta.

The available transformations are: Mirrored, LinearPattern, PolarPattern and Scaled. The first three are also available as separate tools.

Flangia con doppia fila di fori. Serie di fori creati con lo strumento 'Multitrasformazione'.

Usage

Create

  1. Optionally activate the correct Body.
  2. Optionally select one or more features in the Tree view or the 3D view.
  3. There are several ways to invoke the tool:
    • Press the Create MultiTransform button.
    • Select the Part Design → Apply a pattern → Create MultiTransform option from the menu.
  4. If there is no active Body, and there are two or more Bodies in the document, the Active Body Required dialog will open and prompt you to activate one. If there is a single Body it will be activated automatically.
  5. If no features were selected the Select feature task panel opens: select one or more (hold down the Ctrl key) from the list and press the OK button.
  6. The MultiTransform parameters task panel opens. See Options for more information.
  7. Press the OK button at the top to finish.

Edit

  1. Do one of the following:
    • Double-click the MultiTransform object in the Tree view.
    • Right-click the MultiTransform object in the Tree view and select Edit MultiTransform from the context menu.
  2. The MultiTransform parameters task panel opens. See Options for more information.
  3. Press the OK button at the top to finish.

Combine existing transformations

It is possible to create a MultiTransform object from existing Mirrored, LinearPattern and PolarPattern transformations.

  1. Check the DatiOriginals property of the existing transformations to make sure they have been applied to the same features.
  2. Select those features in the Tree view.
  3. There are several ways to invoke the tool:
    • Press the Create MultiTransform button.
    • Select the Part Design → Apply a pattern → Create MultiTransform option from the menu.
  4. The MultiTransform parameters task panel opens.
  5. Press the OK button at the top.
  6. Edit the DatiTranformations property of the created MultiTransform object:
    1. Click in the field.
    2. Press the ... button that appears.
    3. The Link dialog opens.
    4. Hold down the Ctrl key and select the existing transformations.
    5. Press the OK button.
  7. Optionally edit the MultiTransform object, see above.

Options

  • To add features:
    1. Press the Add feature button.
    2. Select a feature in the Tree view or the 3D view.
    3. Repeat to add more features.
  • To remove features:
    1. Press the Remove feature button.
    2. Do one of the following:
      • Select a feature in the Tree view or the 3D view.
      • Select a feature in the list at the top and press the Del key.
      • Right-click a feature in the list at the top and select Remove from the context menu.
    3. Repeat to remove more features.
  • If there are several features in the pattern, their order can be important. See PartDesign PolarPattern.
  • To add transformations:
    1. If there are existing transformations: select the transformation after which the new transformation should be added.
    2. Right-click the Transformations list.
    3. Select one the following options from the context menu:
    4. The selected transformation is added to the list and the settings for the transformation are displayed below the list.
    5. Adjust the settings to suit.
    6. Press the OK bar at the bottom.
    7. Repeat to add more transformations.
  • To edit a transformation:
    1. Right-click the transformation in the Transformations list.
    2. Select Edit from the context menu.
    3. Adjust the settings to suit.
    4. Press the OK bar at the bottom.
  • To change the order of the transformations:
    1. Right-click a transformation in the Transformations list.
    2. Select Move up or Move down from the context menu.
  • If the Update view checkbox is checked the view will update in real time.

Limitations

See PartDesign PolarPattern.