FEM ElementFluid1D/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Docnav/ru |Shell plate thickness |Constraint electrostatic potential |FEM |IconL=F...")
 
(Created page with "{{GuiCommand/ru |Name=FEM ElementFluid1D |Name=FEM ElementFluid1D |MenuLocation=Model → Fluid section for 1D flow |Workbenches=FEM |Shortcut= |SeeAlso=[...")
Line 9: Line 9:
}}
}}


{{GuiCommand
{{GuiCommand/ru
|Name=FEM ElementFluid1D
|Name=FEM ElementFluid1D
|Name=FEM ElementFluid1D
|MenuLocation=Model → Fluid section for 1D flow
|MenuLocation=Model → Fluid section for 1D flow
|Workbenches=[[Fem Workbench|FEM]]
|Workbenches=[[Fem Workbench/ru|FEM]]
|Shortcut=
|Shortcut=
|SeeAlso=[[FEM_tutorial|FEM tutorial]]
|SeeAlso=[[FEM_tutorial/ru|FEM tutorial]]
}}
}}



Revision as of 20:51, 21 November 2020

FEM ElementFluid1D

Системное название
FEM ElementFluid1D
Расположение в меню
Model → Fluid section for 1D flow
Верстаки
FEM
Быстрые клавиши
Нет
Представлено в версии
-
См. также
FEM tutorial

Description

Creates a FEM fluid section element for pneumatic and hydraulic networks

Usage

  1. Click on or choose Model Fluid section for 1D flow from the top menu.
  2. Select Fluid type: Liquid, Gas or Open Channel
  3. Select Section type: Pipe Manning, Pipe Inlet etc.
  4. Enter Section type parameters.
  5. Select and add edge.

Limitations

  1. The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html

Notes

  1. An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
  2. The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html