Taslak Çokgen
Çokgen |
Menü konumu |
---|
Taslak → Çokgen |
Tezgahlar |
Taslak, Mimari |
Varsayılan kısayol |
P G |
Versiyonda tanıtıldı |
0.17 |
Ayrıca bkz |
Çember |
Açıklama
Çokgen aracı, merkez ve bir yarıçap tanımlayan ikinci bir nokta alarak iki nokta seçerek düzenli bir çokgen oluşturur. Görevler sekmesinde önceden ayarlanmış olan Çizgi stili alır.
Nasıl kullanılır
- Çokgen düğmesine basın veya P ve ardından G tuşlarına basın
- 3D görünümünde bir ilk noktaya tıklayın veya bir Koordinat yazın
- Seçenekler iletişim kutusunda istediğiniz kenar sayısını ayarlayın,
- 3D görünümünde başka bir noktaya tıklayın veya poligon yarıçapını tanımlamak için bir yarıçap değeri yazın. Çokgen, tel kafes gibi görünse bile bir yüz olacaktır.
The polygon can be edited by double clicking on the element in the tree view, or by pressing the Draft Edit button. Then you can move the center and radius points to a new position.
The polygon is created inscribed in a circle of the specified radius; it can be switched to circumscribed after creation by changing its draw mode property.
The number of sides of the polygon can also be changed after creation by changing its faces number property.
Seçenekler
- Koordinatları elle girmek için sayıları girin, ardından her bir X, Y ve Z bileşeni arasında ENTER tuşuna basın.
- T tuşuna basınız veya Devam et düğmesini işaretlemek/işaretini kaldırmak için onay kutusuna tıklayınız. Devam modu açıksa, Çokgen aracı, bitirdikten veya kapattıktan sonra yeniden başlatılır ve Çokgen düğmesine tekrar basmadan başka bir tane çizmenize olanak verir.
- snapping noktasını mesafeden bağımsız olarak, noktanızı en yakın anlık konuma zorlamak için çizim yaparken CTRL tuşuna basın.
- Bir sonraki noktanızı yatay veya dikey olarak son noktaya göre constrain çizerken SHIFT tuşuna basın.
- Çokgen kapatıldıktan sonra bir yüzle dolu olması için I veya Dolu düğmesine basın
- Geçerli komutu iptal etmek için ESC veya İptal düğmesine basın.
- Çokgenler, "Düz Çizgiler" görüntüleme modundayken, aşağıdaki "Desen" özelliklerini ayarlayarak bir tarama modeli görüntüleyebilir.
Özellikleri
- VERİRadius: Tanımlayan çemberin yarıçapı
- VERİDraw Mode: Çokgenin tanımlayıcı çemberin etrafına mı yazıldığını veya sınırlandırıldığını belirtir.
- VERİFaces Number: Çokgenin kenarlarının sayısı
- VERİChamfer Size: Yivli köşelerin boyutunu belirtir
- VERİFillet Radius: Dikdörtgenin köşelerine verilecek eğrilik yarıçapını belirtir
- VERİMake Face: Çokgeni bir yüzle doldurur
- GÖRÜNÜMPattern: Teli doldurmak için bir tarama deseni belirtir.
- GÖRÜNÜMPattern Size: Tarama deseninin boyutunu belirtir
Data
- VeriRadius: specifies the radius of the circle that defines the polygon.
- VeriDraw Mode: specifies if the polygon is inscribed in a circle, or circumscribed around a circle.
- VeriFaces Number: specifies the number of sides of the polygon.
- VeriChamfer Size: specifies the size of the chamfers (straight segments) created on the corners of the polygon.
- VeriFillet Radius: specifies the radius of the fillets (arc segments) created on the corners of the polygon.
- VeriMake Face: specifies if the shape makes a face or not. If it is
true
a face is created, otherwise only the perimeter is considered part of the object.
View
- GörünümPattern: specifies a Draft Pattern with which to fill the face of the polygon. This property only works if VeriMake Face is
true
, and if GörünümDisplay Mode is "Flat Lines". - GörünümPattern Size: specifies the size of the Draft Pattern.
Betik
Çokgen aracı, aşağıdaki işlevi kullanarak makrolar ve python konsolundan kullanılabilir:
The Polygon tool can be used in macros and from the Python console by using the following function:
Polygon = makePolygon(nfaces, radius=1, inscribed=True, placement=None, face=None, support=None)
- Belirtilen yüz sayısı ve yarıçapı ile çokgen bir nesne oluşturur.
- inscribed False ise, çokgen verilen yarıçapı olan bir dairenin etrafına çevrilir, aksi takdirde inscribed edilir.
- face True ise, elde edilen şekil bir yüz olarak, aksi takdirde bir tel kafes olarak görüntülenir.
- Yeni oluşturulan nesneyi döndürür.
Örnek:
import FreeCAD, Draft
Polygon1 = Draft.makePolygon(4, radius=500)
Polygon2 = Draft.makePolygon(5, radius=750)
ZAxis = FreeCAD.Vector(0, 0, 1)
p3 = FreeCAD.Vector(1000, 1000, 0)
place3 = FreeCAD.Placement(p3, FreeCAD.Rotation(ZAxis, 90))
Polygon3 = Draft.makePolygon(6, radius=1450, placement=place3)
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub