Draft: Tratteggio
Tratteggio |
Posizione nel menu |
---|
Drafting → Tratteggio |
Ambiente |
Draft, Arch |
Avvio veloce |
H A |
Introdotto nella versione |
0.20 |
Vedere anche |
Campitura |
Descrizione
Il comando Tratteggio crea dei tratteggi sulle facce piane di un oggetto selezionato.
Utilizzo
- Selezionare un oggetto con facce. Verranno tratteggiate solo le facce piane dell'oggetto.
- Esistono diversi modi per invocare il comando:
- Premere il pulsante Tratteggio.
- Selezionare l'opzione Drafting → Tratteggio dal menu.
- Usare la scorciatoia da tastiera: H poi A.
- Si apre il pannello attività Tratteggio. Vedere Opzioni per maggiori informazioni.
- Premere il pulsante OK per terminare il comando.
Opzioni
- Premere il pulsante ... per selezionare un file PAT. Vedere Note.
- Selezionare un Motivo dal file. Attualmente è consigliabile evitare modelli con linee tratteggiate.
- Specificare un Scala per il modello.
- Specificare un Rotazione per il modello.
- Premere Esc o il pulsante Annulla per interrompere il comando.
Allineamento modello
Quando viene calcolato il modello di tratteggio per una faccia, viene temporaneamente tradotto nel piano XY globale per impostazione predefinita. Per una faccia con bordo dritto, il primo bordo dritto determina come ciò avvenga. Il primo punto di quel bordo viene posizionato sull'origine e il bordo stesso viene allineato con l'asse X. Se vengono create Polilinee con questo presupposto, si può controllare come il modello di tratteggio verrà allineato con il contorno della faccia.
Se tutte le facce dell'oggetto selezionate si trovano sul piano XY globale, si può disattivare questo comportamento predefinito impostando la proprietà DatiTranslate del Tratteggio su false
. Il modello di tratteggio verrà quindi allineato con l'origine e l'asse X del sistema di coordinate globale. Per le facce sul piano XY con spigoli dritti, la proprietà DatiTranslate può essere utilizzata per alternare tra modelli assoluti (a sinistra nell'immagine) e relativi (a destra nell'immagine).
Due Polilinee con Tratteggio.
Le Polilinee sono state create in senso antiorario partendo dal punto in basso a sinistra.
Per il tratteggio a sinistra, la proprietà Translate è impostata su false.
Per il tratteggio sulla destra è impostato su true.
Note
- For now the advice is to download a PAT file. Many can be found online. You can for example do a web search for acad.pat or acadiso.pat.
- A small PAT file is installed with FreeCAD: <program_folder>/data/Mod/TechDraw/PAT/FCPAT.pat, where <program_folder> is the FreeCAD program folder:
- On Linux it is usually /usr/share/freecad.
- On Windows it is usually C:\Program Files\FreeCAD.
- On macOS it is usually /Applications/FreeCAD.
Preferences
See also: Preferences Editor and Draft Preferences.
The following preferences are involved:
- PAT file: Tools → Edit parameters... → BaseApp → Preferences → Mod → TechDraw → PAT → FilePattern.
- Pattern: Tools → Edit parameters... → BaseApp → Preferences → Mod → TechDraw → PAT → NamePattern.
- Scale: Tools → Edit parameters... → BaseApp → Preferences → Mod → Draft → HatchPatternScale.
- Rotation: Tools → Edit parameters... → BaseApp → Preferences → Mod → Draft → HatchPatternRotation.
Properties
See also: Property editor.
A Draft Hatch object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Data
Hatch
- DatiBase (
Link
): specifies the object whose faces are hatched. - DatiFile (
File
): specifies the PAT file. - DatiPattern (
String
): specifies the pattern name. - DatiRotation (
Angle
): specifies the rotation of the pattern. - DatiScale (
Float
): specifies the scale of the pattern. - DatiTranslate (
Bool
): specifies if the faces are temporarily translated to the global XY plane during the hatching process. Setting it tofalse
may give wrong results for non-XY faces.
Scripting
See also: Autogenerated API documentation and FreeCAD Scripting Basics.
To create a Draft Hatch use the make_hatch
method of the Draft module.
hatch = make_hatch(baseobject, filename, pattern, scale, rotation)
Example:
import FreeCAD as App
import Draft
doc = App.newDocument()
rectangle = Draft.make_rectangle(4000, 1000)
rectangle.MakeFace = True
filename = App.getHomePath() + "data/Mod/TechDraw/PAT/FCPAT.pat"
pattern = "Horizontal5"
hatch = Draft.make_hatch(rectangle, filename, pattern, scale=50, rotation=45)
doc.recompute()
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub