Draft Dimension/tr: Difference between revisions

From FreeCAD Documentation
(Created page with "== Kullanılabilir boyut tipleri == * '''Doğrusal boyutlar''': {{KEY | ALT}} tuşuna basarak herhangi bir 2 nokta veya düz bir kenar seçerek. * '''Yatay/dikey boyutlar''':...")
(Updating to match new version of source page)
 
(61 intermediate revisions by 4 users not shown)
Line 1: Line 1:
<languages/>
<languages/>
{{GuiCommand/tr|Name=Draft Dimension|Name/tr=Boyut|Workbenches=[[Draft Module/tr|Taslak]], [[Arch Module/tr|Yapı]]|MenuLocation=Taslak → Boyut|Shortcut=D I|SeeAlso=[[Draft FlipDimension/tr|FlipDimension]]}}


{{Docnav
== Açıklama ==
|[[Draft_Text|Text]]
Boyut aracı, geçerli belgede, ölçülecek mesafeyi tanımlayan iki nokta ve boyut çizgisinin geçtiği yeri belirten üçüncü bir nokta olan bir boyut oluşturur.
|[[Draft_Label|Label]]
|[[Draft_Workbench|Draft]]
|IconL=Draft_Text.svg
|IconR=Draft_Label.svg
|IconC=Workbench_Draft.svg
}}

<div class="mw-translate-fuzzy">
{{GuiCommand/tr
|Name=Draft Dimension
|Name/tr=Boyut
|MenuLocation=Taslak → Boyut
|Workbenches=[[Draft_Workbench/tr|Taslak]], [[Arch_Workbench/tr|Mimari]]
|Shortcut={{KEY|D}} {{KEY|I}}
|Version=0.18
|SeeAlso=[[Draft FlipDimension/tr|FlipDimension]],[[TechDraw Workbench/tr|Teknik resim]]
}}
</div>

==Description==

<div class="mw-translate-fuzzy">
== Açıklama ==
Boyut aracı, iki nokta arasındaki mesafeyi ölçen ve görüntüleyen bir nesne oluşturur; üçüncü bir nokta, boyut çizgisinin konumunu belirtir.
</div>

<div class="mw-translate-fuzzy">
Araç, doğrudan katı gövdelere tutturulmuş kenarları veya çizgileri ölçebilir; Gövde değişirse, boyut kendini günceller. Araç ayrıca [[Draft Arc/tr|Yay]] veya [[Part Fillet/tr|Doldur]], [[Sketcher CreateFillet/tr|Eskiz Dolgu oluştur]] ve [[PartDesign Fillet/tr|Prça tasarım Dolgu]] işlemleri ile üretilenler gibi eğrilik çapını veya yarıçapını da ölçebilir.
</div>

<div class="mw-translate-fuzzy">
Ortaya çıkan boyut 3D görünümüne yerleştirilir ve bir Taslak nesnesi olarak kabul edilir. Bu nesne, [[TechDraw_DraftView/tr|Teknik resim Yeni Eskiz]] veya [[TechDraw_ArchView/tr|Teknik resim Yeni Yay]] araçlarını kullanarak [[TechDraw Workbench/tr|Teknik resim tezgahı]] sayfasında görüntülenebilir. Bu araçlar teknik çizimler hazırlamak içindir, bu yüzden boyutları 3D çizimde değil, sadece çizim sayfasında oluştururlar.
</div>


[[Image:Screenshot_Draft_Dimension.jpg|400px]]
[[Image:Screenshot_Draft_Dimension.jpg|400px]]
<div class="mw-translate-fuzzy">
{{Caption | Üç nokta tarafından tanımlanan boyut}}
</div>


== Nasıl kullanılır ==
== Create ==
# {{KEY | [[Image: Draft Dimension.png | 16px]] [[Draft Dimension/tr|Boyut]]}} düğmesine basın veya {{KEY | D}} ardından {{KEY | I}} tuşlarına basın
# 3D görünümünde bir noktaya tıklayın veya bir [[Draft_Coordinates/tr|Koordinat]] yazın
# 3D görünümünde ikinci bir noktaya tıklayın veya bir [[Draft_Coordinates/tr|Koordinat]] yazın
# 3D görünümünde üçüncü bir noktayı tıklayın veya bir [[Draft_Coordinates/tr | Koordinat]] yazın


See also: [[Draft_Tray|Draft Tray]], [[Draft_Snap|Draft Snap]] and [[Draft_Constrain|Draft Constrain]].
== Kullanılabilir boyut tipleri ==
* '''Doğrusal boyutlar''': {{KEY | ALT}} tuşuna basarak herhangi bir 2 nokta veya düz bir kenar seçerek.
* '''Yatay/dikey boyutlar''': ikinci nokta seçiliyken {{KEY | SHIFT}} tuşuna basarak.
* '''Çap boyutları''': {{KEY | ALT}} tuşuna basarak eğri bir kenar seçerek.
* '''Yarıçap boyutları''': {{KEY | ALT}} tuşunu kullanarak eğri bir kenar seçerek, ardından {{KEY | SHIFT}} tuşuna basın.
* '''Açısal boyutlar''': {{KEY | ALT}} tuşuna basarak 2 düz kenar seçerek.


=== Usage linear dimension ===
==Options==
* Press {{KEY|X}}, {{KEY|Y}} or {{KEY|Z}} after a point to constrain the next point on the given axis.
* To enter coordinates manually, simply enter the numbers, then press {{KEY|ENTER}} between each X, Y and Z component.
* Press {{KEY|CTRL}} while drawing to force [[Draft_Snap|snapping]] your point to the nearest snap location, independently of the distance.
* Pressing {{KEY|SHIFT}} will [[Draft_Constrain|constrain]] the dimension horizontally or vertically, or, when working on a circular edge, switches between diameter and radius modes.
* Press {{KEY|R}} or click the checkbox to check/uncheck the {{KEY|'''Relative'''}} button. If relative mode is on, the coordinates of the next point are relative to the last one. If not, they are absolute, taken from the (0,0,0) origin point.
* Press {{KEY|T}} or click the checkbox to check/uncheck the {{KEY|'''Continue'''}} button. If continue mode is on, you will be able to draw continued dimensions, one after the other, that share the same baseline.
* Press {{KEY|ESC}} or the {{KEY|'''Cancel'''}} button to abort the current Line command.
* By picking an existing edge with {{KEY|ALT}}, instead of entering measurement points, the dimension will become '''parametric''' and remember which edge it is bound to. If the endpoints of that edge move later on, the dimension will follow them.
* If an edge is selected before starting the Dimension command, the created dimension will also be '''parametric'''.
* The direction of the dimension can be changed afterwards, by modifying its "Direction" property


<div class="mw-translate-fuzzy">
==Properties==
== Nasıl kullanılır ==
* {{PropertyData|Start}}: The start point of the distance to measure
# {{Button | [[Image: Draft Dimension.png | 16px]] Taslak Boyut}} düğmesine basın veya {{KEY | D}} ardından {{KEY | I}} tuşları.
* {{PropertyData|End}}: The end point of the distance to measure
# 3D görünümünde bir noktaya tıklayın veya bir koordinat yazın ve {{Button | [[Image: Draft_AddPoint.svg | 16px]] Nokta ekle}} düğmesine basın.
* {{PropertyData|Dimline}}: A point through which the dimension line must pass
# 3D görünümünde ikinci bir noktaya tıklayın veya bir koordinat yazın ve {{Button | [[Image: Draft_AddPoint.svg | 16px]] Nokta ekle}} düğmesine basın. İlk iki nokta ölçülen mesafeyi tanımlar.
* {{PropertyView|Display Mode}}: Specifies if the text is aligned to the dimension lines or always faces the camera
# 3D görünümünde üçte birini tıklayın veya bir koordinat yazın ve {{Button | [[Image: Draft_AddPoint.svg | 16px]] |Nokta ekle}} düğmesine basın. Son nokta, ölçüm çizgisinin konumunu tanımlar.
* {{PropertyView|Font Size}}: The size of the letters
</div>
* {{PropertyView|Ext Lines}}: The size of the extension lines (between the measurement points and the dimension line)

* {{PropertyView|Text Position}}: Can be used to force the text to be displayed at a certain position
=== Usage radial dimension ===
* {{PropertyView|Text Spacing}}: Specifies the space between the text and the dimension line

* {{PropertyView|Override}}: Specifies a text to display instead of the measurement. Insert "$dim", inside that text, to display the measurement value
# Optionally select a circular edge in the [[3D_view|3D view]].
* {{PropertyView|Font Name}}: The font to use to draw the text. It can be a font name, such as "Arial", a default style such as "sans", "serif" or "mono", or a family such as "Arial,Helvetica,sans" or a name with a style such as "Arial:Bold". If the given font is not found on the system, a generic one is used instead.
# There are several ways to invoke the command:
* {{PropertyView|Arrow Type}}: The type of arrow to use
#* Press the {{Button|[[Image:Draft_Dimension.svg|16px]] [[Draft_Dimension|Draft Dimension]]}} button.
* {{PropertyView|Arrow Size}}: The size of the arrows
#* Select the {{MenuCommand|Annotation → [[Image:Draft_Dimension.svg|16px]] Dimension}} option from the menu.
* {{PropertyView|Decimals}}: The number of decimal places to display on the dimension
#* Use the keyboard shortcut: {{KEY|D}} then {{KEY|I}}.
* {{PropertyView|Flip Arrows}}: Reverse the orientation of arrows
# The {{MenuCommand|Dimension}} task panel opens. See [[#Options|Options]] for more information.
* {{PropertyView|Unit Override}}: Expresses the distance in the given unit (leave blank to use the system unit) {{Version|0.17}}
# If you have not yet selected an edge do one of the following:
#* Press {{KEY|E}} or the {{Button|[[Image:view-select.svg|16px]] Select edge}} button and select a circular edge in the [[3D_view|3D view]].
#* Hold down the {{KEY|Alt}} key, select a circular edge in the [[3D_view|3D view]] and release the {{KEY|Alt}} key.
# To position the dimension line do one of the following:
#* For a diameter dimension:
#** Pick a point in the [[3D_view|3D view]], or type coordinates and press the {{Button|[[Image:Draft_AddPoint.svg|16px]] Enter point}} button.
#* For a radial dimension:
#** Hold down the {{KEY|Shift}} key and pick a point in the [[3D_view|3D view]].

=== Usage angular dimension ===

# There are several ways to invoke the command:
#* Press the {{Button|[[Image:Draft_Dimension.svg|16px]] [[Draft_Dimension|Draft Dimension]]}} button.
#* Select the {{MenuCommand|Annotation → [[Image:Draft_Dimension.svg|16px]] Dimension}} option from the menu.
#* Use the keyboard shortcut: {{KEY|D}} then {{KEY|I}}.
# The {{MenuCommand|Dimension}} task panel opens. See [[#Options|Options]] for more information.
# Do one of the following:
#* Press {{KEY|E}} or the {{Button|[[Image:view-select.svg|16px]] Select edge}} button and select a first straight edge in the [[3D_view|3D view]]. Repeat this to select a second straight edge.
#* Hold down the {{KEY|Alt}} key, select two straight edges in the [[3D_view|3D view]] and release the {{KEY|Alt}} key.
# To position the dimension arc pick a point in the [[3D_view|3D view]].
# The displayed angle depends on the edges and the picked point.

=== Options ===

The single character keyboard shortcuts available in the task panel can be changed. See [[Draft_Preferences|Draft Preferences]]. The shortcuts mentioned here are the default shortcuts (for version 0.22).

<div class="mw-translate-fuzzy">
== Seçenekler ==
* Verilen eksendeki bir sonraki noktayı sınırlamak için bir noktadan sonra {{KEY | X}}, {{KEY | Y}} veya {{KEY | Z}} tuşlarına basın.
* Koordinatları manuel olarak girmek için sayıları girin, ardından her bir X, Y ve Z bileşeni arasında {{KEY | Enter}} tuşuna basın. Noktayı yerleştirmek istediğiniz değerleri aldığınızda {{Button | [[Image: Draft_AddPoint.svg | 16px]] Nokta ekle}} düğmesine basabilirsiniz.
* '''Göreceli''' moduna geçmek için {{KEY | R}} tuşuna basın veya onay kutusunu tıklayın. Göreceli mod açıksa, bir sonraki noktanın koordinatları bir öncekine göredir; değilse, kesindir, Eksenden alınır (0,0,0).
* '''Devam''' moduna geçmek için {{KEY | T}} tuşuna basın veya onay kutusunu tıklayın. Devam modu açıksa, son noktayı verdikten sonra Boyut aracı yeniden başlatılır ve araç düğmesine tekrar basmadan başka bir boyut çizmenize izin verilir; Aşağıdaki boyutlar önceki boyutun son noktasından başlayacak ve aynı temel çizgiyi paylaşacaktır.
* [[Draft_Snap/tr | Yakalama]] noktanızı mesafeden bağımsız olarak, en yakın çeki konumuna yönlendirmek için çizim yaparken {{KEY | Ctrl}} tuşunu basılı tutun.
* Bir önceki noktaya göre [[Draft_Constrain/tr | Kısıtlama]] bir sonraki noktanızı yatay veya dikey olarak çizerken ve çap ve yarıçap modları arasında geçiş yapmak için {{KEY | Shift}} tuşunu basılı tutun.
* Geçerli komutu iptal etmek için {{KEY | Esc}} veya {{Button | Close}} düğmesine basın ve '''devam''' boyutlarını bitirin; önceden yerleştirilmiş boyutlar kalacaktır.
</div>

== Convert ==

=== Usage ===

# Select one or more [[Std_MeasureDistance|Std MeasureDistance]] objects.
# There are several ways to invoke the command:
#* Press the {{Button|[[Image:Draft_Dimension.svg|16px]] [[Draft_Dimension|Draft Dimension]]}} button.
#* Select the {{MenuCommand|Annotation → [[Image:Draft_Dimension.svg|16px]] Dimension}} option from the menu.
#* Use the keyboard shortcut: {{KEY|D}} then {{KEY|I}}.
# Each selected object is replaced by a non-parametric linear Draft Dimension.

==Notes==

<div class="mw-translate-fuzzy">
Boyut, ağaç görünümündeki öğeye çift tıklayarak veya {{Button | [[Image: Draft Edit.svg | 16px]] [[Draft Edit/tr|Taslak Düzenle]]}} düğmesine basarak düzenlenebilir. Ardından noktaları yeni bir konuma getirebilirsiniz.
</div>

<span id="Properties"></span>
== Özellikler ==

See also: [[Property_editor|Property editor]].

A Draft Dimension object is derived from an [[App_FeaturePython|App FeaturePython]] object and inherits all its properties. The following properties are additional unless otherwise stated:

=== Data linear and radial dimension ===

{{TitleProperty|Dimension}}

<div class="mw-translate-fuzzy">
=== Veri ===
* {{PropertyData | Start}}: ölçülecek mesafenin başlangıç noktasını belirtir.
* {{PropertyData | End}}: ölçülecek mesafenin bitiş noktasını belirtir.
* {{PropertyData | Dimline}}: boyut çizgisinin geçmesi gereken bir noktayı belirtir.
* {{PropertyData | Distance}}: (salt okunur) ölçülen uzunluğu belirtir.
* {{PropertyData | Diameter}}: {{TRUE}} ise, bir çap boyutu görüntüler; aksi takdirde bir yarıçap boyutu görüntüler; Bu özellik yalnızca boyut dairesel bir yaya bağlıysa çalışır.
</div>

{{TitleProperty|Linear/radial dimension}}

* {{PropertyData|Direction|Vector}}: specifies the direction of the measurement.
* {{PropertyData|Distance|Length}}: (read-only) specifies the value of the measurement.
* {{PropertyData|End|VectorDistance}}: specifies the end point of the measurement.
* {{PropertyData|Start|VectorDistance}}: specifies the start point of the measurement.

{{TitleProperty|Radial dimension}}

* {{PropertyData|Diameter|Bool}}: specifies if a radial dimension is displayed as a diameter dimension. Not used for linear dimensions.

=== Data angular dimension ===

{{TitleProperty|Angular dimension}}

* {{PropertyData|Angle|Angle}}: (read-only) specifies the value of the measurement.
* {{PropertyData|Center|VectorDistance}}: specifies the center of the measurement.
* {{PropertyData|First Angle|Angle}}: specifies the start angle of the measurement.
* {{PropertyData|Last Angle|Angle}}: specifies the end angle of the measurement.

{{TitleProperty|Dimension}}

* {{PropertyData|Dimline|VectorDistance}}: specifies the point through which the dimension arc passes.
* {{PropertyData|Linked Geometry|LinkSubList|hidden}}: not used.
* {{PropertyData|Normal|Vector|hidden}}: specifies the normal of the plane of the dimension.
* {{PropertyData|Support|Link|hidden}}: not used.

=== View ===

{{TitleProperty|Annotation}}

* {{PropertyView|Annotation Style|Enumeration}}: specifies the annotation style applied to the dimension. See [[Draft_AnnotationStyleEditor|Draft AnnotationStyleEditor]].
* {{PropertyView|Scale Multiplier|Float}}: specifies the general scaling factor applied to the dimension.

{{TitleProperty|Display Options}}

* {{PropertyView|Display Mode|Enumeration}}: specifies how the text is displayed. If it is {{value|World}} the text will be displayed on a plane defined by the {{PropertyData|Normal}} of the measurement. If it is {{value|Screen}} the text will always face the screen. This is an inherited property. The mentioned options are the renamed options ({{Version|0.21}}).

{{TitleProperty|Graphics}}

<div class="mw-translate-fuzzy">
=== Görünüm ===
* {{PropertyView | Ext Lines}}: Ölçüm noktalarından boyut çizgisine giden uzatma hatlarının maksimum uzunluğunu belirtir.
* {{PropertyView | Ext Overshoot}}: uzantı çizgilerinin boyut çizgisinin ötesindeki ek uzunluğunu belirtir.
* {{PropertyView | Dim Overshoot}}: boyut çizgisine eklenen ilave uzunluğu belirtir.
* {{PropertyView | Arrow Size}}: boyut çizgisinin sonunda görüntülenen sembolün boyutunu belirtir.
* {{PropertyView | Arrow Type}}: "Çizgi", "Daire", "Ok" veya "Tik" olabilen, boyut çizgisinin sonunda görüntülenen sembolün türünü belirtir.
* {{PropertyView | Flip Arrows}}: sembollerin boyut çizgisinin uçlarında çevrilip çevrilmeyeceğini belirtir; sadece bu semboller ok ise işe yarar.
* {{PropertyView | Font Name}}: metni çizmek için kullanılacak fontu belirtir. "Arial" gibi bir font adı, "sans", "serif" veya "mono" gibi bir varsayılan stil, "Arial, Helvetica, sans" gibi bir aile veya "gibi bir stil içeren bir ad olabilir. Arial: "Kalın. Belirtilen font sistemde bulunmuyorsa, bunun yerine genel olan kullanılır.
* {{PropertyView | Font Size}}: harflerin boyutunu belirtir. Boyut nesnesi ağaç görünümünde oluşturulmuşsa ancak metin görünmüyorsa, görünene kadar metnin boyutunu artırın.
* {{PropertyView | Flip Text}}: ölçümü gösteren metnin yönünün çevrilip çevrilmeyeceğini belirtir.
* {{PropertyView | Text Position}}: orijine (0,0,0) atıfta bulunulan metnin mutlak koordinatlardaki konumunu belirtir; metni boyut çizgisinin yanında görüntülemek için bu özelliği varsayılan değerinde (0,0,0) bırakın.
* {{PropertyView | Text Spacing}}: Metin ve boyut çizgisi arasındaki boşluğu belirtir.
* {{PropertyView | Override}}: gerçek ölçüm yerine görüntülenecek özel bir metin belirtir. Ölçüm değerini görüntülemek için metnin içindeki {{incode | $ dim}} dizesini kullanın.
* {{PropertyView | Decimals}}: ölçümde görüntülenecek ondalık basamak sayısını belirtir.
* {{PropertyView | Show Unit}}: {{TRUE}} ise, birim ölçümün sayısal değerinin yanında görüntülenir.
* {{PropertyView | Unit Override}}: ölçümü "örneğin" km "," m "," cm "," mm "," mi "," ft "," in "olarak ifade edeceği bir birim belirtir. ; varsayılan birimleri kullanmak için bu özelliği boş bırakın. {{Version/tr | 0.17}}
</div>

{{TitleProperty|Text}}

* {{PropertyView|Flip Text|Bool}}: specifies whether to flip the orientation of the text.
* {{PropertyView|Font Name|Font}}: specifies the font used to draw the text. It can be a font name, such as {{value|Arial}}, a default style such as {{value|sans}}, {{value|serif}} or {{value|mono}}, a family such as {{value|Arial,Helvetica,sans}}, or a name with a style such as {{value|Arial:Bold}}. If the given font is not found on the system, a default font is used instead.
* {{PropertyView|Font Size|Length}}: specifies the size of the letters. The text can be invisible in the [[3D_view|3D view]] if this value is very small.
* {{PropertyView|Override|String}}: specifies a custom text to display instead of the actual measurement. Use the string {{value|$dim}} inside the text to include the measurement.
* {{PropertyView|Text Color|Color}}: specifies the color of the text. {{Version|0.21}}
* {{PropertyView|Text Position|VectorDistance}}: specifies the position of the text in absolute coordinates. {{Value|[0, 0, 0]}} will display the text in its default position near the dimension line or arc.
* {{PropertyView|Text Spacing|Length}}: specifies the space between the text and the dimension line or arc.

{{TitleProperty|Units}}

* {{PropertyView|Decimals|Integer}}: specifies the number of decimal places to display for the measurement.
* {{PropertyView|Show Unit|Bool}}: specifies whether to display the unit next to the numerical value of the measurement. Not used for angular dimensions.
* {{PropertyView|Unit Override|String}}: specifies the unit in which to express the measurement, for example, {{value|km}}, {{value|m}}, {{value|cm}}, {{value|mm}}, {{value|mi}}, {{value|ft}}, {{value|in}} or {{value|arch}} for arch units. Leave this blank to use the default unit. Not used for angular dimensions.


==Scripting==
==Scripting==

The Dimension tool can by used in [[macros]] and from the python console by using the following functions:
<div class="mw-translate-fuzzy">
== Betik ==
{{Emphasis|Ayrıca bkz.:}} [[Draft API/tr|Taslak API]] ve [[FreeCAD Scripting Basics/tr|FreeCAD Betik esasları]].
</div>

<div class="mw-translate-fuzzy">
Boyut aracı, aşağıdaki işlevi kullanarak [[macros/tr|makrolar]] ve [[Python/tr|Python]] konsolundan kullanılabilir:
</div>

{{Code|code=
{{Code|code=
dimension = make_dimension(p1, p2, p3=None, p4=None)}}
makeDimension (p1,p2,[p3])

}}
<div class="mw-translate-fuzzy">
or
Kendisine iletilen argümanlara bağlı olarak, bu işlevi çağırmanın çeşitli yolları vardır:
</div>

{{Code|code=
{{Code|code=
dimension = make_dimension(p1, p2, p3=None)
makeDimension (object,i1,i2,p3)
dimension = make_dimension(object, i1, i2, p4=None)
dimension = make_dimension(object, i1, mode, p4=None)
}}
}}

or
<div class="mw-translate-fuzzy">
* {{incode | p1}} ve {{incode | p2}} noktaları arasındaki mesafeyi ölçerek doğrusal bir {{incode | Dimension}} oluşturur.
* {{incode | object}} 'a bağlı, {{incode | i1}} ve {{incode | i2}} endeksli köşeleri arasındaki mesafeyi ölçen doğrusal bir {{incode | Dimension}} oluşturur.
* {{incode | object}} 'a bağlı, {{incode | i1}}, ölçülecek eğri kenarının dizini ve {{incode | mode}} ya { Boyut türünü belirtmek için {incode | "radius"}} veya {{incode | "çap"}}.
** İlk aramada {{incode | p3}} ve diğer ikisinde de {{incode | p4}}, boyut çizgisinin geçmesi gereken isteğe bağlı bir nokta belirtin.
** Tüm noktalar {{incode | FreeCAD.Vector}} ile tanımlanır.
</div>

<div class="mw-translate-fuzzy">
Açısal bir boyut oluşturmak için aşağıdaki işlevi kullanın:
</div>

{{Code|code=
{{Code|code=
dimension = make_angular_dimension(center, angles, p3, normal=None)
makeDimension (objlist,indices,p3)
dimension = make_angular_dimension(center, [angle1, angle2], p3, normal=None)
}}
}}
* Creates a Dimension object with the dimension line passing through p3.
* The Dimension object takes the [[Draft Linestyle|Draft linewidth and color]] set in the command bar.
* There are multiple ways to create a dimension, depending on the arguments you pass to it:
# (p1,p2,p3): creates a standard dimension from p1 to p2.
# (object,i1,i2,p3): creates a linked dimension to the given object, measuring the distance between its vertices indexed i1 and i2.
# (object,i1,mode,p3): creates a linked dimension to the given object, i1 is the index of the (curved) edge to measure, and mode is either "radius" or "diameter". Returns the newly created object.
{{Code|code=
makeAngularDimension (center,[angle1,angle2],p3)
}}
* creates an angular Dimension from the given center, with the given list of angles, passing through p3.
* Returns the newly created object.


<div class="mw-translate-fuzzy">
Example:
* Verilen {{incode | center}} noktasından, iki öğeli {{incode | angles}} listesinden ve arkasından gelen {{incode | p3}} noktasından açısal bir {{incode | Dimension}} oluşturur. gitmelisin.
** Eğer {{incode | angle1> angle2}} ise, görüntülenen açı {{incode | angle1 - angle2}} farkıdır; Aksi halde, ek açı gösterilir {{incode | 360 - (angle2 - angle1)}}.
** Açıları radyan cinsinden verilmelidir; {{incode | math.radians ()}} işlevi, derece olarak verilen açıları dönüştürmek için kullanılabilir.
</div>

<div class="mw-translate-fuzzy">
{{incode | Dimension}} görünüm özellikleri niteliklerinin üzerine yazılarak değiştirilebilir; örneğin, {{incode | ViewObject.FontSize}} üzerine, yeni boyutun milimetre cinsinden üzerine yazın.
</div>

Örnek:

{{Code|code=
{{Code|code=
import FreeCAD,Draft
import FreeCAD as App
import Draft
p1 = FreeCAD.Vector(0,0,0)

p2 = FreeCAD.Vector(1,1,0)
doc = App.newDocument()
p3 = FreeCAD.Vector(2,0,0)

Draft.makeDimension(p1,p2,p3)
p1 = App.Vector(0, 0, 0)
p2 = App.Vector(1000, 1000, 0)
p3 = App.Vector(-2500, 0, 0)
dimension1 = Draft.make_dimension(p1, p2, p3)
dimension1.ViewObject.FontSize = 200

polygon = Draft.make_polygon(3, radius=1000)
doc.recompute()

p4 = App.Vector(-2000, 1500, 0)
dimension2 = Draft.make_dimension(polygon, 1, 2, p4)
dimension2.ViewObject.FontSize = 200

center = App.Vector(2000, 0, 0)
p5 = App.Vector(3000, 1000, 0)
angle1 = 45
angle2 = 10
dimension3 = Draft.make_angular_dimension(center, [angle1, angle2], p5)
dimension3.ViewObject.FontSize = 200

dimension4 = Draft.make_angular_dimension(center, [angle2, angle1], p5*1.2)
dimension4.ViewObject.FontSize = 200

doc.recompute()
}}
}}

==Links==

* Tutorial: [http://www.youtube.com/watch?v=nxNT0KychcY Projecting dimensions on a Drawing Page]
<div class="mw-translate-fuzzy">
{{Draft Tools navi/tr}}
{{Userdocnavi/tr}}
</div>

{{Draft Tools navi{{#translation:}}}}
{{Userdocnavi{{#translation:}}}}

Latest revision as of 04:58, 9 January 2024

Boyut

Menü konumu
Taslak → Boyut
Tezgahlar
Taslak, Mimari
Varsayılan kısayol
D I
Versiyonda tanıtıldı
0.18
Ayrıca bkz
FlipDimension,Teknik resim

Description

Açıklama

Boyut aracı, iki nokta arasındaki mesafeyi ölçen ve görüntüleyen bir nesne oluşturur; üçüncü bir nokta, boyut çizgisinin konumunu belirtir.

Araç, doğrudan katı gövdelere tutturulmuş kenarları veya çizgileri ölçebilir; Gövde değişirse, boyut kendini günceller. Araç ayrıca Yay veya Doldur, Eskiz Dolgu oluştur ve Prça tasarım Dolgu işlemleri ile üretilenler gibi eğrilik çapını veya yarıçapını da ölçebilir.

Ortaya çıkan boyut 3D görünümüne yerleştirilir ve bir Taslak nesnesi olarak kabul edilir. Bu nesne, Teknik resim Yeni Eskiz veya Teknik resim Yeni Yay araçlarını kullanarak Teknik resim tezgahı sayfasında görüntülenebilir. Bu araçlar teknik çizimler hazırlamak içindir, bu yüzden boyutları 3D çizimde değil, sadece çizim sayfasında oluştururlar.

Üç nokta tarafından tanımlanan boyut

Create

See also: Draft Tray, Draft Snap and Draft Constrain.

Usage linear dimension

Nasıl kullanılır

  1. Taslak Boyut düğmesine basın veya D ardından I tuşları.
  2. 3D görünümünde bir noktaya tıklayın veya bir koordinat yazın ve Nokta ekle düğmesine basın.
  3. 3D görünümünde ikinci bir noktaya tıklayın veya bir koordinat yazın ve Nokta ekle düğmesine basın. İlk iki nokta ölçülen mesafeyi tanımlar.
  4. 3D görünümünde üçte birini tıklayın veya bir koordinat yazın ve düğmesine basın. Son nokta, ölçüm çizgisinin konumunu tanımlar.

Usage radial dimension

  1. Optionally select a circular edge in the 3D view.
  2. There are several ways to invoke the command:
    • Press the Draft Dimension button.
    • Select the Annotation → Dimension option from the menu.
    • Use the keyboard shortcut: D then I.
  3. The Dimension task panel opens. See Options for more information.
  4. If you have not yet selected an edge do one of the following:
    • Press E or the Select edge button and select a circular edge in the 3D view.
    • Hold down the Alt key, select a circular edge in the 3D view and release the Alt key.
  5. To position the dimension line do one of the following:
    • For a diameter dimension:
      • Pick a point in the 3D view, or type coordinates and press the Enter point button.
    • For a radial dimension:
      • Hold down the Shift key and pick a point in the 3D view.

Usage angular dimension

  1. There are several ways to invoke the command:
    • Press the Draft Dimension button.
    • Select the Annotation → Dimension option from the menu.
    • Use the keyboard shortcut: D then I.
  2. The Dimension task panel opens. See Options for more information.
  3. Do one of the following:
    • Press E or the Select edge button and select a first straight edge in the 3D view. Repeat this to select a second straight edge.
    • Hold down the Alt key, select two straight edges in the 3D view and release the Alt key.
  4. To position the dimension arc pick a point in the 3D view.
  5. The displayed angle depends on the edges and the picked point.

Options

The single character keyboard shortcuts available in the task panel can be changed. See Draft Preferences. The shortcuts mentioned here are the default shortcuts (for version 0.22).

Seçenekler

  • Verilen eksendeki bir sonraki noktayı sınırlamak için bir noktadan sonra X, Y veya Z tuşlarına basın.
  • Koordinatları manuel olarak girmek için sayıları girin, ardından her bir X, Y ve Z bileşeni arasında Enter tuşuna basın. Noktayı yerleştirmek istediğiniz değerleri aldığınızda Nokta ekle düğmesine basabilirsiniz.
  • Göreceli moduna geçmek için R tuşuna basın veya onay kutusunu tıklayın. Göreceli mod açıksa, bir sonraki noktanın koordinatları bir öncekine göredir; değilse, kesindir, Eksenden alınır (0,0,0).
  • Devam moduna geçmek için T tuşuna basın veya onay kutusunu tıklayın. Devam modu açıksa, son noktayı verdikten sonra Boyut aracı yeniden başlatılır ve araç düğmesine tekrar basmadan başka bir boyut çizmenize izin verilir; Aşağıdaki boyutlar önceki boyutun son noktasından başlayacak ve aynı temel çizgiyi paylaşacaktır.
  • Yakalama noktanızı mesafeden bağımsız olarak, en yakın çeki konumuna yönlendirmek için çizim yaparken Ctrl tuşunu basılı tutun.
  • Bir önceki noktaya göre Kısıtlama bir sonraki noktanızı yatay veya dikey olarak çizerken ve çap ve yarıçap modları arasında geçiş yapmak için Shift tuşunu basılı tutun.
  • Geçerli komutu iptal etmek için Esc veya Close düğmesine basın ve devam boyutlarını bitirin; önceden yerleştirilmiş boyutlar kalacaktır.

Convert

Usage

  1. Select one or more Std MeasureDistance objects.
  2. There are several ways to invoke the command:
    • Press the Draft Dimension button.
    • Select the Annotation → Dimension option from the menu.
    • Use the keyboard shortcut: D then I.
  3. Each selected object is replaced by a non-parametric linear Draft Dimension.

Notes

Boyut, ağaç görünümündeki öğeye çift tıklayarak veya Taslak Düzenle düğmesine basarak düzenlenebilir. Ardından noktaları yeni bir konuma getirebilirsiniz.

Özellikler

See also: Property editor.

A Draft Dimension object is derived from an App FeaturePython object and inherits all its properties. The following properties are additional unless otherwise stated:

Data linear and radial dimension

Dimension

Veri

  • Veri Start: ölçülecek mesafenin başlangıç noktasını belirtir.
  • Veri End: ölçülecek mesafenin bitiş noktasını belirtir.
  • Veri Dimline: boyut çizgisinin geçmesi gereken bir noktayı belirtir.
  • Veri Distance: (salt okunur) ölçülen uzunluğu belirtir.
  • Veri Diameter: true ise, bir çap boyutu görüntüler; aksi takdirde bir yarıçap boyutu görüntüler; Bu özellik yalnızca boyut dairesel bir yaya bağlıysa çalışır.

Linear/radial dimension

  • VeriDirection (Vector): specifies the direction of the measurement.
  • VeriDistance (Length): (read-only) specifies the value of the measurement.
  • VeriEnd (VectorDistance): specifies the end point of the measurement.
  • VeriStart (VectorDistance): specifies the start point of the measurement.

Radial dimension

  • VeriDiameter (Bool): specifies if a radial dimension is displayed as a diameter dimension. Not used for linear dimensions.

Data angular dimension

Angular dimension

  • VeriAngle (Angle): (read-only) specifies the value of the measurement.
  • VeriCenter (VectorDistance): specifies the center of the measurement.
  • VeriFirst Angle (Angle): specifies the start angle of the measurement.
  • VeriLast Angle (Angle): specifies the end angle of the measurement.

Dimension

  • VeriDimline (VectorDistance): specifies the point through which the dimension arc passes.
  • Veri (hidden)Linked Geometry (LinkSubList): not used.
  • Veri (hidden)Normal (Vector): specifies the normal of the plane of the dimension.
  • Veri (hidden)Support (Link): not used.

View

Annotation

  • GörünümAnnotation Style (Enumeration): specifies the annotation style applied to the dimension. See Draft AnnotationStyleEditor.
  • GörünümScale Multiplier (Float): specifies the general scaling factor applied to the dimension.

Display Options

  • GörünümDisplay Mode (Enumeration): specifies how the text is displayed. If it is World the text will be displayed on a plane defined by the VeriNormal of the measurement. If it is Screen the text will always face the screen. This is an inherited property. The mentioned options are the renamed options (introduced in version 0.21).

Graphics

Görünüm

  • Görünüm Ext Lines: Ölçüm noktalarından boyut çizgisine giden uzatma hatlarının maksimum uzunluğunu belirtir.
  • Görünüm Ext Overshoot: uzantı çizgilerinin boyut çizgisinin ötesindeki ek uzunluğunu belirtir.
  • Görünüm Dim Overshoot: boyut çizgisine eklenen ilave uzunluğu belirtir.
* Görünüm Arrow Size: boyut çizgisinin sonunda görüntülenen sembolün boyutunu belirtir. 
  • Görünüm Arrow Type: "Çizgi", "Daire", "Ok" veya "Tik" olabilen, boyut çizgisinin sonunda görüntülenen sembolün türünü belirtir.
  • Görünüm Flip Arrows: sembollerin boyut çizgisinin uçlarında çevrilip çevrilmeyeceğini belirtir; sadece bu semboller ok ise işe yarar.
  • Görünüm Font Name: metni çizmek için kullanılacak fontu belirtir. "Arial" gibi bir font adı, "sans", "serif" veya "mono" gibi bir varsayılan stil, "Arial, Helvetica, sans" gibi bir aile veya "gibi bir stil içeren bir ad olabilir. Arial: "Kalın. Belirtilen font sistemde bulunmuyorsa, bunun yerine genel olan kullanılır.
  • Görünüm Font Size: harflerin boyutunu belirtir. Boyut nesnesi ağaç görünümünde oluşturulmuşsa ancak metin görünmüyorsa, görünene kadar metnin boyutunu artırın.
  • Görünüm Flip Text: ölçümü gösteren metnin yönünün çevrilip çevrilmeyeceğini belirtir.
  • Görünüm Text Position: orijine (0,0,0) atıfta bulunulan metnin mutlak koordinatlardaki konumunu belirtir; metni boyut çizgisinin yanında görüntülemek için bu özelliği varsayılan değerinde (0,0,0) bırakın.
  • Görünüm Text Spacing: Metin ve boyut çizgisi arasındaki boşluğu belirtir.
  • Görünüm Override: gerçek ölçüm yerine görüntülenecek özel bir metin belirtir. Ölçüm değerini görüntülemek için metnin içindeki $ dim dizesini kullanın.
  • Görünüm Decimals: ölçümde görüntülenecek ondalık basamak sayısını belirtir.
  • Görünüm Show Unit: true ise, birim ölçümün sayısal değerinin yanında görüntülenir.
  • Görünüm Unit Override: ölçümü "örneğin" km "," m "," cm "," mm "," mi "," ft "," in "olarak ifade edeceği bir birim belirtir. ; varsayılan birimleri kullanmak için bu özelliği boş bırakın. 0.17 sürümünde kullanılabilir

Text

  • GörünümFlip Text (Bool): specifies whether to flip the orientation of the text.
  • GörünümFont Name (Font): specifies the font used to draw the text. It can be a font name, such as Arial, a default style such as sans, serif or mono, a family such as Arial,Helvetica,sans, or a name with a style such as Arial:Bold. If the given font is not found on the system, a default font is used instead.
  • GörünümFont Size (Length): specifies the size of the letters. The text can be invisible in the 3D view if this value is very small.
  • GörünümOverride (String): specifies a custom text to display instead of the actual measurement. Use the string $dim inside the text to include the measurement.
  • GörünümText Color (Color): specifies the color of the text. introduced in version 0.21
  • GörünümText Position (VectorDistance): specifies the position of the text in absolute coordinates. [0, 0, 0] will display the text in its default position near the dimension line or arc.
  • GörünümText Spacing (Length): specifies the space between the text and the dimension line or arc.

Units

  • GörünümDecimals (Integer): specifies the number of decimal places to display for the measurement.
  • GörünümShow Unit (Bool): specifies whether to display the unit next to the numerical value of the measurement. Not used for angular dimensions.
  • GörünümUnit Override (String): specifies the unit in which to express the measurement, for example, km, m, cm, mm, mi, ft, in or arch for arch units. Leave this blank to use the default unit. Not used for angular dimensions.

Scripting

Betik

Ayrıca bkz.: Taslak API ve FreeCAD Betik esasları.

Boyut aracı, aşağıdaki işlevi kullanarak makrolar ve Python konsolundan kullanılabilir:

dimension = make_dimension(p1, p2, p3=None, p4=None)

Kendisine iletilen argümanlara bağlı olarak, bu işlevi çağırmanın çeşitli yolları vardır:

dimension = make_dimension(p1, p2, p3=None)
dimension = make_dimension(object, i1, i2, p4=None)
dimension = make_dimension(object, i1, mode, p4=None)
  • p1 ve p2 noktaları arasındaki mesafeyi ölçerek doğrusal bir Dimension oluşturur.
  • object 'a bağlı, i1 ve i2 endeksli köşeleri arasındaki mesafeyi ölçen doğrusal bir Dimension oluşturur.
  • object 'a bağlı, i1, ölçülecek eğri kenarının dizini ve mode ya { Boyut türünü belirtmek için {incode | "radius"}} veya "çap".
    • İlk aramada p3 ve diğer ikisinde de p4, boyut çizgisinin geçmesi gereken isteğe bağlı bir nokta belirtin.
    • Tüm noktalar FreeCAD.Vector ile tanımlanır.

Açısal bir boyut oluşturmak için aşağıdaki işlevi kullanın:

dimension = make_angular_dimension(center, angles, p3, normal=None)
dimension = make_angular_dimension(center, [angle1, angle2], p3, normal=None)
  • Verilen center noktasından, iki öğeli angles listesinden ve arkasından gelen p3 noktasından açısal bir Dimension oluşturur. gitmelisin.
    • Eğer angle1> angle2 ise, görüntülenen açı angle1 - angle2 farkıdır; Aksi halde, ek açı gösterilir 360 - (angle2 - angle1).
    • Açıları radyan cinsinden verilmelidir; math.radians () işlevi, derece olarak verilen açıları dönüştürmek için kullanılabilir.

Dimension görünüm özellikleri niteliklerinin üzerine yazılarak değiştirilebilir; örneğin, ViewObject.FontSize üzerine, yeni boyutun milimetre cinsinden üzerine yazın.

Örnek:

import FreeCAD as App
import Draft

doc = App.newDocument()

p1 = App.Vector(0, 0, 0)
p2 = App.Vector(1000, 1000, 0)
p3 = App.Vector(-2500, 0, 0)
dimension1 = Draft.make_dimension(p1, p2, p3)
dimension1.ViewObject.FontSize = 200

polygon = Draft.make_polygon(3, radius=1000)
doc.recompute()

p4 = App.Vector(-2000, 1500, 0)
dimension2 = Draft.make_dimension(polygon, 1, 2, p4)
dimension2.ViewObject.FontSize = 200

center = App.Vector(2000, 0, 0)
p5 = App.Vector(3000, 1000, 0)
angle1 = 45
angle2 = 10
dimension3 = Draft.make_angular_dimension(center, [angle1, angle2], p5)
dimension3.ViewObject.FontSize = 200

dimension4 = Draft.make_angular_dimension(center, [angle2, angle1], p5*1.2)
dimension4.ViewObject.FontSize = 200

doc.recompute()