CAM Fixture/de

From FreeCAD Documentation
This page is a translated version of the page CAM Fixture and the translation is 40% complete.

Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.

Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).

Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.

CAM Fixture

Menu location
CAM → Supplemental Commands → Fixture
Workbenches
CAM
Default shortcut
None
Introduced in version
-
See also
None

Beschreibung

The tool Fixture sets the Work Offset Coordinate Fixture of the machine CNC controller.

Target Work Offset Coordinates typically include: Fixtures G53 to G59. The G-code is simply the Fixture (G53, G54, etc...). The coordinate offset fixtures represent:

  • G53 → Machine coordinate system.
  • G54 → Scratchpad coordinate system.
  • G55 to G59.9 → Coordinate fixtures allowing work offsets, relative to Homing switches located on the CNC machine, to be used.

The G59 Fixture is used to expand available fixtures. The degree of expansion implemented is CNC machine specific, and this command allows provides for G59.1 to G59.9.

Anwendung

  1. Press the Fixture button or use the P then F keyboard shortcut.
  2. Select the desired Work Offset Fixture from the drop-menu.

Eigenschaften

  • DatenFixture: Sets the current fixture point
  • DatenActive: Defines if this command is active or not when inserted into a compound

Hinweise

Einschränkungen

Skripten