Jump to content

Fixtura de trayectoria

From FreeCAD Documentation
This page is a translated version of the page CAM Fixture and the translation is 25% complete.
Outdated translations are marked like this.
THIS COMMAND IS OBSOLETE
It is not available in 1.1 and above.

Fixtura de trayectoria

Ubicación en el Menú
Trayectoria → Comandos Parciales → Fixtura
Entornos de trabajo
Trayectoria
Atajo de teclado por defecto
P F
Introducido en versión
-
Ver también
Ninguno

Descripción

Esta herramienta coloca un punto de fixtura (G53-G59) para las siguientes operaciones

Target Work Offset Coordinates typically include: Fixtures G53 to G59. The G-code is simply the Fixture (G53, G54, etc...). The coordinate offset fixtures represent:

  • G53 → Machine coordinate system.
  • G54 → Scratchpad coordinate system.
  • G55 to G59.9 → Coordinate fixtures allowing work offsets, relative to Homing switches located on the CNC machine, to be used.

The G59 Fixture is used to expand available fixtures. The degree of expansion implemented is CNC machine specific, and this command allows provides for G59.1 to G59.9.

Utilización

  1. Presiona el boton Fixtura
  2. Coloca la fixtura deseada

Propiedades

  • DatosFixtura: Coloca el actual punto como fixtura
  • DatosActivar: Define si este comando esta activo o no cuando es introducido a un compuesto.

Notes

Limitations

Scripting