Assembly3 BewegungAufzeichnen

From FreeCAD Documentation
Revision as of 10:22, 15 July 2022 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.

Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).

Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.

Other languages:

Assembly3 BewegungAufzeichnen

Menüeintrag
Assembly3 → Trace part move
Arbeitsbereich
Assembly3
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Keiner

Beschreibung

Der Befehl Bewegung aufzeichnen macht...

Anwendung

  1. Den Befehl Bewegung aufzeichnen aktivieren durch:

Notes

  • If you don't select any shape in the first step, you will be tracing the moving shape.
  • To change the element to trace, you need to disable this tool before selecting a new element and enabling it again.
  • If you control the movement with another tool such as this kinematic controller that allows to use a mover tool in parallel, you could use this tool to alter the assembly step by step and use the mover tool to add a point and connecting line on each step. It is possible to use the mover tool as a trigger by picking and dragging any of the arrows - just a tiny bit until the next point and line appears (use transparency if necessary).
(I hope there will be a more elegant way in the future)