Assembly3 ConstraintSymmetricLine/de: Difference between revisions

From FreeCAD Documentation
(Created page with "== Anwendung ==")
(Created page with "== Beschreibung ==")
Line 17: Line 17:
}}
}}


== Description ==
== Beschreibung ==


This tool builds a link between two or three objects of an assembly. The selected elements of each object or more precisely their implicit coordinate systems (ICS) are used to position the objects to each other.
This tool builds a link between two or three objects of an assembly. The selected elements of each object or more precisely their implicit coordinate systems (ICS) are used to position the objects to each other.

Revision as of 20:57, 11 September 2021

Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.

Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).

Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.

Other languages:

Assembly3 ConstraintSymmetricLine

Menu location
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Beschreibung

This tool builds a link between two or three objects of an assembly. The selected elements of each object or more precisely their implicit coordinate systems (ICS) are used to position the objects to each other.

Based on one line element's ICS both other elements' ICSs' origins are positioned to have identical z-coordinates and the same x- and y-offsets in opposite directions.

Anwendung

  1. Place two objects into an assembly
  2. Select two point elements of one object
  3. Select a straight line element of the other object
  4. Press the Symmetric line button.

Or

  1. Place three objects into an assembly
  2. Select one point element of the first two objects
  3. Select a straight line element of the third object
  4. Press the Symmetric line button.