Assembly3 RichtungenAngleichen
Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.
Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).
Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.
File:Assembly ConstraintSameOrientation Assembly3 Richtungen angleichen |
Menüeintrag |
---|
Keiner |
Arbeitsbereich |
Assembly3 |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
- |
Siehe auch |
Keiner |
Beschreibung
This tool builds a link between two or more objects of an assembly and matches their orientation. The selected elements of each object or more precisely their implicit coordinate systems (ICS) are used to position one object to another.
Assuming the first object is already locked in place by the Lock constraint then the following objects are moved to positions where all ICSs have the same orientation i.e. all z-axes are parallel and all x-axes are parallel (making the y-axes parallel as well).
The offset of their origins in x-, y- and z-direction are not defined. Related to the first object the following objects can still move along the x-, y- and z-axis. This is leaving 3 degrees of freedom (DOFs) for each link unconstrained.
The constraint accepts planar faces.
Usage
- Place two or more objects into an assembly
- Select one planar face element of each object
- Press the Same orientation button.
- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzlicher Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Programmeinstellungen, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, Hilf FreeCAD, Spende
- Hilfe: Tutorien, Video Tutorien
- Arbeitsbereiche: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework